User:Zameerwonder

Zameerwonder

PART – A

UNIT - 1

Foundry Metallurgy: Oxidation of liquid metals, gas dissolution in liquid metals, methods of degassing, fluidity, factors affecting fluidity, fluidity tests, hot tearing, shrinkage of liquid metals. 06 Hours

UNIT - 2

Casting Design: Introduction to casting design, redesign considerations, design for minimum casting stresses, design for directional solidification, design for metal flow, safety factors, design for low pattern cost and model making as an aid in design. 06 Hours

UNIT - 3

Solidification Of Castings: Crystallization and development of cast structure - nucleation, growth and dendritic growth. Structure of castings – significance and practical control of cast structure, grain shape and orientation, grain size, refinement and modification of cast structure. Concept of progressive and directional solidification, solidification time and derivation of Chvorinov’s equation, influence on mold characteristics and cast metal. 07 Hours

UNIT - 4

Risering And Gating: Need for risering, general considerations of risering, riser shapes, riser size, and location. Requirements of a riser. Sand, insulating, and exothermic materials used for risers. Riser feeding distance and theory of risering. Internal chills, external chills, use of mould materials of different chill capacities, padding for directional solidification. Open type and blind risers. Riser treatment using exothermic and insulating compounds. Gating system – theoretical consideration of gating, laws of fluid flow, turbulence in gating system, use of ceramic foam filters in gating, need for tapered sprue, gating ratio, simple problems. 07 Hours

PART – B

UNIT - 5

Special Moulding Techniques: Principles, materials used, process details and application of no-bake sand systems, vacuum moulding, flaskless moulding, and high pressure moulding. CUPOLA MELTING: Developments in cupola melting – hot blast cupola, water cooled cupola, balanced blast cupola, cokeless cupola, cupola charge calculations. 07 Hours

UNIT - 6

Ferrous Foundry: Melting procedures, casting characteristics, production, specification, and properties of some typical steels, grey cast iron, malleable iron, and spheroidal graphite cast iron castings. 07 Hours

UNIT - 7

Non-Ferrous Foundry: Melting procedures, casting characteristics, production, specification, and properties of some typical aluminum, copper, and magnesium based alloy castings. 06 Hours

UNIT - 8

Modernization And Mechanization Of Foundry: Need for modernization, and mechanization, moulding and core making, melting, pouring, shake out equipment and fettling, dust and fume control, material handling equipments for sand moulds and cores, molten metal and castings, reclamation of sands. Pollution control – norms, and agencies. 06 Hours