User:Upendra Saroj/sandbox

Merchandising: It is a vital process that involves planning, developing, executing and dispatching the order (product) to the buyer. The merchandising process comprises guiding and supervising for the successful processing of an order. The types of merchandising done in a garment unit are marketing merchandising and product merchandising.

The main objective of marketing merchandising is development of product, costing and ordering, and it has direct contact with the buyer. Product merchandising is carried out in the respective apparel unit and involves all the responsibilities starting from sourcing to finishing.

Sampling department: The sampling department coordinates with the merchandising and production department. It is carried out to foresee finished product appearance and fit when produced in bulk and to confirm whether there are any inconsistencies in the pattern according to the buyer’s specification. It also aids to determine the fabric consumption along with that of thread and other accessories used.

Fabric sourcing: Fabric sourcing is mainly engaged in deciding where and how the fabrics have to be procured. It works in conjunction with the merchandising department and looks after the delivery of the required garments within the scheduled time and cost.

Purchasing department: The main difference between the sourcing and purchasing department is that the sourcing section works for sourcing the fabrics alone whereas the nature of the work of the purchasing department comprises sourcing of accessories and trims as well.

Fabric inspection department: The main aims of fabric inspection team are

Identification and analysis of fabric defects using various standard methods.

Selection of fabric according to AQL (accepted quality level)1.5.

Accessory stores department: The receipt of the raw materials or the accessories is normally completed in terms of documents that are received from the merchants.

Production planning department: Upon receipt of the orders from the merchants, preproduction meetings with the departments have to be done. After that, the production department will assign the style to the specific line that has the capacity to complete it on time. The planning section then carries out the estimation and planning of order quantity, plan cut date (PCD), breakup of order, operation breakdown, etc. based on the particular unit.

Laboratory department: The laboratory or testing centre in the industry should be equipped with all the essential instruments that are mandatory for the testing of fabric and accessories. If the facility for specific tests mentioned by the buyer is not available in the industry, it should be sent to external laboratories that are authorised by the buyers.

Machine maintenance: Undesirable quality of garments mostly results from ill-maintained machines. Breakdown and preventive maintenance is mainly aimed toward reducing the downtime and increasing lifetime, respectively.

CAD section: Normally, large-scale garment industries have their own designing department for various garment styles. The CAD department is accountable for the following functions:

Determining cutting average for costing

Making the most efficient cutting marker

Development and alteration of patterns

Development of size set pattern by grading

Digitising the pattern

Cutting section: The cutting department normally receives the order from the production manager who has approved the cutting order to cut a given quantity of garment styles. The cutting order sheet contains the following information:

Sampling average, garment weight and averages of other trims

Measurement sheet

Design of the garment

Purchase order

Fabric request sheet

Marker planning – length of lay, etc., size ratio and colours in which the patterns are to be cut

Production department: The production department will obtain the details like

The garment style

Number of operators required

The batch for which the style has to be installed

Target for each day

Breakup of the production quantity

After receipt of all of the above details, the production department sends a request from the cutting section for the cut parts. After assembling of the components, a line check has to be done where the shade matching and the measurements are checked.

Industrial engineering section: This department is comparatively new addition in apparel industry. It coordinates with several departments since this department provides the entire plan of the garment manufacturing and the thread and trims consumption criteria, operator’s skill level categorisation and other related aspects.

Embroidery department: It comes into play only when the particular garment style demands. It receives the garment panel, style and the embroidery details from the merchandisers and they will also get a sample of the garment on which the embroidery has been already done and it will be used as a reference sample.

Fabric washing section: After the completion of assembling and inspection process, the garments are sent to the washing department for the washing or finishing that is required for the particular style according to the specification sheet.

Quality assurance department: To maintain and control the quality, the quality assurance department divides the work into different stages of manufacturing, which are categorised into three major groups such as preproduction unit, cutting audit and sewing unit.

Finishing department: The finishing department is the last section in thegarment production prior to packing and dispatch and it plays a significant role in the final garment appearance. It involves the following processes.

Trimming: It removes the extra threads from the garment at the stitched areas.

Inspection: The inspection is done as per the AQL 2.5 system and mainly depends on the buyer requirements.

Pressing: This is carried out after the garment has been inspected completely and the garments are pressed or finished based on the method of their folding during packing.

Tagging section: After the completion of fabric inspection and pressing, they are sent for labelling, which includes the size labels, price tags and miscellaneous labels if any are mentioned in the specification sheet.

Packing: The packing is done in the carton boxes. Individual packing of garments in the poly bag and folding the garments and organizing them in the carton boxes without placing them in the poly bag are the two types of packing followed in the garment industry.

References:

Apparel Machinery and Equipments by R.Rathinamoorthy and R. Surjit

Carr and Latham's Technology of Clothing Manufacture, 4th Edition revised by David J. Tyler

Apparel Manufacturing Technology by T. Karthik, P. Ganesan, D. Gopalakrishnan

Garment Manufacturing Technology Edited by Rajkishore Nayak and Rajiv Padhye

The Apparel Industry by Richard M. Jones

Cooklin's Garment Technology for Fashion Designers 2nd Edition by Steve Hayes, John McLoughlin and Dorothy Fairclough