User:Mjroots/sandbox2

Please leave any comments about the content of this sandbox on my talk page.

=Non-drainage mill=

Benninkmolen is a smock mill in Doetinchem, Gelderland, Netherlands which was built in 1921 and has been restored to working order. The mill is listed as a Rijksmonument.

History
In 1856, a tower mill was built for B Vels. It was named the Velsmolen. The mill was demolished in 1920 due to its poor condition. The mill was replaced by a smock mill, which used the smock of the Buursinkmolen, Zelhem, Gelderland and machinery from various mills. It had a pair of Patent sails and a pair of Common sails. On 10 August 1925, the mill was severely damaged in a storm. Most of the shutters of the Patent sails were lost, with some of them being found 2 km away. The mill was not repaired, and was used by the local fire brigade for training exercises.

In 1976, the mill was sold to the Gemeente Doetinchem. The mill was restored in 1980. Its name was changed from Velsmolen to Benninkmolen, after its first owner, J F Bennink. On restoration, the Patent sails were replaced by Common sails. Benninkmolen is listed as a Rijksmonument, № 13087.


 * It is listed as a Rijksmonument, № xxxx.
 * It is listed as a Rijksmonument, № xxxx.
 * It is listed as a Rijksmonument, № xxxx.
 * It is listed as a Rijksmonument, № xxxx.
 * It is listed as a Rijksmonument, № xxxx.
 * It is listed as a Rijksmonument, № xxxx.

Description
The mill is what the Dutch describe as a "Standerdmolen". It is a post mill with a single storey octagonal roundhouse. The roof of the mill is covered in dakleer. The mill is winded by tailpole and winch. The sails are Common sails. They have a span of 22.50 m. The sails are carried on a cast iron windshaft, which was cast by Alsmulder of Utrecht. The windshaft also carries the wooden brake wheel which has teeth on the front and rear faces. The front face of the brake wheel has 65 teeth. It drives a pair of 1.60 m diameter Cullen millstones via a lantern pinion stone nut which has 12 staves. The rear face of the brake wheel has 59 teeth. It drives a pair of 1.50 m French Burr millstones via a lantern pinion stone nut which has 11 staves. With this arrangement, the millstones are driven in opposite directions.

Benninkmolen is what the Dutch call a "Stellingmolen". It is a two storey smock mill on a single store base. There is a stage, which is 3.020 m above ground level. The smock and cap are covered in shingles. Winding is by tailpole and winch. The sails are Common sails. They have a span of 23.10 m. They are carried on a cast iron windshaft. The windshaft also carries the brake wheel, which has 51 cogs. This drives a wallower with 28 cogs, which is situated at the top of the upright shaft. At the bottom of the upright shaft is the great spur wheel, which has 80 cogs. This drives two pairs of 1.40 m diameter French Burr millstones via lantern pinion stone nuts with 24 staves each.

Millers


References for above:-

Public access
Benninkmolen is open on Tuesday and Saturday from 09:00 to 12:00 and Friday from 11:00 to 16:00. It is also open at other times if a banner is flying, or by appointment.

History
The mill was originally built at Wormer, North Holland, Netherlands. During WWI, it was moved to Langweer, Friesland. It was dismantled in 1960 and re-erected at the Netherlands Open Air Museum, Arnhem, Gelderland in 1989. The mill was severely damaged in a snowstorm in 2000. It was restored in 2003.

..
 * ƒ4,130.38. The mill is listed as a Rijksmonument, №39517.

Description
The mill is what the Dutch describe as a Weidemolen (Meadow mill). It is a small hollow post mill on a roundhouse. The mill is winded by tail vane. The buck and roundhouse are covered in boards. The sails are Common sails. They have a span of 3.85 m. The sails are carried on a wooden windshaft. The windshaft carries the brake wheel which has 21 cogs. This drives the wallower (9 cogs) at the top of the upright shaft. At the bottom of the upright shaft a centrifugal pump is driven. .

Operators
References for above:-

Public access
The mill can be viewed externally during museum opening hours.

.