User:Max Lederman/de Brony

Summary
I modified Gaspard de Prony's page, making edits to the section on his trigonometric and logarithmic tables. I added the section about mapping and of the failure of the tables, in addition to adding information about the two of the tiers of workers who computed the tables.

= Gaspard de Prony = From Wikipedia, the free encyclopedia Jump to navigationJump to search Baron Gaspard Clair François Marie Riche de Prony (22 July 1755 – 29 July 1839) was a French mathematician and engineer, who worked on hydraulics. He was born at Chamelet, Beaujolais, France and died in Asnières-sur-Seine, France.

Contents

 * 1Education and early works
 * 2The trigonometric and logarithmic tables of the cadastre
 * 2.1Enlightenment calculations
 * 2.2Influence on the meaning of calculation
 * 2.3Mechanizing calculation
 * 2.4Influence on Charles Babbage
 * 3Prony's brake
 * 4Prony's estimation method
 * 5Distinctions
 * 6See also
 * 7References
 * 8External links

Education and early works[edit]
He was Engineer-in-Chief of the École Nationale des Ponts et Chaussées.

The trigonometric and logarithmic tables of the cadastre[edit]
In 1791, de Prony embarked on the task of producing logarithmic and trigonometric tables for the French Cadastre. The effort was sanctioned by the French National Assembly, which, after the French Revolution wanted to bring uniformity to the multiple measurements and standards used throughout the nation. In particular, his tables were intended for precise land surveys, as part of a greater cadastre effort. The tables were vast, with values calculated to between fourteen and twenty-nine decimal places.

Inspired by Adam Smith's Wealth of Nations, de Prony divided up the labor into three levels, bragging that he "could manufacture logarithms as easily as one manufactures pins."

The first level consisted of five or six high-ranking mathematicians with sophisticated analytical skills, including Adrien-Marie Legendre and Lazare Carnot. This group chose the analytical formulas most suited to evaluation by numerical methods, and specified the number of decimals and the numerical range the tables were to cover.

The second group of lesser mathematicians, seven or eight in number, combined analytical and computational skills, and this group calculated the pivotal values using the formulas provided and the sets of starting differences. They also prepared templates for the human computers, and the first worked row of calculations, as well as the instructions for the computers to carry the sequence to completion.

The third group consisted of sixty to ninety human computers. These had no more than a rudimentary knowledge of arithmetic and carried out the most laborious and repetitive part of the process. Many were out-of-work hairdressers, because, with the guillotining of the aristocracy, the hairdressing trade, which had tended the elaborate hairstyles of the elite, was in recession.

Due to a lack of funding from inflation following the French revolution, the tables were never published in full. The first excerpt of the table was published a century later.

Enlightenment calculations[edit]
According to Prony, the project was to leave "nothing to desire with respect to exactitude" and to be "the most vast... monument to calculation ever executed or even conceived." The tables were not used for their original purpose of bringing consistent standards for measurement, as the entire cadastre project saw delays in establishing both new measurement units as well as budget cuts. In particular, these tables, which were designed for the decimal division of circles and time, turned out to be obsolete after the French had changed their measurement system. Moreover, there was no practical use for the full extent of de Prony's calculation's accuracy. Hence, these tables became more of artifacts and monuments to Enlightenment rather than objects of practical use.

Influence on the meaning of calculation[edit]
By the turn of the 19th century, there was a shift in the meaning of calculation. The talented mathematicians and other intellectuals who produced creative and abstract ideas were regarded separately from those who were able to perform tedious and repetitive computations. Before the 19th century, calculation was regarded as a task for the academics, while afterwards, calculations were associated with unskilled laborers. This was accompanied by a shift in gender roles as well, as women, who were usually underrepresented in mathematics at the time, were hired to perform extensive computations for the tables as well as other computational government projects until the end of World War II. This shift in the interpretation of calculation was largely due to de Prony's calculation project during the French Revolution. This project was able to unite people from many different walks of life as well as mathematical abilities (in the traditional sense) and hence changed the meaning of calculation from intelligence into unskilled labor.

Mechanizing calculation[edit]
Prony was able to have artisans (workers who excelled in mechanical arts that require intelligence) work along with mathematicians to perform the calculations. Prony noted a few interesting observations about this new dynamic. First, it was fascinating to see so many different people work on the same problem. Second, he realized that even the ones with the least intellectual ability were able to perform these computations with astonishingly few errors. Prony saw this entire system as a collection of human computers working together as a whole - a machine governed by hierarchical principles of the division of labor. In fact, Prony may have begun to amend his notion of intelligence, which he began to use to evaluate the system as a whole, rather than evaluating the intelligence of its constituents.

Influence on Charles Babbage[edit]
Charles Babbage, credited with inventing the first mechanical computer, referred in detail to de Prony's project and was seized by the idea that the labours of the unskilled computers could be taken over completely by machinery.

Prony's brake[edit]
Main article: De Prony brake

One of de Prony's important scientific inventions was the "brake" which he invented in 1821 to measure the torque produced by an engine.

He also was first to propose using a reversible pendulum to measure gravity, which was independently invented in 1817 by Henry Kater and became known as the Kater's pendulum.

Prony's estimation method[edit]
Prony created a method of converting sinusoidal and exponential curves into a systems of linear equations. Prony estimation is used extensively in signal processing and finite element modelling of non linear materials.

Distinctions[edit]
Prony was a member, and eventually president, of the French Academy of Science. He was also elected a foreign member of the Royal Swedish Academy of Sciences in 1810. His name is one of the 72 names inscribed on the Eiffel Tower. A street, Rue de Prony, in the 17th arrondissement of Paris is named after him.

= Gaspard de Prony = From Wikipedia, the free encyclopedia Jump to navigationJump to search Baron Gaspard Clair François Marie Riche de Prony (22 July 1755 – 29 July 1839) was a French mathematician and engineer, who worked on hydraulics. He was born at Chamelet, Beaujolais, France and died in Asnières-sur-Seine, France.

Contents

 * 1Education and early works
 * 2The trigonometric and logarithmic tables of the cadastre
 * 2.1Enlightenment calculations
 * 2.2Influence on the meaning of calculation
 * 2.3Mechanizing calculation
 * 2.4Influence on Charles Babbage
 * 3Prony's brake
 * 4Prony's estimation method
 * 5Distinctions
 * 6See also
 * 7References
 * 8External links

Education and early works[edit]
He was Engineer-in-Chief of the École Nationale des Ponts et Chaussées. The trigonometric and logarithmic tables of the cadastre In 1791, de Prony embarked on the task of producing logarithmic and trigonometric tables for the French Cadastre. The effort was sanctioned by the French National Assembly, which, after the French Revolution wanted to bring uniformity to the multiple measurements and standards used throughout the nation. In particular, his tables were intended for precise land surveys, as part of a greater cadastre effort. The tables were vast, calculating logarithms from 1 to 200,000 with values calculated to between fourteen and twenty-nine decimal places (which de Prony recognized was excessively precise).

Inspired by Adam Smith's Wealth of Nations, de Prony divided up the labor into three levels, bragging that he "could manufacture logarithms as easily as one manufactures pins."

The first level consisted of five or six high-ranking mathematicians with sophisticated analytical skills, including Adrien-Marie Legendre and Lazare Carnot. This group chose the analytical formulas most suited to evaluation by numerical methods, and specified the number of decimals and the numerical range the tables were to cover.

The second group of lesser mathematicians, seven or eight in number, '''were known as the "planners" and had previous experience as computers in the cadastre, mainly with experience having to do with practical mathematics. The planners combined analytical and computational skills, with this group calculating''' the pivotal values using the formulas provided and the sets of starting differences. They also prepared templates for the human computers, and the first worked row of calculations, as well as the instructions for the computers to carry the sequence to completion, in addition to correcting any. '''Finally, this group was tasked with verifying all the calculations made by the human computers. Since recalculating every value would have been excessive labor and would have nullified the use of the lowest level computers since their tasks would have been completely repeated, the planners used a method knows as "differencing," where they compared adjacent values in the tables, checking for any discrepancies.'''

The third group consisted of sixty to ninety human computers. These had no more than a rudimentary knowledge of arithmetics and carried out the most laborious and repetitive part of the process. Many were out-of-work hairdressers, because, with the guillotining of the aristocracy, the hairdressing trade, which had tended the elaborate hairstyles of the elite, was in recession. '''Due to their lack of experience, they only had to calculate simple problems of addition and subtraction. In addition, this group did not operate under a factory-like model, instead opting to work from home, sending their results and receiving their new tasks from the planners in a non-centralized manner. These calculators could produce an average of around 700 calculations a day.'''

Importance for mapping
'''The tables developed by de Prony's team were doubly important for French metric cartography. Firtstly, at the time, sailors need logarithms for math pertaining to spherical geometry, meaning this was a necessity to quickly and accurately position themselves to guarantee safe and efficient travel across the seas. However, the implementation of the new French Revolutionary metric system would have meant that the old logarithmic tables would be obsolete, and French sailors would have been unwilling to switch measurement systems since it would have rendered positional calculations significantly more difficult and less precise. Thus, de Prony, by making new logarithmic tables for the new metric system, would have facilitated the transition, enabling sailors to adopt the system. The second key element was that trigonometric values were needed for cadastral measures. Thus, for accurate mapping of the French territory and its subdivisions all the way down to the lowest levels of property ownership, de Prony needed to complete the trigonometric tables. These were both seen as crucial for Revolutionary pride considering the importance of naval prowess at the time and the need for administrative efficiency.'''

Enlightenment calculations
According to Prony, the project was to leave "nothing to desire with respect to exactitude" and to be "the most vast... monument to calculation ever executed or even conceived." The tables were not used for their original purpose of bringing consistent standards for measurement, as the entire cadastre project saw delays in establishing both new measurement units as well as budget cuts. In particular, these tables, which were designed for the decimal division of circles and time, turned out to be obsolete after the French had changed their measurement system. Moreover, there was no practical use for the full extent of de Prony's calculation's accuracy. Hence, these tables became more of artifacts and monuments to Enlightenment rather than objects of practical use.

Influence on the meaning of calculation
By the turn of the 19th century, there was a shift in the meaning of calculation. The talented mathematicians and other intellectuals who produced creative and abstract ideas were regarded separately from those who were able to perform tedious and repetitive computations. Before the 19th century, calculation was regarded as a task for the academics, while afterwards, calculations were associated with unskilled laborers. This was accompanied by a shift in gender roles as well, as women, who were usually underrepresented in mathematics at the time, were hired to perform extensive computations for the tables as well as other computational government projects until the end of World War II. This shift in the interpretation of calculation was largely due to de Prony's calculation project during the French Revolution. This project was able to unite people from many different walks of life as well as mathematical abilities (in the traditional sense) and hence changed the meaning of calculation from intelligence into unskilled labor.

Mechanizing calculation
Prony was able to have artisans (workers who excelled in mechanical arts that require intelligence) work along with mathematicians to perform the calculations. Prony noted a few interesting observations about this new dynamic. First, it was fascinating to see so many different people work on the same problem. Second, he realized that even the ones with the least intellectual ability were able to perform these computations with astonishingly few errors. Prony saw this entire system as a collection of human computers working together as a whole - a machine governed by hierarchical principles of the division of labor. In fact, Prony may have begun to amend his notion of intelligence, which he began to use to evaluate the system as a whole, rather than evaluating the intelligence of its constituents.

Influence on Charles Babbage
Charles Babbage, credited with inventing the first mechanical computer, was inspired by de Prony's take on Smith's division of labor. He agreed with the three tiered system, however, Babbage was seized by the idea that the labours of the unskilled computers could be taken over completely by machinery. This would have kept only the two highest groups human, and also would have transformed the role of the planners into a maintenance group for the machine.

Failure of the tables to be popularly implemented
'''The French Revolutionary government passed the law making the metric system the official measurement system in 1795, yet did not include the decimal angle measurement, making much of de Prony's work worthless since it would not be official. This also meant that the funding needed for de Prony to finish creating and then to publish his tables dried up. De Prony continued his work until 1800, but due to his publisher bankrupting, the work was not seen by the public eye until the first excerpt of the table was published a century later. The Napoleonic government abandoned the project, before abandoning the metric system entirely in 1812 dooming de Prony's work.'''

Prony's brake[edit]
Main article: De Prony brake

One of de Prony's important scientific inventions was the "brake" which he invented in 1821 to measure the torque produced by an engine.

He also was first to propose using a reversible pendulum to measure gravity, which was independently invented in 1817 by Henry Kater and became known as the Kater's pendulum.

Prony's estimation method[edit]
Prony created a method of converting sinusoidal and exponential curves into a systems of linear equations. Prony estimation is used extensively in signal processing and finite element modelling of non linear materials.

Distinctions[edit]
Prony was a member, and eventually president, of the French Academy of Science. He was also elected a foreign member of the Royal Swedish Academy of Sciences in 1810. His name is one of the 72 names inscribed on the Eiffel Tower. A street, Rue de Prony, in the 17th arrondissement of Paris is named after him.

= "Sophia Carino" Edits =

= Gaspard de Prony = [...]

Education and early works[edit]
He was Engineer-in-Chief of the École Nationale des Ponts et Chaussées. The trigonometric and logarithmic tables of the cadastre In 1791, de Prony embarked on the task of producing logarithmic and trigonometric tables for the French Cadastre. The effort was sanctioned by the French National Assembly, which, after the French Revolution wanted to bring uniformity to the multiple measurements and standards used throughout the nation. In particular, his tables were intended for precise land surveys, as part of a greater cadastre effort. The tables were vast, calculating logarithms from 1 to 200,000 with values calculated to between fourteen and twenty-nine decimal places (which de Prony recognized was excessively precise). ''[Do these additions need citations? -sophiaacarino]''

Inspired by Adam Smith's Wealth of Nations, de Prony divided up the labor into three levels, bragging that he "could manufacture logarithms as easily as one manufactures pins."

The first level consisted of five or six high-ranking mathematicians with sophisticated analytical skills, including Adrien-Marie Legendre and Lazare Carnot. This group chose the analytical formulas most suited to evaluation by numerical methods, and specified the number of decimals and the numerical range the tables were to cover.

The second group of lesser mathematicians, seven or eight in number, were known as the "planners" and had previous experience as computers in the cadastre, mainly with experience having to do with practical mathematics. [Needs a citation] The planners combined analytical and computational skills, with this group calculating the pivotal values using the formulas provided and the sets of starting differences. They also prepared templates for the human computers, and the first worked row of calculations, as well as the instructions for the computers to carry the sequence to completion, in addition to correcting any. '''Finally, this group was tasked with verifying all the calculations made by the human computers. Since recalculating every value would have been excessive labor and would have nullified the use of the lowest level computers since their tasks would have been completely repeated, the planners used a method knows known as "differencing," where they compared adjacent values in the tables, checking for any discrepancies.' [the crossed out parenthetical expression seems unnecessary and I think you still get your point across without it. Also you should add all your citations to the right sentences, such as this one. -sophiaacarino]''

The third group consisted of sixty to ninety human computers. These had no more than a rudimentary knowledge of arithmetic and carried out the most laborious and repetitive part of the process. Many were out-of-work hairdressers, because, with the guillotining of the aristocracy, the hairdressing trade, which had tended the elaborate hairstyles of the elite, was in recession. '''Due to their lack of experience, they only had to calculate simple problems of addition and subtraction. In addition, this group did not operate under a factory-like model, instead opting to work from home, sending their results and receiving their new tasks from the planners in a non-centralized manner. These calculators could produce an average of around 700 calculations a day.' [all needs to be cited -sophiaacarino]''

Importance for mapping
The tables developed by de Prony's team were doubly important for French metric cartography. Firstly, at the time, sailors needed logarithms for math pertaining to spherical geometry, meaning this was a necessity  because they needed to quickly and accurately position themselves to guarantee safe and efficient travel across the seas. [cite] However, the implementation of the new French Revolutionary metric system would have meant that  make the old logarithmic tables would be obsolete, and French sailors would have been  be unwilling to switch measurement systems since it would have rendered positional calculations significantly more difficult and less precise. [cite] '''Thus, de Prony, by making new logarithmic tables for the new metric system, would have facilitated the transition, enabling sailors to adopt the system. The second key element was that trigonometric values were needed for cadastral measures. Thus, for accurate mapping of the French territory and its subdivisions all the way down to the lowest levels of property ownership, de Prony needed to complete the trigonometric tables. These were both seen as crucial for Revolutionary pride, considering the importance of naval prowess at the time, and the need for administrative efficiency.'[cite]''

[...]

Influence on Charles Babbage
Charles Babbage, credited with inventing the first mechanical computer, was inspired by de Prony's take on Smith's division of labor. He agreed with the three-tiered system, however,  but Babbage was seized by the idea that the labours of the unskilled computers could be taken over completely by machinery. This would have kept only  keep the two highest groups human, and also would have transformed  transform the role of the planners into a maintenance group for the machine.

Failure of the tables to be popularly implemented
The French Revolutionary government passed the law making  that made the metric system the official measurement system in 1795, yet  but they '''did not include the decimal angle measurement, making much of de Prony's work worthless since it would not be official. This also meant that the funding needed for de Prony to finish creating and then to  and publish his tables dried up. De Prony continued his work until 1800, but due to his publisher bankrupting  because his publisher went bankrupt, the work was not seen by the public eye until the first excerpt of the table was published a century later. [cite where you got the bankruptcy fact from] The Napoleonic government abandoned the project, before abandoning the metric system entirely in 1812, dooming de Prony's work.' [cite]''

''[I learned a lot about a corner of history I knew nothing about, so thank you! I added hyperlinks to key words where necessary, made suggestions on rearranging some sentences so they flow better, fixed misspellings, added in words you forgot to add, and moved all your citation footnotes to the end of each sentence after the punctuation. Hope this helps and feel free to reject any of my edits. Good luck with your project! -Sophia]''

= PEER REIVEW BY Zhi Zhang =

= Gaspard de Prony = From Wikipedia, the free encyclopedia Jump to navigationJump to search Baron Gaspard Clair François Marie Riche de Prony (22 July 1755 – 29 July 1839) was a French mathematician and engineer, who worked on hydraulics. He was born at Chamelet, Beaujolais, France and died in Asnières-sur-Seine, France.

Contents

 * 1Education and early works
 * 2The trigonometric and logarithmic tables of the cadastre
 * 2.1Enlightenment calculations
 * 2.2Influence on the meaning of calculation
 * 2.3Mechanizing calculation
 * 2.4Influence on Charles Babbage
 * 3Prony's brake
 * 4Prony's estimation method
 * 5Distinctions
 * 6See also
 * 7References
 * 8External links

Education and early works[edit]
He was Engineer-in-Chief of the École Nationale des Ponts et Chaussées.

The trigonometric and logarithmic tables of the cadastre

In 1791, de Prony embarked on the task of producing logarithmic and trigonometric tables for the French Cadastre [Might want to link Cadastre's wikipedia page (there is one!) as I feel that this might be a rather elusive word to people?]. The effort was sanctioned by the French National Assembly, which, after the French Revolution wanted to bring uniformity to the multiple measurements and standards used throughout the nation. In particular, his tables were intended for precise land surveys, as part of a greater cadastre effort. The tables were vast, calculating logarithms from 1 to 200,000 with values calculated to between fourteen and twenty-nine decimal places (which de Prony recognized was excessively precise). [Is there a source for this?]

Inspired by Adam Smith's Wealth of Nations, de Prony divided up the labor into three levels, bragging that he "could manufacture logarithms as easily as one manufactures pins." [Source?]

The first level consisted of five or six high-ranking mathematicians with sophisticated analytical skills, including Adrien-Marie Legendre and Lazare Carnot. This group chose the analytical formulas most suited to evaluation by numerical methods, and specified the number of decimals and the numerical range the tables were to cover.

The second group of lesser mathematicians, seven or eight in number, '''were known as the "planners" and had previous experience as computers in the cadastre, mainly with experience having to do with practical mathematics. The planners combined analytical and computational skills, with this group calculating''' the pivotal values using the formulas provided and the sets of starting differences. They also prepared templates for the human computers, and the first worked row of calculations, as well as the instructions for the computers to carry the sequence to completion, in addition to correcting any. '''Finally, this group was tasked with verifying all the calculations made by the human computers. Since recalculating every value would have been excessive labor and would have nullified the use of the lowest level computers since their tasks would have been completely repeated, the planners used a method knows as "differencing," where they compared adjacent values in the tables, checking for any discrepancies.'''

The third group consisted of sixty to ninety human computers. These had no more than a rudimentary knowledge of arithmetics and carried out the most laborious and repetitive part of the process. Many were out-of-work hairdressers, because, with the guillotining of the aristocracy, the hairdressing trade, which had tended the elaborate hairstyles of the elite, was in recession. '''Due to their lack of experience, they only had to calculate simple problems of addition and subtraction. In addition, this group did not operate under a factory-like model, instead opting to work from home, sending their results and receiving their new tasks from the planners in a non-centralized manner. These calculators could produce an average of around 700 calculations a day.'''

Importance for mapping
'''The tables developed by de Prony's team were doubly important for French metric cartography. Firtstly Firstly, [Typo], at the time, sailors need logarithms for math pertaining to spherical geometry, meaning this was a necessity to quickly and accurately position themselves to guarantee safe and efficient travel across the seas. However, the implementation of the new French Revolutionary metric system would have meant that the old logarithmic tables would be obsolete, and French sailors would have been unwilling to switch measurement systems since it would have rendered positional calculations significantly more difficult and less precise. Thus, de Prony, by making new logarithmic tables for the new metric system, would have facilitated the transition, enabling sailors to adopt the system. The second key element was that trigonometric values were needed for cadastral measures. Thus, for accurate mapping of the French territory and its subdivisions all the way down to the lowest levels of property ownership, de Prony needed to complete the trigonometric tables. These were both seen as crucial for Revolutionary pride considering the importance of naval prowess at the time and the need for administrative efficiency.'''

[Again, would be great to add sources for these claims]

Enlightenment calculations
According to Prony, the project was to leave "nothing to desire with respect to exactitude" and to be "the most vast... monument to calculation ever executed or even conceived." The tables were not used for their original purpose of bringing consistent standards for measurement, as the entire cadastre project saw delays in establishing both new measurement units as well as budget cuts. In particular, these tables, which were designed for the decimal division of circles and time, turned out to be obsolete after the French had changed their measurement system. Moreover, there was no practical use for the full extent of de Prony's calculation's accuracy. Hence, these tables became more of artifacts and monuments to Enlightenment rather than objects of practical use.

Influence on the meaning of calculation
By the turn of the 19th century, there was a shift in the meaning of calculation. The talented mathematicians and other intellectuals who produced creative and abstract ideas were regarded separately from those who were able to perform tedious and repetitive computations. Before the 19th century, calculation was regarded as a task for the academics, while afterwards, calculations were associated with unskilled laborers. This was accompanied by a shift in gender roles as well, as women, who were usually underrepresented in mathematics at the time, were hired to perform extensive computations for the tables as well as other computational government projects until the end of World War II. This shift in the interpretation of calculation was largely due to de Prony's calculation project during the French Revolution. This project was able to unite people from many different walks of life as well as mathematical abilities (in the traditional sense) and hence changed the meaning of calculation from intelligence into unskilled labor.

Mechanizing calculation
Prony was able to have artisans (workers who excelled in mechanical arts that require intelligence) work along with mathematicians to perform the calculations. Prony noted a few interesting observations about this new dynamic. First, it was fascinating to see so many different people work on the same problem. Second, he realized that even the ones with the least intellectual ability were able to perform these computations with astonishingly few errors. Prony saw this entire system as a collection of human computers working together as a whole - a machine governed by hierarchical principles of the division of labor. In fact, Prony may have begun to amend his notion of intelligence, which he began to use to evaluate the system as a whole, rather than evaluating the intelligence of its constituents.

Influence on Charles Babbage
Charles Babbage, credited with inventing the first mechanical computer, was inspired by de Prony's take on Smith's division of labor. He agreed with the three tiered system, however, Babbage was seized by the idea that the labours of the unskilled computers could be taken over completely by machinery. This would have kept only the two highest groups human, and also would have transformed the role of the planners into a maintenance group for the machine.

Failure of the tables to be popularly implemented
'''The French Revolutionary government passed the law making the metric system the official measurement system in 1795, yet did not include the decimal angle measurement, making much of de Prony's work worthless since it would not be official. This also meant that the funding needed for de Prony to finish creating and then to publish [and publishing?] his tables dried up. De Prony continued his work until 1800, but due to his publisher bankrupting, the work was not seen by the public eye until the first excerpt of the table was published a century later. The Napoleonic government abandoned the project, before abandoning the metric system entirely in 1812, [added a comma here] dooming de Prony's work.'''

Prony's brake[edit]
Main article: De Prony brake

One of de Prony's important scientific inventions was the "brake" which he invented in 1821 to measure the torque produced by an engine.

He also was first to propose using a reversible pendulum to measure gravity, which was independently invented in 1817 by Henry Kater and became known as the Kater's pendulum.

Prony's estimation method[edit]
Prony created a method of converting sinusoidal and exponential curves into a systems of linear equations. Prony estimation is used extensively in signal processing and finite element modelling of non linear materials.

Distinctions[edit]
Prony was a member, and eventually president, of the French Academy of Science. He was also elected a foreign member of the Royal Swedish Academy of Sciences in 1810. His name is one of the 72 names inscribed on the Eiffel Tower. A street, Rue de Prony, in the 17th arrondissement of Paris is named after him.

''[Similar to Sophia, I've certainly learnt a lot from your input! My main suggestion would be on citing the relevant sources, as there seem to be a few subjective claims in your edits to the original page. Good luck with the mid-term project! -Zhi]''