User talk:Kumar113

Low cost efficient wood burning stove designed by Ashvini kumar hulithala

In countries like India people living in villages mostly use biomass as coking fuel  but there are no cheap and efficient wood burning stoves   as a result smoke and particulate matter generated by this stove become an environmental hazard and at the same time  it will have  bad effects on the  health of the cook  mostly the woman of the house  as the Smokey stoves are not efficient  consumes more fuel  draining on forest resources  and producing dirty gasses    these  stoves need constant blowing into fire by mouth  draining the energy of the cook

To solve all the above problems following criteria was  kept in mind by me while designing the simple low cost wood burning stove

1)	The stove should be efficient 2)	Should emit as less smoke as possible 3)	Fire should burn without much attending ie blowing by mouth 4)	It should be possible to build with locally available materials 5)	It should be possible to build the stove by an ordinary man having very simple skills    ie  by a house wife 6)	It should be cheap to build ( you can not ask one to invest  15 -20 $ to build a stove in a country  where the average income of biomass burning people  is less than 2$ ) 7)	As for as possible flame should be visible  from outside  as house wife  associates  good burning with  good flame 8)	It should be possible to burn most of the biomass fuels with the stove 9)	It should be quick ie should boil water quickly 10)	Easy for the user to light and attend the fire

Then I designed this simple wood burning stove  meeting all the above criteria to a larger extent The efficiency when use d with blackened pot is at least about 56% much better than most of the wood burning stoves Instead of bricks even mud or un burnt bricks can be used thus reducing  outside products to only  few ¼ inch rods. Except the top portion ie draft tube all other dimensions  can be changed  or modified without much change in the efficiency / working The stove boils 2.5 litrs of water in 10- 12 mins while the ambient temperature is 17 degree centigrade so it is comparable with gas stoves. As the inside of the combustion chamber and draft tube are insulated all the heat produced by the fire is transferred to pot   more efficiency As fire burns on a rod grid more air is drawn into fire  making a more complete  combustion  so less smoke Fire burns at a higher temperature so a clean fire more hot flue gasses transfer heat to the pot efficiently   As the fire is hot less chances  of  fire getting extinguished  thus less attending The speed of flue gasses is more compared to other stoves so the flow breaks a stagnant barrier making  hot gasses to touch the pot so increased efficiency Details of construction The construction details are here  and you can see some more photos   when you go through all  these it should be possible for you to construct one by yourself   for more details you may contact me at  email ashvinikumarhulithala@yahoo.com  or P.B.No 113 H.P.O Madikeri  Kodagu Karnataka  India   pin 571201

Stove at work

Front 	Top