Wikipedia:Featured picture candidates/Shrine of remebrance

Shrine of Remembrance
Nice photo of the Shrine. Other versions: Image:melbourne_war_memorial02.jpg, Image:pillars_at_front_of_war_memorial.jpg
 * Support Self Nom. --Fir0002 07:12, 23 October 2005 (UTC)
 * Comment. It looks a little dark I think. Enochlau 11:13, 23 October 2005 (UTC)
 * Comment: It's rather dark and you have dust on your sensor! Lots of it. Better clean it off. In the meantime, I think I will do some healing. Edit: Man, that picture was livid with dust spots! I don't want to sound negative, but I think you might want to have your camera's sensor cleaned off, or at least blow on it with some compressed air. Anyway, I think I got most of them. How's this?
 * Thanks for your work, but I think the photo has lost too much of the warm hues of sundown. The sensor itself won't have dust on it as there is filter in front of it; even so, I don't know about the photo being livid with dust! But dust is a problem I have noticed with the 20D, whenever you use high shutter speeds it tends to dislodge tiny dust specks. And of course dust for some reason perfers to settle on a nice clean lens face than on anything else! Its quite a common problem with DSLR's. Anyway I have cleaned it since that photo was taken (which was about 1/2 a year ago), but I prefer not to fiddle down if possible (much rather use the clone tool in Photoshop).
 * I can upload the orignal file if you really want a crack at adjusting that - but I prefer not to upload the originals as it takes forever - and I like to keep the full size my own.
 * Fir002 - Your sensor does indeed have a lot of dust on it. You're right though, there is a filter a couple of mm above the actually CMOS itself, and the filter has dust on it. The reason why you see it in higher shutter speeds is not a function of the shutter speed itself, but rather the fact that in program mode when photographing a brightly lit subject, which I am assuming you've used, it will generally use a balance of stopped down aperture and slower shutter speed. It is the stopped down aperture that increases the visibility of the dust on the sensor. When light passes through a a tight aperture, it hits the sensor at a much 'straighter' angle (because the light coming in at an angle is blocked by the aperture), and the specks of dust create a more visible shadow. When light passes through a wide open aperture, there is a greater chance of it coming in at an angle, and thereby hitting the sensor 'around' the speck of dust. Thats the basic explanation for it, anyway. I recommend you investigate cleaning solutions for the camera. It isn't essential but you will minimise the amount of dust that accumulates on the sensor if you clean occasionally. The longer you have the camera, the more dust you'll get. Its very unlikely to go away by itself. :) Diliff 02:18, 25 October 2005 (UTC)
 * Thanks for your detailed comments Diliff, but I was aware of the issues you raised there. I read this website (which at the time of writing this comment seems to be down - hence the link to a google cached version) and it does a good job explaining the different options for cleaning the sensor (if you are using compressed air you'd want to be pretty carefull). I have obviously cleaned the sensor a few times, but as previously mentioned due to the difficulty and risk I do not clean often. Thanks again and sorry if I sound a bit tense. --Fir0002 09:56, 29 October 2005 (UTC)
 * No problem. I misunderstood and thought you had not yet tried to clean it. But I don't think high shutter speeds will 'dislodge' dust. It just accumulates over time. Nothing more to it really. ;) Diliff 15:15, 29 October 2005 (UTC)


 * Oppose. The shadow is too distracting. New edit has visible quantization and artifacts. Also a minor nitpick, there's a faint USM halo around the tower. Rhobite 22:43, 23 October 2005 (UTC)
 * Perhaps he could upload a less harshly compressed version? Also, you shouldn't vote support or oppose until the end of the second day when the bot moves the nomination into the voting section.
 * A less compressed version would be a step up, but I'm not sure that the shadow can be fixed. Please do not remove my vote again; I promise that I will change it myself if I feel the picture achieves featured quality in the future. Rhobite 23:01, 23 October 2005 (UTC)
 * Rhobite, the reason that your vote was removed is that you are not supposed to vote in the first two days of the nomination, only to comment. I do prefer the lighting of the edited version, but there are a lot of artifacts on the sky. Raven4x4x 05:58, 24 October 2005 (UTC)
 * Comment. I have uploaded another version --Fir0002 12:10, 24 October 2005 (UTC)
 * Ah, that's a lot better. Raven4x4x 12:40, 24 October 2005 (UTC)


 * Oppose. Although its a high resolution image and quite sharp (albeit a little too sharp, I can see haloes), I just don't like the overall composition that much. It has the look of a tourist snapshot and although you can basically see what the shrine looks like, it isn't really something I would consider exceptional in any way. This applies to all versions I think. :) Adjusting levels/saturation can make it look 'prettier' but not a better photo. Diliff 02:18, 25 October 2005 (UTC)
 * Oppose. Regardless of the touching up, I would have to agree with Diliff and say that composition-wise, the photo lacks a little umph. It shows the shrine ok, but there's nothing special about it. Enochlau 07:44, 25 October 2005 (UTC)
 * Oppose - don't like these Brookie: A collector of little round things 18:58, 31 October 2005 (UTC)

Raven4x4x 04:39, 6 November 2005 (UTC)

