User:Regi1988

How to port forward UTSTARCOM UT300R2U modem?
Just copy the below configuration file in the notepad and just save it as config.conf

                <dmzHost ipAddr="192.168.1.136"/> </SecCfg> <Lan> <entry9999 address="1.1.1.1" mask="255.255.255.0" dhcpServer="disable" confDhcpSrv="disable" leasedTime="0" startAddr="0.0.0.0" endAddr="0.0.0.0" subnetMask="0.0.0.0" instanceId="1509949458"/> <entry1 address="192.168.1.1" mask="255.255.255.0" dhcpServer="enable" confDhcpSrv="enable" leasedTime="24" startAddr="192.168.1.2" endAddr="192.168.1.254" subnetMask="255.255.255.0" instanceId="1509949442"/> </Lan> <AtmCfgVcc> <vccId9999 vpi="0" vci="65534" tdId="0" aalType="AAL2" adminStatus="down" encap="unknown" qos="disable" instanceId="1509949456"/> <vccId2 vpi="0" vci="32" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949451"/> <vccId3 vpi="8" vci="35" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949452"/> <vccId4 vpi="8" vci="81" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949453"/> <vccId5 vpi="0" vci="100" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949454"/> <vccId6 vpi="14" vci="34" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949455"/> <vccId7 vpi="1" vci="41" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949456"/> <vccId1 vpi="0" vci="35" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable" instanceId="1509949450"/> </AtmCfgVcc> <wan_0_32> <entry1 vccId="2" vlanMuxId="-1" conId="1" name="br_0_32" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949453"/> </wan_0_32> <wan_8_35> <entry1 vccId="3" vlanMuxId="-1" conId="1" name="br_8_35" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949454"/> </wan_8_35> <wan_8_81> <entry1 vccId="4" vlanMuxId="-1" conId="1" name="br_8_81" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949455"/> </wan_8_81> <wan_0_100> <entry1 vccId="5" vlanMuxId="-1" conId="1" name="br_0_100" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949456"/> </wan_0_100> <wan_14_34> <entry1 vccId="6" vlanMuxId="-1" conId="1" name="br_14_34" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949457"/> </wan_14_34> <wan_1_41> <entry1 vccId="7" vlanMuxId="-1" conId="1" name="br_1_41" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949458"/> </wan_1_41> <pppsrv_0_35> <ppp_conId1 userName="USERNAME" password="PASSWORD" serviceName="dataone" idleTimeout="0" ipExt="disable" auth="auto" useStaticIpAddr="0" localIpAddr="255.255.255.255" Debug="disable" pppAuthErrorRetry="disable" pppToBridge="enable" /> </pppsrv_0_35> <wan_0_35> <entry1 vccId="1" vlanMuxId="-1" conId="1" name="pppoe_0_35_1" protocol="PPPOE" encap="LLC" firewall="enable" nat="enable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949452"/> </wan_0_35> <ADSL/> <RouteCfg> </RouteCfg> <SNTPCfg/> <EngDbgCfg/> <pppsrv_0_32/> <pppsrv_8_35/> <pppsrv_8_81/> <pppsrv_0_100/> <pppsrv_14_34/> <pppsrv_1_41/>

Edit your configuration file
Then search for "USERNAME" and "PASSWORD" in the config.conf file and replace it with your broadband username and password and save the configuration file.

Configure your modem as given below
open browser

type 192.168.1.1

give admin as username and password

then select management

then update software

browse and give the location of the configuration file and click update software

then finally save and reboot the modem

thats it you are done!!!!!!!! Your port will automatically get forwarded...