User talk:Kreinkee000

Making Wooden Fishing Lours
In the production of wooden fishing lours safety is our number 1 concern. You need safety glasses and vises when nesacary. First you must make you cut out with a jig saw or any type of saw to get the "ruff" cut. Then what i do is use a belt sander that is clamped to my work table. then i sand it down to the roundness and size iwant it. But before i snad it i liketo cut a lip into it while it still has a square edge. this will make it straight and easier to install the lip. Then once i have it sanded to the liked way, I then cut a lip out of plexiglass in the same method as the wood. Then i just take a little super glue to hold it in the wooden lour. Finally a paint and clear coat to keep it water tight. Then with screw in hooks th lour is complete. If the lour does not sit right on the water try to drill a hole in the bottom or where nessacary and take a small fishing weight and melt it into the hole using a simple soldering gun. Be carefull not to burn Yourself! then paint over the lead to complete the lour. Test it out and happy trails!