User talk:CodyHopping07

Project Turburban
Project Turburban is a project that I, CodyHopping07, have created. The idea is simple. You Find every model of Chevrolet Suburban from 1960 all the way to the 2007-2015 (GMT-900) suburban and swap in a Cummins 12 Valve 6 cylinder diesel engine. After you figure out how to mount it, you install no less than three turbos In a specific orientation. For three turbos, you first mount a turbo no smaller than 65mm, onto the stock or modified stock exhaust manifold. You then route that turbo to the intercooler mounted on the roof (for better air flow). Then you take the exhaust side of the turbo and route it above the hood. you then fabricate a Y-charge tube. The Y-tube runs to the compressor sides of 2 turbos no smaller than a stock cummins 57mm turbo. The exhaust finally leaves through the hater pipe. The turbos then run back down to the bigger turbo mounted to the manifold and feed it with fresh air. No body has yet attempted 4 turbos on a turburban (mostly because there is only one so far), But an idea for a forth turbo is to put another 57mm on top of the hater pipe and Y that into either the charge tube to feed the turbos above the hood, or feed it to the turbo underneath the hood. Thank you for your time reading this post, have a halfway decent day.