User:Samharrison15/Skurfing (sport)

= Skurfing (sport) = From Wikipedia, the free encyclopedia Jump to navigationJump to search

Definition
Skurfing is a towed water sport similar to waterskiing, in that an individual is pulled behind a boat on a tow rope. However, instead of water skis, the sport uses a skurfboard-a floating platform the user balances on-similar to a surfboard, but typically much shorter, with two foot-straps to prevent falling off the board and three fins positioned on the bottom that make it easier to maneuver when the board is being towed. The word itself is a portmanteau of skiing and surfing. Skurfing is often considered to be the precursor to wakeboarding.

Contents

 * 1Water skurfing
 * 1.1Styles
 * 2Street skurfing
 * 2.1Styles
 * 3See also
 * 4References
 * 5External links

Origins[edit]
A person skurfing Skurfing was inspired by an unknown man being pulled by a boat on a surfboard in Lake Havasu, Arizona. Skurfing is a form of water skiing that uses a surfboard or similar board instead of skis. The skurfer is towed behind a motorboat at planing speed with a tow rope similar to that of knee boarding and wakeboarding. It shares an advantage with kneeboarding in that the motorboat does not require as much speed as it does for water skiing.

The skurfboard is a surfboard that is usually shorter by about two feet, wider and has three larger fins that make the board easier to maneuver while being pulled behind a boat. The planing speed of the motorboat is equivalent to the speed generated by a wave and allows the skurfer to ride behind the boat the same way a surfer would ride a wave. One of the advantages of skurfing, when compared with surfing, is that when the water is flat, skurfing is still possible. Skurfing can be done behind a boat, on a jet ski, river or in an ocean.

Freeriding is when the wake is surfed without the rope. First, the rider pulls themselves up the rope so that they are skurfing in the largest part of the wake. The rider then gently pumps the board to maintain speed and moves their weight further forward to help them stay on the wake wave. Once they are being propelled by the wake the rope is thrown back into the boat.

Skurfing has developed into its own unique sport but has also been used in adapting other sports such as surfing. Before skurfing was invented there were limitations to paddling onto larger waves when surfing because surfers lacked the speed needed to stay in front of the wave. Skurfing has shown the world the potential of big wave surfing by towing the surfer towards big waves. Therefore, giving the surfer the speed needed to catch the wave successfully.

The early usage was a portmanteau of skiing (as in water skiing) and surfing, and was used to describe a popular surface water sport in which the participant is towed on a surfboard behind a boat with a ski rope.

In 1985, California surfer Tony Finn invented the Skurfer, a shorter, narrow version of a surfboard with foot straps.

Although the "Skurfer" was originally trademarked by Tony Finn, the word skurfing was potentially first coined in New Zealand by surfboard shaper Allan Byrne. Allan Byrne lent a surfboard to Jeff Darby and friends in Queensland Australia who started to make their own and later came in contact with Tony Finn who was to later produce the brand 'Skurfer' under royalty.

Many years prior[when?] to Tony Finn and the 'Skurfer', Australian surfboard shaper and inventor Bruce McKee along with associate Mitchell Ross, launched the world's first mass-produced plastic roto-molded construction skurfboard named the "Mcski", later renamed "SSS" skiboard and then 'Wake-snake' in Australia. The board had adjustable rubber foot straps, concave tunnel bottom and a keel fin. Two smaller side fins were later added for greater hold and more maneuverability.

Bruce McKee and associate Mitchell Ross negotiated with USA's Medalist Waterskis and the first American production was launched. The launch of the product's American version being named the 'Surf-Ski' was in 1984 at Chicagos 'IMTEC' show. At the show McKee also met Tony Finn who was the proposed Californian representative. Tony Finn, went on to do his own negotiations with Darby and company from Australia and the result as mentioned above were the US boards later launched under the 'Skurfer' brand name.

Surfing is highly popular in the state of Western Australia and in many other places in the world. Unlike most other water sports where the participant is towed, water skurfing is not a professional sport and has no official competitions. It is a freestyle sport with highly individualistic style and form. There are no defined styles or conventions, rather it is about personal style.

The first Skurfer championships were televised on ESPN in 1990.

Water skurfing is considered by many[who?] to be a precursor to wakeboarding, as the skurfboards evolved in the late 1980s into compression-molded products ( a.k.a. "skiboards") then eventually into the twin-tipped wakeboard.

Styles[edit]
There are two main styles of water skurfing, the noseriding style, mostly used by people who surf on a longboard. The alternative is with cutbacks, carves and other turns. Some skurfers even get air over the wake.

A new style of water skurfing has recently emerged in the sport where the fins are removed from the bottom of the board. This finless style requires more balance and finesse than having the fins attached. Not having fins limits cutbacks and carving, but allows the rider to spin the board around in a 360-degree rotation.

The maneuvers on a skurfboard are similar to those on a surfboard. These maneuvers include:


 * Cut-backs
 * 180° rotations
 * 360° rotations
 * Serial jumps
 * Power slides
 * Freeriding

See also[edit]

 * Aquaplaning (sport)

References[edit]

 * 1) ^
 * 2) ^
 * 3) ^ Jump up to:a b

External links[edit]

 * Scurfing - Everything you need to know[permanent dead link]
 * "A Brief History Of Wakeboarding: Slim Beginnings" wakereactor.com
 * Palco, Janos "Wakesurfing: New inland water sport on the rise" January 3, 2014, Adventure Sports Network