User:Venudxb/sandbox/Indian locomotive class AP

The AP series was a wide-gauge tender steam locomotive for passenger train service on the railways in British India, which was built around 1907. She is one of the BESA locomotives developed by the British Engineering Standards Committee, later called the British Engineering Standards Association (BESA). The abbreviation AP stands for Atlantic Passenger Locomotive, where Atlantic refers to the axle arrangement of the same name.

History
The AP series was the locomotive intended for express trains, which was first introduced in the second edition of the BESA standard from 1907. She could be equipped with three different large tenders - the small one held 3,000, the medium 4,000 and the large 4,500 gallons of water.

Vulcan delivered a series of 28 to the East Indian Railway (EIR), whose route network expanded from Calcutta towards the West. The elegant locomotives, built according to British designs, were used in front of express trains. On the railway they were numbered 1300 to 1327, the factory numbers were 2330–2357/1908.

Further locomotives were delivered in 1908 by the North British Locomotive Company.

Technical
The locomotive was a two-cylinder wet steam engine with a Belpaire boiler. The grate was arranged between the coupling gear sets. The two steam cylinders were located on the outside of the frame cheeks of the inner frame, and the Heusinger control was arranged between the wheels. The circulating plate was set low so that wheel protection boxes were arranged above the two coupling wheel sets. A small cow catcher was attached to the front buffer beam. The BESA standard suggested a completely enclosed cab, with the rear wall of the cab being formed by the tender. However, the locomotives built for the East Indian Railway had tenders without a rear wall of the cab. The tenders for 3000 and 4000 gallons of water were three-axle, the 4500 gallon tender was four-axle with two bogies. The two three-axle variants had running boards and handrails along the side walls, which made it possible to reach the train from the locomotive while it was moving. Another peculiarity of the design was the riser arranged in the middle of the dome axes. The series had the largest wheels of any steam locomotive used in India. They were almost two meters in diameter.

Similar series
Locomotive No. 992 of the EM series on display at the National Rail Museum of India in New Delhi has very similar main dimensions to the AP series locomotives. However, it was created by converting a 2'B locomotive from the E1 series of the Great Indian Peninsula Railway (GIPR), to which a trailing axle with an external frame was added. With a diameter of 6 ft 6 in, the driving wheels have the same dimensions as those of the AP series. The drive wheels, which are also very close together, are characteristic.

Weblinks

 * Factory photo of a machine built by the North British Locomotive Company