User:MarcPase/sandbox

Solidator
Solidator is a 3D printer from tangible-engineering headquartered in Stuttgart, Germany.

Products
The high-speed, large-format DLP 3D Printer Solidator, which has been on the market since 2013 and is undergoing continuous development. The printer is optimized for the field of engineering and small-series production and is aimed at commercial customers.

Solidator V1
The Solidator V1 was a successful Kickstarter campaign in 2013 with over 144.000$. The printer has a build volume of 280x210x200 mm (11.02"x 8,26"x7,87"). The outstanding printing speed makes it possible to create objects of build volume in just 6 hours. The construction time is reduced in proportion to the height and via Dynamic Pixel Cure even with a small cross-section up to 50% additional. A 5x5x5 cm (1,96” x 1,96” x 1,96”) object can be created in about 45 minutes. The resolution of the printer is XY 270 Micron (0.0106") and in Z 30 - 100 Micron (0,00112” – 0,0039”).

Solidator V2
The Solidator V2 was launched at April 2017. The printer has a build volume of 336 x 210 x 200 mm (13.22" x 8.26" x 7.87") and thus offers the biggest build area in the class of DLP printers. The outstanding printing speed of up to more than 2100 cm³ / h (129 in³ / hour) makes it possible to create objects of build volume in just 6 hours. The construction time is reduced in proportion to the height and via Dynamic Pixel Cure even with a small cross-section up to 50% additional. A 5x5x5 cm (1,96” x 1,96” x 1,96”) object can be created in about 45 minutes. The resolution of the printer is XY 175 Micron (0.069") and in Z 30 - 100 Micron (0,00112” – 0,0039”). Thus, the usual requirements for the precision of plastic parts can be covered.