User talk:Kneestoday

'''Viscosity of Copper slags

Viscosity-composition Relationship'''

For most typical slags the content of several minor components(Al2o3, Mgo , Zno) Has been varied , and their influence on the slag viscosity has been investigated. Al2o3 markedly increases viscosity beyond 7%, Zno is the best basic reagent to lower viscosity and 5% Mgo gives the highest viscosity.

Viscosity-composition Relationship

Several authors have claimed that some indices of viscosity exist that lead to fairly simple relationships with chemical compositions at constant temperature. Winterhager and Kammel[1] proposed the equations

Viscosity = a/(Kz-b)        (1)

a and b are constants; equation valid when Kz is of low value, and

'''Viscosity = c-d. Kz'''          (2)

c and d are constants; equation valid when Kz is of high value. viscosity module' Kz is written:

'''Kz = [ %Feo+%Cao+%Mgo+%Zno+%Pbo]/ [%Sio2+%Al2o3]'''                   (3)

Higgins and jones[2] correlated viscosity with a "modified viscosity ratio" ,MVR, which we adapted as follows:

MVR ={ 056[Al+3]+1.40[Si+4]}/ {0.44[Fe+2] +0.36[Ca+2] +0.46[Mg+2] +0.44[Zn+2] +0.29[Pb+2]}                             (4)

In neither case was it possible to obtain a satisfactory correlation between the indices and viscosity of the slags. The trends of the plots were correct, but the dispersion of the values was very high , particularly at low temperatures.

References

[1] Butts A. Metallurgical problems, 2nd edn (New York:McGraw-Hill ,1943),446p.

[2]Kubaschewski O.Evans E.L1.And Alcock C.B.Metallurgical thermochemistry ,4th edn (Oxford ,etc.:pergamon,1967),495p.

Image copyright problem with Image:Wear in 2008.pdf
Thank you for uploading Image:Wear in 2008.pdf. However, it currently is missing information on its copyright status. Wikipedia takes copyright very seriously. It may be deleted soon, unless we can determine the license and the source of the image. If you know this information, then you can add a copyright tag to the image description page.

If you have any questions, please feel free to ask them at the media copyright questions page. Thanks again for your cooperation. NOTE: once you correct this, please remove the tag from the image's page. STBotI (talk) 10:51, 29 February 2008 (UTC)

Image copyright problem with Image:Adhesive Wear mechanism.pdf
Thank you for uploading Image:Adhesive Wear mechanism.pdf. However, it currently is missing information on its copyright status. Wikipedia takes copyright very seriously. It may be deleted soon, unless we can determine the license and the source of the image. If you know this information, then you can add a copyright tag to the image description page.

If you have any questions, please feel free to ask them at the media copyright questions page. Thanks again for your cooperation. NOTE: once you correct this, please remove the tag from the image's page. STBotI (talk) 04:35, 1 March 2008 (UTC)

Image copyright problem with Image:Image.pdf
Thank you for uploading Image:Image.pdf. However, it currently is missing information on its copyright status. Wikipedia takes copyright very seriously. It may be deleted soon, unless we can determine the license and the source of the image. If you know this information, then you can add a copyright tag to the image description page.

If you have any questions, please feel free to ask them at the media copyright questions page. Thanks again for your cooperation. NOTE: once you correct this, please remove the tag from the image's page. STBotI (talk) 11:15, 1 March 2008 (UTC)

Wear
Please refrain from making test edits in Wikipedia articles even if your ultimate intention is to fix them. Such edits appear to be vandalism and have been reverted. If you would like to experiment again, please use the sandbox. Wnzrf (talk) 22:15, 2 March 2008 (UTC)

Article creations
Hi. I note you've created a number of new articles, such as Calculations on Scrap addition during copper blowing. May I suggest reading some help files, such as Help:Contents/Editing_Wikipedia and Your first article before creating articles, to learn the markup and presentation standards that Wikipedia has? If you have any questions, please feel free to ask at the help desk, or on my own talk page. Good luck, and happy editing! Lankiveil (speak to me) 11:49, 13 March 2008 (UTC).
 * Wikipedia is not a technical journal nor should you use it to draft articles for a technical journal. I think you should be working elsewhere. -- RHaworth (Talk | contribs) 12:16, 13 March 2008 (UTC)
 * kneestody:I created to improve and check my skills for editing.
 * kneestody: Because the password of the User:Masoud Sheykhi was forgotten, the User:kneestoday is doing the duty of the User:Masoud Sheykhi.

DISCIPLINES IN TRIBOLOGY
A proposed deletion template has been added to the article DISCIPLINES IN TRIBOLOGY, suggesting that it be deleted according to the proposed deletion process. All contributions are appreciated, but this article may not satisfy Wikipedia's criteria for inclusion, and the deletion notice should explain why (see also "What Wikipedia is not" and Wikipedia's deletion policy). You may prevent the proposed deletion by removing the  notice, but please explain why you disagree with the proposed deletion in your edit summary or on its talk page. Also, please consider improving the article to address the issues raised. Even though removing the deletion notice will prevent deletion through the proposed deletion process, the article may still be deleted if it matches any of the speedy deletion criteria or it can be sent to Articles for Deletion, where it may be deleted if consensus to delete is reached. If you agree with the deletion of the article, and you are the only person who has made substantial edits to the page, please add  to the top of DISCIPLINES IN TRIBOLOGY. — BradV 05:17, 11 April 2008 (UTC)

April 2008
Hi, the recent edit you made to DISCIPLINES IN TRIBOLOGY has been reverted, as it appears to be unconstructive. Use the sandbox for testing; if you believe the edit was constructive, ensure that you provide an informative edit summary. You may also wish to read the introduction to editing. Thanks. Cometstyles 10:34, 11 April 2008 (UTC)


 * I assume that by blanking the article that you created you wanted the page deleted. I have tagged the page as such. LittleOldMe (talk) 10:38, 11 April 2008 (UTC)

Image:Figure.pdf