Wikipedia:WikiProject Inna/Assessment

Welcome to the assessment page of WikiProject Inna, which focuses on assessing the quality of articles relating to Inna. The assessment is done in a distributed fashion through parameters in the WikiProject Inna project banner; this causes the articles to be placed in the appropriate sub-categories of Category:Inna articles by quality and Category:Inna articles by importance.

FAQ

 * See also the general assessment FAQ.


 * 1. What is the purpose of the article ratings?
 * The rating system allows the project to monitor the quality of articles in our subject areas, and to prioritize work on these articles. It is also utilized by the Wikipedia 1.0 program to prepare for static releases of Wikipedia content. Please note, however, that these ratings are primarily intended for the internal use of the project, and do not necessarily imply any official standing within Wikipedia as a whole.


 * 2. How do I add an article to the WikiProject?
 * Just add WikiProject Inna to the talk page; there's no need to do anything else.


 * 3. Someone put a WikiProject Inna template on an article, but it doesn't seem to be within the project's scope. What should I do?
 * Because of the large number of articles we deal with, we occasionally make mistakes and add tags to articles that shouldn't have them. If you notice one, feel free to remove the tag, and optionally leave a note on the talk page of this department (or directly with the person who tagged the article).


 * 4. Who can assess articles?
 * Any member of WikiProject Inna is free to add—or change—the rating of an article. Editors who are not participants in this project are also welcome to assess articles, but should defer to consensus within the project in case of procedural disputes.


 * 5. How do I rate an article?
 * Check the quality scale and select the level that best matches the state of the article; then, follow the instructions below to add the rating to the project banner on the article's talk page.


 * 6. Can I request that someone else rate an article?
 * Of course; to do so, please comment on the main project discussion page


 * 7. Why didn't the reviewer leave any comments?
 * Unfortunately, due to the volume of articles that need to be assessed, we are unable to leave detailed comments in most cases. If you have particular questions, you might ask the person who assessed the article; they will usually be happy to provide you with their reasoning.


 * 8. Where can I get more comments about an article?
 * People at Peer review can conduct a more thorough examination of articles; please submit it for review there, or ask for comments on the main project discussion page.


 * 9. What if I don't agree with a rating?
 * You can ask any member of the project to rate the article again.


 * 10. Aren't the ratings subjective?
 * Yes, they are somewhat subjective, but it's the best system we've been able to devise. If you have a better idea, please don't hesitate to let us know!


 * 11. What if I have a question not listed here?
 * If your question concerns the article assessment process specifically, please refer to the discussion page for this department; for any other issues, you can go to the main project discussion page.

Instructions
An article's assessment is generated from the class parameter in the WikiProject Alexandra Stan project banner on its talk page:



The following values for the class parameter may be used:


 * FA (adds articles to Category:FA-Class Inna articles; should only be used for articles that are currently listed as featured articles)
 * FL (adds articles to Category:FL-Class Inna articles; should only be used for articles that are currently listed as featured lists)
 * A (adds articles to Category:A-Class Inna articles; should only be used for articles that have made considerable progress upon the GA version, an article that is undergoing FA review would be A-class)
 * GA (adds articles to Category:GA-Class Inna articles; should only be used for articles that are currently listed as good articles)
 * B (adds articles to Category:B-Class Inna articles)
 * C (adds articles to Category:C-Class Inna articles)
 * Start (adds articles to Category:Start-Class Inna articles)
 * Stub (adds articles to Category:Stub-Class Inna articles)
 * List (for articles which consist primarily of a list; adds pages to Category:List-Class Inna articles)
 * Category (adds articles to Category:Category-Class Inna articles)
 * Template (adds articles to Category:Template-Class Inna articles)
 * NA (for pages where assessment is unnecessary)

The following values for the importance parameter may be used:
 * Top (adds articles to Category:Top-importance Inna articles)
 * High (adds articles to Category:High-importance Inna articles)
 * Mid (adds articles to Category:Mid-importance Inna articles)
 * Low (adds articles to Category:Low-importance Inna articles)
 * NA (for none articles, do not need importance rating for non-articles)

Articles for which a class is not provided are listed in Category:Unassessed Inna articles and articles for which an importance is not provided are listed in Category:Unknown-importance Inna articles. The class and importance should be assigned according to the quality scale below.

Quality scale
The quality "class" an article receives should follow Wikipedia's regular guidelines for quality found below.
 * Articles which have not been formerly evaluated, or which have failed a good article review, should not be assigned a quality rating higher than B class. Above that an article needs to go through a formal review process.


 * See Good article candidates
 * See Featured article review
 * See Category:Wikipedia editorial validation

Importance scale
For determining the Importance rating (Low, Mid, High, Top) please keep the following in mind:
 * Approximate breakdown of the percentage of articles in each category as a goal.
 * Low=55%
 * Mid=30%
 * High=15%
 * Top=1%