User talk:Wo211

Welcome!

Hello,, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are some pages that you might find helpful: I hope you enjoy editing here and being a Wikipedian! Please sign your messages on discussion pages using four tildes ( ~ ); this will automatically insert your username and the date. If you need help, check out Questions, ask me on, or ask your question on this page and then place  before the question. Again, welcome! Beeblebrox (talk) 06:30, 28 April 2009 (UTC)
 * The five pillars of Wikipedia
 * Tutorial
 * How to edit a page
 * How to write a great article
 * Manual of Style

Speedy deletion of User:Wo211
A tag has been placed on User:Wo211, requesting that it be speedily deleted from Wikipedia. This has been done under section G11 of the criteria for speedy deletion, because the page seems to be blatant advertising which only promotes a company, product, group, service or person and would need to be fundamentally rewritten in order to become an encyclopedia article. Please read the guidelines on spam as well as FAQ/Business for more information.

If you think that this notice was placed here in error, you may contest the deletion by adding  to the top of the page that has been nominated for deletion (just below the existing speedy deletion or "db" tag), coupled with adding a note on the talk page explaining your position, but be aware that once tagged for speedy deletion, if the page meets the criterion it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the page that would render it more in conformance with Wikipedia's policies and guidelines. Lastly, please note that if the page does get deleted, you can contact one of these admins to request that they userfy the page or have a copy emailed to you. Beeblebrox (talk) 06:29, 28 April 2009 (UTC)

FYI conflict of interest guideline
If you have a close connection to some of the people, places or things you have written about, you may have a conflict of interest. In keeping with Wikipedia's neutral point of view policy, edits where there is a conflict of interest, or where such a conflict might reasonably be inferred from the tone of the edit and the proximity of the editor to the subject, are strongly discouraged. If you have a conflict of interest, you should avoid or exercise great caution when:
 * 1) editing or creating articles related to you, your organization, or its competitors, as well as projects and products they are involved with;
 * 2) participating in deletion discussions about articles related to your organization or its competitors;
 * 3) linking to the Wikipedia article or website of your organization in other articles (see Spam); and,
 * 4) avoid breaching relevant policies and guidelines, especially those pertaining to neutral point of view, verifiability of information, and autobiographies.

For information on how to contribute to Wikipedia when you have conflict of interest, please see our frequently asked questions for organizations. For more details about what, exactly, constitutes a conflict of interest, please see our conflict of interest guidelines.

See also: User page — Athaenara ✉  07:15, 28 April 2009 (UTC)

Sandwich structured composite
Composite [url=http://www.jaxdchina.com/include/company.asp]sandwich panel[/url] used for testing at NASAA sandwich structured composite is a special class of composite materials that is fabricated by attaching two thin but stiff skins to a lightweight but thick core. The core material is normally low strength material, but its higher thickness provides the sandwich composite with high bending stiffness with overall low density. Diagram of an assembled composite sandwich (A), and its constituent face sheets or skins (B) and honeycomb core (C) (alternately: foam core)Open and closed cell structured foam, balsa wood and syntactic foam, and composite honeycomb are commonly used core materials. Glass or carbon fiber reinforced laminates are widely used as skin materials. Sheet metal is also used as skin materials in some cases. The 1940 de Havilland Mosquito was built with [url=http://www.jaxdchina.com/include/company.asp]sandwich panel[/url], the balsa-wood core had on both sides plywood as the skin [1]. Recycled paper is also now being used over a closed-cell recycled kraft honeycomb core, creating a lightweight, strong and fully repulpable composite board. This material is being used for applications including point-of-purchase displays, bulkheads, recyclable office furniture, [url=http://www.jaxdchina.com/include/company.asp]sandwich panel[/url] and wall dividers.

Section through a typical EPS sandwich panel
[url=http://www.jaxdchina.com/]Sandwich panel[/url] are typically single piece, modular factory engineered units comprising two metal faces and a fully insulating core. The metal facings are fully bonded to the core so that the panel acts compositely when under load, in most cases, providing free sandwich panel. Facings used for insulated panels are predominantly of steel. The insulating core is typically bonded to the facings using a conventional adhesive bond. If other than EP, the core material is usually a material that provides good thermal insulation properties. The [url=http://www.jaxdchina.com/]Sandwich panel[/url] are typically manufactured on a continuous production line, as shown below.

Life-cycle cost optimization of steel structures
This article addresses the life-cycle cost optimization of [url=http://www.jaxdchina.com/]steel structure[/url]. The main factors influencing the life-cycle cost of a structure are delineated and their effects on various cost functions are discussed. A four-criteria optimization model is presented for the life-cycle cost optimization of [url=http://www.jaxdchina.com/]steel structure[/url]. These criteria are (i) select discrete commercially available sections with the lowest cost, (ii) select commercially available sections with the lightest weight, (iii) select the minimum number of different types of commercially available sections, and (iv) select commercially available sections with the minimum total perimeter length. The last criterion models a representative type of cost incurred over the life of the structure, that is, preventative maintenance in the form of periodic painting of an exposed [url=http://www.jaxdchina.com/]steel structure[/url] to avoid corrosion. The life-cycle cost optimization model is based on fuzzy logic with the goal of formalizing the life-cycle design process but with some input from the design engineer through introduction of weighting coefficients reflecting the relative importance of various criteria. The model is applied to a large steel structure with over 3300 members.

High speed steel structure component fabrication
PANCELTICA has acquired New Zealand-based Scottsdale and incorporated its metal fabrication technology which cuts the time needed to fabricate components for light-weight steel-framed structures. According to the company, central to the technology is a piece of roll forming machinery which turns coils of high-tensile steel into pieces of metal which are joined together to make [url=http://www.jaxdchina.com/]steel structure[/url]. The company claims the resulting metal pieces are joined together much like a Meccano kit. The technology is said to accelerate the fabrication of new[url=http://www.jaxdchina.com/]steel structure[/url] by a factor of eight compared to traditional cement-and-concrete construction methods. It can also reduce the transportation of raw materials. The fabrication machine can be transported to remote locations. It can also create other components such as external cladding, internal finishing and infill panels. The metal fabricator says it is possible to build an entire structure in 31 days, from the steel coil stage to the skeleton of the building.