User talk:Muzafir1207

1.  Title of Project:  electromagnetic engine (the next generation engine)

2.  Particulars of the Educational Institution sponsoring the project:

2.1. Name                                                                         :  caarmel engineering college

2.2. Address                                                                      :  koonamkara.po, Ranny Pathnamthitta Pin:689711

2.3. Phone No. (with STD code)		                                          :              04735-240990/1/2/3

2.4. Fax. No. (with STD code)		                                          :04735-240383 2.5. E-mail ID			                                                  :info@bccaarmel.org 2.6. Name of Head of Institution		                                  :Dr.joby.v.paul 3.  Particulars of project team members(Team leader's name first) 1	 Vipinkrishnan.g 2	 Girish.s 3	 Krishnadas.m.s

3.1 Contact particulars of team member(s):

3.1 Contact particulars of team member(s):

SN
 * Name and Address (Residence)	**Phone No:	**E-mail ID

1                Vipinkrishnan.G                                                                                      04792332941

Ottathengil Pallickal.NM                                         9446687446         vipinkrishanan07@gmail. Pallicakal.po                                                                       com Kayamkulam.pin:690503

2	            Girish.s                     Kochukadampattuvilayil Chellakkadu p.o                    Ranny                                                       9995585435         girishbg4u2@gmail.com

Pin:

3                  krishnadas.m.s                                           9447704018         krrish.krishnadas@gmail Madakodiparambu                                                                .com Poonithura.po                   Ernakulam 682038


 * Postal address (with PIN code)


 * Give own or contact person’s e- mail ID and Phone No. (With STD code, if applicable). If that of a contact person, state below the e-mail ID and the Phone No. the contact person’s name and his/her relationship with the inventor (father, mother, teacher, friend, etc.)

4.	Details of the project(In about 300 words):

4.1	Summary of project objectives and key ideas We are now going to introduce a new type of vehicle engine. That works with the principle of magnetic repulsion. Now a days the vehicle pollution and the high cost of petrol are highly emerging problem, the vehicles gives out many pollutants to the atmosphere which is very harmful for the Atmosphere ,ozone layer and for the living animals. In Oder to avoid all these problems we are designed a new vehicle engine. This is with the help of a new innovation that the Vehicle is run with the help of the electromagnetic repulsion .the construction of this machine is simple than any other IC or CI engines .the piston is mounted with a magnet. The top dead center is magnetized with an electromagnet and it is connected to a pulsed circuit to provide the magnetic property only at a given time interval (as same interval when the spark is given in the IC engines). When we crank the engine the piston will move to the top dead center when it almost reached the TDC the circuit works and create a magnetic field (these magnetic fields are of same poles ;this condition is pre arranged ) .as they are of same poles they will  repel each other. And comes to BDC the flywheel connected to this arrangement will then continues the operation. And the engine runs more efficiently than the petrol engine .if adjust the time period we can also provide two power stroke and the engine can run at more powerfully. 4.2 Detailed description with diagrams wherever required The above explained is the principles behind the engine .we are now trying to run a 50cc engine with this principle .it will be a great advantage if this engine works as the fossil fuels are non renewable energy source it should be replaced .this is the only way we have with more than the efficiency of normal engines. When we crank the engine the piston will move up to TDC .The allowable distance of the piston in the top of the cylinder is called TDC. The minimum allowable distance of the piston is called BDC. TDC is fitted with a temporary magnet. Piston is mounted with a magnet with top area as a South Pole and bottom area as north .the temporary magnet set up such that it is only activated at the when

The piston almost reached the TDC. The piston will now moves to the BDC. Because same poles are repels each other. Here the reciprocating motion of the piston is converted to rotary motion in crank shaft by the mechanism of slider-crank. Whenever the piston reach the BDC the timing controller stop the given power what we are given to produce the magnetic field. So the TDC demagnetized. By the crank shaft rotation the stored energy of the crank is given to the connecting rod to move a piston to TDC in next cycle. The cycles can repeat because of the rotation of the flywheel.

Benefits: 1)	No petrol needed 2)	Low maintenance than petrol engine 3)	100% economical 4)	If developed can be used for all types of vehicles 5)	100% pollution free 6)	Lubrication Oil needed is very less 7)	Less expensive than normal e-bikes 4.3 Originality or Novelty of the Invention and advantages over other known alternatives: [Briefly state the originality or novelty incorporated in the invention; may be, in comparison to the existing device(s) used, if any, for the intended function(s); i.e., the original contribution of inventor(s)] Petrol engines give out anonymous amount of pollutants to the environment .but the electromagnetic engines are the perfect zero emission engines .The petrol engines are heat engines and the produce a huge amount of heat inside the engine there must be a highly efficient cooling must be provided. But the electromagnetic engines are working on the principle of the electromagnetic attraction. And there is no wastage of energy as heat. The electromagnetic engines can be easily converted to 4stroke or 2stroke engine by just adjusting the trigger. Now days the e-bikes of verity of models are available .but the main disadvantage of less speed of this vehicles and another drawback of this engine is we can’t attach a gear system to this engine. This new design will have an advantage of high speed and high torque. 4.4 Literature, if any, reviewed on the relevant topic: No records exact to this topic where found.

4.5 Anticipated area(s) or field(s) of its use/application: The heat engines are high emission engines and they gives out huge amount of pollutants to the environment .the E-bikes now using have the drawback of the low power output and speed .the solution for all these problems are the electromagnetic engine.

4.6 Present status: (Briefly state the work already completed and what remains):

4.6.1	Work done We have bought a 50cc engine and started the work. We are now behind the design part. Have to finds a highly ferromagnetic material for work as the temporary magnet and find a highly magnetized permanent magnet. 4.6.2	Work remaining Almost the alteration of the engine is done. Other works are in progress