User:Tmavi2/sandbox

THROTTLE POSITION SENSOR SYSTEM

INSPECTION STEPS

If the throttle position sensor is not operating, follow the following steps:

STEP 1: Check the entire ignition system for connection.

If it is not good, repair or replace the throttle position sensor. If it is good move to step2.

Step 2: Check the throttle position sensor.

If the coil of the throttle position sensor is not healthy, replace the throttle position sensor. If it is healthy, continue with step 3.

Step 3: Check the CDI magneto, charging coil, if it is not good replace. If the CDI magneto charging coil is good, continue with step 4.

Step 4: Check CDI unit, throttle position sensor input voltage and if it is not good replace.

Kindly note that a "pocket tester: YU-3112-C/90890-03112" must be used, in order to successfully perform this inspection