User talk:Sincow

Air slide Fabrics are used to transport solids with a high flow rate over long distances. Air slides provide an efficient, low energy system with minimum maintenance. They are available with multiple inlets and multiple outlets by use of integrated segment valves.

Air Gravity Conveying System based on HHH technology uses the forces of gravity to do most of the work without any moving parts.Airslide Air Gravity systems provide high capacity material handling while offering many economical and environmental advantages.Energy requirements are minimal because only a small volume of air at a low pressure is required to move material. Since the system is installed overhead, valuable floor space and added headroom are available for other purposes. By eliminating the need for massive support members, it permits a flexibility of plant design not available with straight-line conveyors.The Airslide conveyor is dust tight. As a result, the system is extremely friendly to the environment.Noise level is extremely low in the area surrounding the Airslide conveyor as the system’s air supply is the only moving part to generate noise, and it is generally located in a remotely insulated area to further reduce noise. Maintenance of the Airslide conveyor is very simple because there are no moving parts other than the air supply equipment, which also contributes to increased plant safety.

Air Slide Conveyor Systems HHH air slide conveyor systems will quickly and efficiently convey materials such as raw and finished cement, fly ash, and precipitator dust. The simple combination of air pressure and gravity allows powdered materials to flow like a fluid. Air slide conveyors are very efficient and quiet. And with no moving parts, these conveyors are also extremely cost effective and require very little maintenance.

SPECIFICATIONS AND FEATURES: Upper and lower bodies are formed from 10 gage steel, with 1/4” steel end flanges. Maximum section length is 12’. Each section is independently pressurized and requires only a single air inlet. • Flow regulation through air pressure regulation • Extremely quiet operation • Low maintenance, no moving parts • Minimal wear from abrasion • Low pressure requirements, 0.5—5.0 psi

SYSTEM DESIGN: Air slide conveyors can be used in a single straight run, but are equally as effective when used in large systems. Through the use of turn boxes, conveyors can easily change directions, merge, or split without the need for powered conveyors or diverters. Manual or powered shut off gates can be integrated into any point of the system to control flow. The maximum range of the conveyors are limited only by the height of the source. Conveyors require a minimum of a 5 degree drop angle to function properly. A 10 degree angle is recommended for most applications. Air slide conveyors also utilize traditional conveyor components such as diverter gates, flow controls, shut-off gates, and discharge chutes. Air slide technology can also be applied to your existing or newly manufactured storage bins. for more information, please see it in airslide.net

December 2010
Please stop removing speedy deletion notices from pages that you have created yourself. If you continue, you may be blocked from editing Wikipedia. jsfouche &#9789;&#9790; Talk 01:55, 27 December 2010 (UTC)

This is your last warning; the next time you remove a speedy deletion notice from a page you have created yourself, as you did at Air slide, you may be blocked from editing without further notice. → ♠ Gƒoley ↔ Four ♣ ← 02:03, 27 December 2010 (UTC)