User:Tranxzzano

This simple prototype( www.megazzano.com ) is made of second hand things that can be got. While, another tools such as chopping knife, knife, cutter, chisel (wide = 1 up 2 cm.) as former, sandpaper as smoother, pylox / paint as color. The material is hardwood teak, part of ballpoint, plastic, and etc.

A. BODY MAKING.

A.1. UP BODY Made of hardwood teak with long = 38 cm; wide = 6 cm; and tall = 3.8 cm.

A.2. DOWN BODY

Made of hardwood teak with long = 38 cm; wide = 6 cm; and tall = 3.8 cm.

B. MAKING OF ROTOR AND PROPELLER.

Propeller made from plastic (it can from food container, detergents container, toys) and stand on that wood material. While, rotor made from ballpoint container ink, and function as connecting motor / dynamo to propeller.

B.1. FORWARD AND BACK PROPELLER

To making the forward and back propeller, cut the plastic with oval flat form. While, it stand on place that made of wood with long = 2 cm, wide = 1 cm, and perimeter = 3 cm (for base). B.2. UP DOWN PROPELLER

To making the up-down propeller, cut the plastic to wide flat form with shortly. The standing on place made of cylinder wood.

B.3. DIRECTOR AND DIVERTER PROPELLER

By cutting the plastic and it is connected with other directly. Standing on place use screw and it is connected with rotor directly.

C. COMPONENT PLACE.

D. REMOTE SCEMA.

E. THE LEVEL OF REMOTE USAGE.

G. REMOTE BOX

We can to put the component such as accu, electronic circuit control on it and the box of remote is combination of plywood.