User:Ntmy777/Solid-state chemistry

Solid-state chemistry, also sometimes referred as materials chemistry, is the study of the synthesis, structure, properties of solid phase materials. It therefore has a strong overlap with solid-state physics, mineralogy, crystallography, ceramics, metallurgy, thermodynamics, materials science and electronics with a focus on the synthesis of novel materials and their characterization. A diverse range of synthetic techniques, such as the ceramic method and chemical vapour depostion, make solid-state materials. Solids can be classified as crystalline or amorphous on basis of the nature of order present in the arrangement of their constituent particles. Their elemental compositions, microstructures, and physcial properties can be characterized through a variety of analytical methods.

Synthetic methods
Given the diversity of solid-state compounds, an equally diverse array of methods are used for their preparation. Synthesis can range from high-temperature methods, like the ceramic method, to gas methods, like chemical vapour deposition. Often, the methods prevent defect formation or produce high-purity products.

Ceramic method
The ceramic method is one of the most common synthesis techniques. The synthesis occurs entirely in the solid state. The reactants are ground together, formed into a pellet, and heated at high temperatures in an oven. After the precursors are reacted at a high temperature, the oven temperature must be gradually lowered to prevent defects and form a well-ordered crystal.

Using a mortar and pestle or ball mill, the reactants are ground together, which decreases size and increases surface area of the reactants. If the mixing is not sufficient, we can use techniques such as co-precipitation and sol-gel. A chemist forms pellets from the ground reactants and places the pellets into containers for heating. The choice of container depends on the precursors, the reaction temperature and the expected product. For example, metal oxides are typically synthesized in silica or alumina containers. A tube furnace heats the pellet. Tube furnaces are available up to maximum temperatures of 2800oC.

Melt methods
In the case of synthesizing glass ceramics, the synthetic technique involves melting together and then annealing the solidified melt. The annealing temperature allows formation of crystalline structures within the glass. When using volatile reactants, the reactants are put in an ampoule that is kept in liquid nitrogen. An oven heats the sealed ampoule. The solid can have abnormal grain growth (AGG), which may or may not be desirable.

Intercalation method
Intercalation synthesis is the insertion of molecules or ions between layers of a solid. The layered solid has weak intermolecular bonds holding its layers together. The process occurs via diffusion. Intercalation is further driven by ion exchange, acid-base reactions or electrochemical reactions. The intercalation method was first used in China with the discovery of porcelain. Also, graphene is produced by the intercalation method, and this method is the principle behind lithium-ion batteries.

Solution methods
It is possible to use solvents to prepare solids by precipitation or by evaporation. At times, the solvent is a hydrothermal that is under pressure at temperatures higher than the normal boiling point. A variation on this theme is the use of flux methods, which use a salt with a relatively low melting point as the solvent.

Gas methods
Many solids react vigorously with gas species like chlorine, iodine, and oxygen. Other solids form adducts, such as CO or ethylene. Such reactions are conducted in open-ended tubes, which the gasses are passed through. Also, these reactions can take place inside a measuring device such as a TGA. In that case, stoichiometric information can be obtained during the reaction, which helps identify the products.

Chemical vapour transport
Chemical vapour transport results in very pure materials. The reaction typically occurs in a sealed ampoule. A transporting agent, added to the sealed ampoule, produces a volatile intermediate species from the solid reactant. For metal oxides, the transporting agent is usually Cl2 or HCl. The ampoule has a temperature gradient, and, as the gaseous reactant travels along the gradient, it eventually deposits as a crystal. An example of an industrially-used chemical vapor transport reaction is the Mond process. The Mond process involves heating impure nickel in a stream of carbon monoxide to produce pure nickel.

Chemical vapour deposition
Chemical vapour deposition is a method widely used for the preparation of coatings and semiconductors from molecular precursors. A carrier gas transports the gaseous precursors to the material for coating.

Characterization
This is the process in which a material’s chemical composition, structure, and physical properties are determined using a variety of analytical techniques.

New phases
Synthetic methodology and characterization often go hand in hand in the sense that not one but a series of reaction mixtures are prepared and subjected to heat treatment. Stoichiometry, a numerical relationship between the quantities of reactant and product, is typically varied systematically. It is important to find which stoichiometries will lead to new solid compounds or solid solutions between known ones. A prime method to characterize the reaction products is powder diffraction because many solid-state reactions will produce polycrystalline molds or powders. Powder diffraction aids in the identification of known phases in the mixture. If a pattern is found that is not known in the diffraction data libraries, an attempt can be made to index the pattern. The characterization of a material's properties is typically easier for a product with crystalline structures.

Compositions and structures
Once the unit cell of a new phase is known, the next step is to establish the stoichiometry of the phase. This can be done in several ways. Sometimes the composition of the original mixture will give a clue, under the circumstances that only a product with a single powder pattern is found or a phase of a certain composition is made by analogy to known material, but this is rare.

Often, considerable effort in refining the synthetic procedures is required to obtain a pure sample of the new material. If it is possible to separate the product from the rest of the reaction mixture, elemental analysis methods such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM) can be used. The detection of scattered and transmitted electrons from the surface of the sample provides information about the surface topography and composition of the material. Energy dispersive X-ray spectroscopy (EDX) is a technique that uses electron beam excitation. Exciting the inner shell of an atom with incident electrons emits characteristic X-rays with specific energy to each element. The peak energy can identify the chemical composition of a sample, including the distribution and concentration.



Similar to EDX, X-ray diffraction analysis (XRD) involves the generation of characteristic X-rays upon interaction with the sample. The intensity of diffracted rays scattered at different angles is used to analyze the physical properties of a material such as phase composition and crystallographic structure. These techniques can also be coupled to achieve a better effect. For example, SEM is a useful complement to EDX due to its focused electron beam, it produces a high-magnification image that provides information on the surface topography. Once the area of interest has been identified, EDX can be used to determine the elements present in that specific spot. Selected area electron diffraction can be coupled with TEM or SEM to investigate the level of crystallinity and the lattice parameters of a sample.

And more
XRD is also used due to its imaging capabilities and speed of data generation. It often requires revisiting and refining the preparative procedures and is dependent on the stability of phases at a certain composition and stoichiometry. In other words, what the phase diagram looks like. Thermal analysis techniques like DSC or DTA help to establish this knowledge and temperature-dependent powder diffraction can also be used due to the advent of synchrotrons. Increased knowledge of phase relations often leads to further refinement in synthetic procedures in an iterative way. New phases are thus characterized by their melting points and their stoichiometric domains. The latter is important for the many solids that are non-stoichiometric compounds. The cell parameters obtained from XRD are particularly helpful to characterize the homogeneity ranges of the latter.

Local structure
In contrast to the large structures of crystals, the local structure describes the interaction of the nearest neighbouring atoms. Methods of nuclear spectroscopy use specific nuclei to probe the electric and magnetic fields around the nucleus. E.g. electric field gradients are very sensitive to small changes caused by lattice expansion or compression (thermal or pressure), phase changes, or local defects. Common methods are Mössbauer spectroscopy and perturbed angular correlation.

Optical properties
For metallic materials, their optical properties arise from the collective excitation of conduction electrons. The coherent oscillations of electrons under electromagnetic radiation along with associated oscillations of the electromagnetic field are called surface plasmon resonances. The excitation wavelength and frequency of the plasmon resonances provide information on the particle's size, shape, composition, and local optical environment.

For non-metallic materials or semiconductors, they can be characterized by their band structure. It contains a band gap that represents the minimum energy difference between the top of the valence band and the bottom of the conduction band. The band gap can be determined using Ultraviolet-visible spectroscopy to predict the photochemical properties of the semiconductors.

Further characterization
In many cases, new solid compounds are further characterized by a variety of techniques that straddle the fine line that separates solid-state chemistry from solid-state physics. See Characterisation in material science for additional information.