User talk:Vinpearl cable car

Vinpearl Cable Car

0.     Location: Nha Trang / VIETNAM 1.	Speed: 6m/s with capacity 1500 SH/H. 2.	Height of towers( T ) ( caculated from sea level to main beams) T2 - T3: 57 (m). T3 - T4: 52 (m). T4 - T5: 46(m). T5 - T6: 44 (m). T6 - T7: 40 (m). T7 - T8: 36 (m). 3.	Length: 3,310 m including off ashore 07 towers and ashore 02 towers ( Total: 9 towers ). 4.	To buid pillars into ground of seabed ( bottom of the sea) with the depth (for each towers with 04 pillars) as follows: T2	T3	T4	T5	T6	T7	T8 Pillar 1	-29.82	-42.70	-56.29	-55.76	-72.66	-63.46	-45.75 Pillar 2	-30.40	-42.90	-52.60	-51.61	-83.34	-60.44	-43.65 Pillar 3	-30.40	-42.75	-54.24	-51.57	-87.94	-60.29	-43.87 Pillar 4	-30.40	-42.80	-54.44	-62.58	-73.90	-62.90	-45.64

5. Safe elements of system included : -	VIGI 251 system for checking the wrong cable in position. -	Sensor system for checking the wrong cable in position on sheave trains of towers. -	Wind meter to be put on the top of each tower in order to measure the speed of wind and transmit all data to the control panel, the Vinpearl GD8 can work with speed of wind: 72 km/h. -	Multi-cable system with 28 pairs,stwisted in accordance with standard, insulation. -	Safety of system is controlled strickly by automatic program through PLC S7 400F of SIMENS made by. PLC oversees and controls whole system acording to programmed job. Beside there are some PLC-Simens- model F(Failsafe) following the overheat, overload etc… -	The Gondola lift of POMA reached the best safety in accordance with regulations of Europe safety Standards for gondola lift used for passengers only, refer to NF EN 12 929, promulgated 2005. -	Sensor group for checking the wrong cable in position on the line and stations. -	System of Safeline 3.1 for overseeing safety installed and controlled by PLC to assist operators who can located and find erorrs (if any).