User:SurfaceChem446/outline

Protein Adsorption

Adsorption (not to be mistaken for absorption) is the accumulation and adhesion of molecules, atoms, ions, or larger particles to a surface, but without actually penetrating the surface. The adsorption of larger biomolecules such a proteins is of high physiological relevance, and adsorb with different mechanisms than their molecular or atomic analogs. Some of the major driving forces behind protein adsorption include: surface energy, intermolecular forces, hydrophobicity, and ionic or electrostatic interaction. By knowing how these factors affect protein adsorption, they can then be manipulated by machining, alloying, and other engineering techniques to select for the most optimal performance in biomedical or physiological applications.

Relevance
Many medical devices and products come into contact with the internal surfaces of the body, such as surgical tools and implants. When a non-native material enters the body, the first step of the immune response takes place and host extracellular matrix and plasma proteins aggregate to the material in attempts to contain, neutralize, or wall-off the injurious agent. These proteins can facilitate the attachment of various cell types such as osteoblasts and fibroblasts that can encourage tissue repair. Taking this a step further, implantable devices can be coated with a bioactive material to encourage adsorption of specific proteins, fibrous capsule formation, and wound healing. This would reduce the risk of implant rejection and accelerate recovery by selecting for the necessary proteins and cells necessary for endothelialization. After the formation of the endothelium, the body will no longer be exposed to the foreign material, and will stop the immune response.

Proteins such as collagen or fibrin often serve as scaffolds for cell adhesion and cell growth. This is an integral part to the structural integrity of cell sheets and their differentiation into more complex tissue and organ structures. The adhesion properties of proteins to non-biological surfaces greatly influences whether or not cells can indirectly attach to them via scaffolds. An implant like a hip-stem replacement necessitates integration with the host tissues, and protein adsorption facilitates this integration.

Surgical tools can be designed to be sterilized more easily so that proteins do not remain adsorbed to a surface, risking cross-contamination. Some diseases such as Creutzfeldt–Jakob disease and kuru (both related to mad cow disease) are caused by the transmission of prions, which are errant or improperly folded forms of a normally native protein. Surgical tools contaminated with prions require a special method of sterilization to completely eradicate all trace elements of the misfolded protein, as they are resistant to many of the normally used cleansing methods.

However, in some cases, protein adsorption to biomaterials can be an extremely unfavorable event. The adhesion of clotting factors may induce thrombosis, which may lead to stroke or other blockages. Some devices are intended to interact with the internal body environment such as sensors or drug-delivery vehicles, and protein adsorption would hinder their effectiveness.

Fundamentals of Protein Adsorption
Proteins are small biomolecules that can be comprised of amino acid subunits. Each amino acid has a side chain that gains or loses charge depending on the pH of the surrounding environment, as well as its own individual polar/nonpolar qualities. Charged regions can greatly contribute to how that protein interacts with other molecules and surfaces, as well as its own tertiary structure (protein folding). As a result of their hydrophilicity, charged amino acids tend to be located on the outside of proteins, where they are able to interact with surfaces. It is the unique combination of amino acids that gives a protein its properties. In terms of surface chemistry, protein adsorption is a critical phenomenon that describes the aggregation of these molecules on the exterior of a material. The tendency for proteins to remain attached to a surface depends largely on the material properties such as surface energy, texture, and relative charge distribution. Larger proteins are more likely to adsorb and remain attached to a surface due to the higher number of contact sites between amino acids and the surface (Figure 1).

Energy of Protein Adsorption
The fundamental idea behind spontaneous protein adsorption is that adsorption occurs when more energy is released than gained according to Gibbs law of free energy.

This is seen in the equation:


 * $$\Delta_{ads} G = \Delta_{ads} H - {T} \Delta_{ads} S < 0 $$

where:
 * ∆ads is net change of the parameters
 * G is Gibbs free energy
 * T is the temperature (SI unit: kelvin)
 * S is the entropy (SI unit: joule per kelvin)
 * H is the enthalpy (SI unit: joule)

In order for the protein adsorption to occur spontaneously, ∆adsG must be a negative number.

Vroman Effect
Proteins and other molecules are constantly in competition with one another over binding sites an a surface. The Vroman Effect theory postulates that small and abundant molecules will be the first to coat a surface. However, over time, molecules with higher affinity for that particular surface will replace them.

Forces and Interactions
The four fundamental classes of forces and interaction in protein adsorption are: 1) ionic or electrostatic interaction, 2) hydrogen bonding, 3) hydrophobic interaction (largely entropically drive), and 4) intereactions of charge-transfer or partical electron donor/acceptor type..

Ionic or Electrostatic Interactions
The charge of proteins is determined by the pH of its amino acid side chains, and the terminal amino acid and carboxylic acid. Groups with pHs above physiologic con ditions have a positive charge and groups with pH below have a negative charge. The net charge of the protein, determined by the sum charge it's constituents, results in electrophoretic migration in a physiologic electric field. These effects are short-range because of the high di-electric constant of water, however, once the protein is close to a charged surface, electrostatic coupling becomes the dominant force.

Hydrogen Bonding
Water has as much propensity to form hydrogen bonds as any group in a polypeptide. During a folding and association process, peptide and amino acid groups exchange hydrogen bonds with water. Thus, hydrogen bonding does not have a strong stabilizing effect on protein adsorption in an aqueous medium.

Hydrophobic Interactions
Hydrophobic interactions are essentially entropic interactions basically due to order/disorder phenomena in an aqueous medium. The free energy associated with minimizing interfacial areas is responsible for minimizing the surface area of water droplets and air bubbles in water. This same principle is the reason that hydrophobic amino acid side chains are oriented away from water, minimizing their interaction with water. The hydrophilic groups on the outside of the molecule result in protein water solubility. Characterizing this phenomena can be done by treating these hydrophobic relationships with interfacial free energy concepts. Accordingly, one can think of the driving force of these interactions as the minimization of total interfacial free energy, ie minimization of surface area.

Charge-Transfer Interactions
Charge-transfer interactions are also important in protein stabilization and surface interaction. In general donor-acceptor processes, one can think of excess electron density being present which can be donated to an electrophilic species. In aqueous media, these solute interactions are primarily due to pi orbital electron effects.

Rate of Adsorption
In order for proteins to adsorb, they must first come into contact with the surface through one or more of these major transport mechanisms: diffusion, thermal convection, bulk flow, or a combination thereof. When considering the transport of proteins, it is clear how concentration gradients, temperature, protein size and flow velocity will influence the arrival of proteins to a solid surface. Under conditions of low flow and minimal temperature gradients, the adsorption rate can be modeled after the diffusion rate equation.

Diffusion Rate equation:

 * $$ {dn \over dt} = C_o({D \over \pi t})^{1/2} $$

where:
 * D is the diffusion coefficient
 * n is the surface concentration of protein
 * Co is the bulk concentration of proteins
 * t is time

A higher bulk concentration and/or higher diffusion coefficient (inversely proportional to molecular size) results in a larger number of molecules arriving at the surface. The consequential protein surface interactions result in high local concentrations of adsorbed protein, reaching concentrations of up to 1000 times higher than in the bulk solution. However, the body is much more complex, containing flow and convective diffusion, and these must be considered in the rate of protein adsorption.

Flow in a thin channel:

 * $$ {\partial C \over \partial t} + V(y){\partial C \over \partial x} = D{\partial^2 C \over \partial y^2} $$

and
 * $$ {V(y) = \gamma y(1- {y \over b})} $$

where:
 * C is concentration
 * D is the diffusion coefficient
 * V is the velocity of flow
 * x is the distance down the channel
 * γ is the wall shear rate
 * b is the height of the channel

This equation is especially applicable to analyzing protein adsorption to biomedical devices in arteries, e.g. stents.

Chemical composition
Metallic bonding refers to the specific bonding between positive metal ions and surrounding valence electron clouds. This intermolecular force is relatively strong, and gives rise to the repeated crystalline orientation of atoms, also referred to as its lattice system. There are several types of common lattice formations, and each has its own unique packing density and atomic closeness. The negatively charged electron clouds of the metal ions will sterically hinder the adhesion of negatively charged protein regions due to charge repulsion, thus limiting the available binding sites of a protein to a metal surface.

The lattice formation can lead to connection with exposed potential metal-ion-dependent adhesion sites (MIDAS) which are binding sites for collagen and other proteins. The surface of the metal has different properties than the bulk since the normal crystalline repeating subunits is terminated at the surface. This leaves the surface atoms without a neighboring atom on one side, which inherently alters the electron distribution. This phenomenon also explains why the surface atoms have a higher energy than the bulk, often simply referred to as surface energy. This state of higher energy is unfavorable, and the surface atoms will try to reduce it by binding to available reactive molecules. This is often accomplished by protein adsorption, where the surface atoms are reduced to a more advantageous energy state.

The internal environment of the body is often modeled to be an aqueous environment at 37°C at pH 7.3 with plenty of dissolved oxygen, electrolytes, proteins, and cells. When exposed to oxygen for an extended period of time, many metals may become oxidized and increase their surface oxidation state by losing electrons. This new cationic state leaves the surface with a net positive charge, and a higher affinity for negatively charged protein side groups. Within the vast diversity of metals and metal alloys, many are susceptible to corrosion when implanted in the body. Elements that are more electronegative are corroded faster when exposed to an electrolyte-rich aqueous environment such as the human body. Both oxidation and corrosion will lower the free energy, thus affecting protein adsorption as seen in Eq. 1.

Effects of Machining
Surface roughness and texture has an undeniable influence on protein adsorption on all materials, but with the ubiquity of metal machining processes, it is useful to address how these impact protein behavior. The initial adsorption is important, as well as maintained adhesion and integrity. Research has shown that surface roughness can encourage the adhesion of scaffold proteins and osteoblasts, and results in an increase in surface mineralization. Surfaces with more topographical features and roughness will have more exposed surface area for proteins to interact with. In terms of biomedical engineering applications, micromachining techniques are often used to increase protein adhesion to implants in the hopes of shortening recovery time. The technique of laserpatterning introduces grooves and surface roughness that will influence adhesion, migration and alignment. Grit-blasting, a method analogous to sand blasting, and chemical etching have proven to be successful surface roughening techniques that promote the long-term stability of titanium implants. The increase in stability is a direct result of the observed increase in extracellular matrix and collagen attachment, which results in increased osteoblast attachment and mineralization when compared to non-roughened surfaces.

Protein Adsorption to Polymers
Polymers are of great importance when considering protein adsorption in the biomedical arena. By careful selection of the polymer's mer and manufacturing process, the chemical and physical properties of polymers can be highly tailored to the specific design criteria of a particular application.

Chemical composition
Polymers are constituted of mers bound together repeatedly. Typically, polymers are formed by directional covalent bonds. As the chain grows by the addition of mers, the chemical and physical properties of the material are dictated by the molecular structure of the monomer.

Conformation Effects
Protein adsorption often results in significant conformational changes, which refers to changes in the secondary, tertiary, and quaternary structures of proteins. In addition to adsorption rates and amounts, orientation and conformation are of critical importance. These conformational changes can affect protein interaction with ligands, substrates, and antigens which are dependend on the orientation of the binding site of interest. These conformational changes, as a result of protein adsorption, can also denature the protein and change its native properties.

Polymer Scaffolds
Tissue Engineering is a relatively new field that utilizes a scaffolding as a platform upon which the desired cells proliferate. It is not clear what defines an ideal scaffold for a specific tissue type. The considerations are complex and protein adsorption only adds to the complexity. Although architecture, structural mechanics, and surface properties play a key role, understanding degredation and rate of protein adsorption are also key. In addition to the essentials of mechanics and geometry, a suitable scaffold construct will possess surface properties that are optimized for the attachment and migration of the cell types of particular interest.

Generally, it has been found that scaffolds that closely resemble the natural environments of the tissue being engineered are the most successful. As a result, a lot of research has gone into investigating natural polymers that can be taylored, through processing methodology, toward a specific design criteria. Chitosan is currently one of the most widely used polymers as it is very similar to naturally occuring glycosaminoglycan (GAGs) and it is degradable by human enzymes.

Chitosan
Chitosan is a linear polysaccharide containing linked chitin-derived residues. Chitosan is cationic and thus electrostatically reacts with proteoglycans, anionic GAGs, and other molecules possessing a negative charge. Since many cytokines and growth factors are linked to GAG, scaffolds with the chitosan-GAG complexes are able to retain these proteins secreted by the adhered cells. Another quality of chitosan that gives it good biomaterial potential is its high charge density in solutions. This allows chitosan to form ionic complexes with many water-soluble anionic polymers and expand its range of applications.

 