User:Yosemite2/sandbox

Helicommand HC3SX

Tail Gyro Tab Hints

SERVO TRAVEL LIMITATION LEFT and RIGHT Adjust for maximum possible travel without running into end blockings. check with the tail stick to either ends, in heading hold mode and maximum gyro gain (sensitivity). With a correctly adjusted neutral point, the travel limit settings here should be approximately equal for both sides. If during flight the tail responds unequal at both sides, the cause would probably be unequal travel limit, i.e. the travels from the neutral point differ on right and left side, or the neutral point is adjusted far off the needed neutral point. In general, the neutral point is not the real centre point of the tail rotor blades; rather it is directed against the main rotor’s torque.