User:Rcp.kasegav/sandbox

STANDARD OPERATING PROCEDURE Objective: To lay down the procedure for Operation and Calibration of Tablet disintegration tester. Responsibility: Quality Control Supervisor. Procedure: 1. Ensure the cleanliness of the area and the instrument. 2. Ensure that clean purified water is filled in the beakers till the desired level. 3. Switch 'ON' the Main supply & the instrument 'On/Off' switch on the rear side. 4. Switch 'ON' the heater by pressing 'Temp' key. 5. Press 'Set' & 'Temp.' key to set the temperature to 37°C. 6. Press 'Set' & Timer' key to set the desired test time. 7. Place one tablet/ capsules to be tested in each of the six cylinders of basket rack    assembly. 8. Place the disks if mentioned in the monograph. 9. Press Start/Stop' key once to start the test. 10. Watch the complete disintegration of the tablet/ capsule and note down the time. 11Press Start/Stop' key to stop the test.