User talk:Logan at Vortex

Welcome!
Hello, VortexMKTG, and welcome to Wikipedia! I hope you like the place and decide to stay. Unfortunately, one or more of the pages you created, such as Salina Vortex Corporation, may not conform to some of Wikipedia's guidelines, and may not be retained.

There's a page about creating articles you may want to read called Your first article. If you are stuck, and looking for help, please come to the Teahouse, where experienced Wikipedians can answer any queries you have! Or, you can just type help me on this page, followed by your question, and someone will show up shortly to answer your questions. Here are a few other good links for newcomers: I hope you enjoy editing here and being a Wikipedian! Please sign your name on talk pages using four tildes ( ~ ); this will automatically produce your name and the date. If you have any questions, check out Questions or ask me on my talk page. Again, welcome! Exemplo347 (talk) 22:12, 24 March 2017 (UTC)
 * Your first article
 * Contributing to Wikipedia
 * Biographies of living persons
 * How to write a great article
 * The five pillars of Wikipedia
 * Help pages
 * Tutorial

Speedy deletion nomination of Salina Vortex Corporation


A tag has been placed on Salina Vortex Corporation, requesting that it be speedily deleted from Wikipedia. This has been done under section G11 of the criteria for speedy deletion, because the page seems to be unambiguous advertising which only promotes a company, product, group, service or person and would need to be fundamentally rewritten in order to become encyclopedic. Please read the guidelines on spam and FAQ/Organizations for more information.

If you think this page should not be deleted for this reason, you may contest the nomination by visiting the page and clicking the button labelled "Contest this speedy deletion". This will give you the opportunity to explain why you believe the page should not be deleted. However, be aware that once a page is tagged for speedy deletion, it may be removed without delay. Please do not remove the speedy deletion tag from the page yourself, but do not hesitate to add information in line with Wikipedia's policies and guidelines. If the page is deleted, and you wish to retrieve the deleted material for future reference or improvement, then please contact the. Exemplo347 (talk) 22:12, 24 March 2017 (UTC)

Your username
Welcome to Wikipedia. I saw that you edited or created Salina Vortex Corporation, and I noticed that your username, "VortexMKTG", may not comply with our username policy. Please note that you may not use a username that represents the name of a company, group, organization, product, or website. Examples of usernames that are not allowed include "XYZ Company", "MyWidgetsUSA.com", and "Foobar Museum of Art". However, you are invited to use a username that contains such a name if it identifies you personally, such as "Sara Smith at XYZ Company", "Mark at WidgetsUSA", or "FoobarFan87".

Please also note that Wikipedia does not allow accounts to be shared by multiple people, and that you may not advocate for or promote any company, group, organization, product, or website, regardless of your username. Moreover, I recommend that you read our conflict of interest guideline. If you are a single individual and are willing to contribute to Wikipedia in an unbiased manner, please create a new account or request a change of username, by completing this form, choosing a username that complies with our username policy. If you believe that your username does not violate our policy, please leave a note here explaining why. Thank you. Exemplo347 (talk) 22:13, 24 March 2017 (UTC)

Copy for Salina Vortex Corporation
Per your request, below is the copy from your deleted article. Feel free to delete the copy below once you save it elsewhere. Also, be aware of conflict of interest issues, as others have pointed out, as you work on this article. --SouthernNights (talk) 20:45, 27 March 2017 (UTC)

Overview
The Salina Vortex Corporation (often referred to as Vortex, Vortex Valves, or Salina Vortex) is an American multinational corporation headquartered in Salina, Kansas. The company develops custom iris valves, slide gates, diverter valves, loading spouts, and other engineered solutions for use in product transport, flow control and the material handling of dry bulk solids in manufacturing processes. Vortex operates global offices in Europe, Latin America and Asia Pacific, and is represented in more than 40 countries.

How it all started
In 1977, Lee Young, co-founder and chairman of Vortex, and his father-in-law, Neil Peterson, founded Vortex.

Neil, a mechanical and process engineer, discovered that traditional butterfly valves and {Gate valve|knife gate valves]] were well designed for handling gas and liquid, but had deficiencies in handling dry bulk solids. Both butterfly valves and knife gates tended to pack dry material against the seals, preventing the valve from actuating to a fully closed position. In addition, the soft seals utilized in butterfly valves and knife gates were susceptible to deterioration when impacted by dry bulk solids. This caused material and air leakage when a valve was in the closed position. Replacement of the seals and worn parts created expensive downtime issues for manufacturers, as the valves had to be removed from the process line for maintenance. The disk of a butterfly valve also creates an obstruction in material flow, causing the disk and the dry materials to bridge and degrade.

To address these key issues, Neil made an initial prototype of the Vortex Orifice Gate in a vacated military building from the Cold War, located on Schilling Air Force Base in Salina, Kansas. The pneumatically actuated gate features a sliding, stainless steel plate situated between two hard polymer seal plates. A hole is machined into the sliding steel plate to match the diameter of a manufacturing process’ conveying valve, allowing dry material to pass through it. The design also incorporates shims, allowing maintenance personnel to perform simple adjustments while the valve remains in-line. Neil also incorporated a variable position control package, allowing the valve to act as a metering device for material dosing and weighing applications.

In 1980, Vortex was awarded a patent on the Orifice Gate.

Vortex "Baby Boom"
Throughout the 1980s decade, Vortex invented and patented the Wye Line Diverter, the Roller Gate, the Clear Action Gate, the Flex Tube Diverter, the Gravity Vee Diverter, the Multi-Port Diverter and the Quick Clean Orifice Gate.

Now housing 94 employees, Vortex left its 5,000 sq ft military building in 2006 and built a state-of-the-art, 125,000 sq ft manufacturing facility and office complex near Interstate 135. Soon after, Vortex created and patented the Aggregate Diverter and the HDP Slide Gate. The HDP’s “rising blade” allows the valve to seal demanding conveying pressures, as well as handle sticky or abrasive dry bulk solids.

By summer, Vortex offered 14 different slide gates and diverter valves.

Vortex still growing
In 2013, Vortex acquired a loading spout company and added dustless loading spouts to their product mix. This allowed Vortex to offer a product mix of retractable loading spouts, positioners and loading spout filtration systems for loading and conveying dry bulk materials into open or enclosed trucks, lorries, railroad cars, tankers, ships, barges or for stockpiling.

In October 2014, Vortex added 64,000 sq ft to its shop floor, added another wing of office space, incorporated lean manufacturing methods, and built a new cafeteria and storm shelter to better accommodate its now more than 200 employees.

Vortex Headquarters
As the parent company, Vortex Headquarters is the sole manufacturer of Vortex products. Now situated in a 200,000 sq ft facility, Vortex Headquarters houses supporting departments in customer service, inside sales, outside sales, supply chain and logistics, accounting, marketing, information technology, quality control, and engineering. The complex includes a dining annex, as well as Lee Young University, a large conference room intended for company meetings and visitors to the Salina, Kansas facility.

Vortex Global Limited
Vortex opened its first global office, Vortex Global Limited, in Darlington, England, to better accommodate European clientele.

Vortex Latin America
Vortex Latin America was established to better service Spanish-speaking clientele in Central and Latin Americas.

Vortex Asia Pacific
Vortex Asia Pacific was opened to support the Asia Pacific market. Vortex also entered Central Europe to service France, Switzerland, Germany, and Austria. Vortex now has representatives in more than 40 countries around the world.

Industries
As of 2017, the Salina Vortex Corporation services the following industries:
 * Aggregates
 * Agriculture
 * Aquaculture
 * Cement
 * Chemical
 * Coal
 * Coffee and Tea
 * Dairy
 * Energy & Power
 * Foods
 * Industrial Sand
 * Milling
 * Mining
 * Minerals
 * Pet Food
 * Petrochemical
 * Plastics
 * Pharmaceuticals
 * Rubber
 * Textiles
 * Tobacco
 * Wood & Pulp