Wikipedia talk:WikiProject Automobiles/Archive 48

Hyundai and GM order according to OICA
An editor updated the production volume tables in the automotive industry article, allegedly following OICA. However, he repeated the questionable habit of listing GM ahead of Hyundai for, according to his notes, keeping consistency with previous OICA reports. However, I argued in the article's talk page that SAIC production shouldn't be arbitrarly added to GM production, and, if we really follow OICA, GM is the fourth group by production volume already, Hyundai is the third. We can't "fix" the order because either we disagree or we don't like Koreans. Besides, in my opinion that interpetation is questionable to say the least. The "SG.M.W" listed on the Saic table isn't "SAIC GM" as he claims, it's another joint venture called "SAIC-GM-Wuling", SAIC-GM production is actually counted in the General Motors table (as "China-Shanghai G.M."). SAIC is the owner of over 50% of SAIC-GM-Wuling shares, so it's pretty clear that joint venture production should have counted for SAIC from the start if it wasn't the case before, OICA actually fixed a mistake on its counting methods. We can't claim consistency for past reports on a single-source table. Either we follow that single source or we are saying that source is wrong and we shouldn't be using it. If we start to make our own groupings based on personal opinions, ignoring OICA, then we can (for example) claim that Renault-Nissan was actually the third largest in 2016, not GM, not Hyundai.

As I said, I already listed my concerns on a similar post in the article's talk page, but I also post here because that TP is rarely visited. Feedback (either for or against my position) would be greatly welcomed. --Urbanoc (talk) 16:46, 14 October 2017 (UTC)


 * Agreed. Either we follow the source (including its numbers, groupings and rankings) or we are in WP:OR territory (rearranging the rankings to our own criteria, ignoring the source). Can't have it both ways.  Stepho  talk 23:32, 14 October 2017 (UTC)


 * Based on the edit comments etc this might be editing without being logged in.  BjörnBergman has been active today.  This is the same IP [] who was editing the page a while back.  The IP editor is at 4 reverts today.  Given the history I suspect this is BjörnBergman.  If the edits don't stop I will file an edit war complaint.  Springee (talk) 00:29, 15 October 2017 (UTC)


 * Thanks both for your answer. Searching through old OICA tables, I found SAIC-GM-Wuling sales were initially not included in GM totals, then (apparently) added in the late 2000s, then removed again. SAIC GM/Shanghai GM sales were the only ones always included (and still are). That's I think another reason we shouldn't include our own research in the tables, because there're things we just ignore or are out of our competence. We don't really know the reason they (apparently) added SAIC-GM-Wuling, and we don't know why they now removed it. I think (just my opinion) it may be related to the fact that they seemingly standardised the counting criteria for foreign production in Chinese joint ventures, and now it only includes the ones where a foreign automotive company owns 50% or more (controlling or co-controlling stake) of shares and, from those joint ventures, only vehicles that are sold under the foreign company name (not joint venture marques, those always are counted for the local Chinese company) as counting for production. I will update the tables in the automotive industry article trying to follow closely the OICA source. If you find an error, don't doubt and fix it (I'm human after all). --Urbanoc (talk) 17:31, 15 October 2017 (UTC)

Euro_Car_Segment page references are wrong
Hi all,

this is a new one for me so excuse any mistakes. I was reading this article: https://en.wikipedia.org/wiki/Euro_Car_Segment and I tried to read the referenced material but found out that the links were wrong. However I don't know what the correct ones are.

The linked page in both #1 and #4 references is the same: http://ec.europa.eu/competition/mergers/cases/decisions/m1406_en.pdf

The "talk" page of the article led me to https://en.wikipedia.org/wiki/Wikipedia:WikiProject_Automobiles

Thanks, anonymous --62.1.56.68 (talk) 11:02, 23 October 2017 (UTC)


 * I fixed the duplicate references. What do you mean by "the links were wrong" ?  Stepho  talk 22:23, 23 October 2017 (UTC)

What is a production car?
We are having a discussion about what defines a production car at Talk:Production car speed record (also read the sections just above for context). This is so that we know which cars are eligible for production car speed records and which are not. Comments welcome at that talk page.  Stepho  talk 03:16, 18 November 2017 (UTC)

Mary Barra
Some edit warring going on here, I just want to make sure the paragraph below does not belong in the Mary Barra article, before I report the user and their anonymous IP:

"Barra has said 'We'll always continue to do the right thing, if we become aware of an issue were gonna take action', and 'No more crappy cars'[16]. Some have questioned the validity of such statements due to issues like the vibrations in the K2XX platform [17] widely reported and discussed [18] as the 'Chevy Shake' across social media, GM-Trucks.com, and ThisTruckSucks.com."

To me it violates WP:NPOV and WP:BLP. Not to mention "some have questioned" and forums like ThisTruckSucks are not reliable sources. This text also appears in Chevrolet Silverado and GMT K2XX, which are at least a little more appropriate but still reek of bitter customer complaining, especially since they're the only edits the user has made. --Vossanova o&lt; 18:10, 27 October 2017 (UTC)


 * I would agree. This is not encyclopedic.  It's a corporate vs personal issue and clearly an example of someone with an ax to grind.  Putting it on Barra's page would be an BLP issue because it's an accusation of bad faith.  Putting it in the car and corporate page would probably be UNDUE.  Springee (talk) 20:06, 27 October 2017 (UTC)


 * It is possible, and probably necessary, to include some of this without using YouTube or other primary sources, or self-published forums. Rewrite it and cite Fortune, CNN Money, Barra's biography, Automotive News, etc.There's no violation of BLP or NPOV here. It's simple case of weasel words "some have said", and using crappy sources instead of reliable ones. This kind of attitude of a CEO trying to turn a company around is not out of the ordinary or surprising. Lee Iacocca said far more provocative things. The edit summary "This is not the right place for customer complaints, or linking to them" is false. This bio should of course cover this category of information, it's central to Barra's work and goals. But it should only come from reliable sources, not forums or social media. When a CEO has said they are trying to turn a company around, we should not be coy about what they are trying to turn it around from.In short, instead of reverting, try rewriting and re-sourcing. That is what WP:BRD is saying you should do. You don't like what one editor did, so revise what they did with different words, better sources, a better tone, etc. They will likely revise what you did, and so on. You will likely end up agreeing. --Dennis Bratland (talk) 21:37, 27 October 2017 (UTC)


 * Putting those two "facts" together to draw a conclusion is a clear case of WP:SYNTH. Unless a reliable source is countering her claims with that evidence, it is not allowed for us to do it.  And Youtube isn't at all the right kind of source, as it isn't a secondary source here.  I don't care about the content on a personal level, but as an admin, I would consider it disruptive if they continue to add synth.  We don't draw conclusions, we document facts.  Dennis Brown - 2&cent; 23:13, 27 October 2017 (UTC)


 * IP editor returned. I've requested page protection.  Might be needed for the related pages of Chevrolet Silverado and GMT_K2XX.  Springee (talk) 12:26, 31 October 2017 (UTC)
 * I just went and protected the pages myself. The BLP alone was worth protecting. I'm pretty sure I haven't done any significant editing to either. Dennis Brown - 2&cent; 01:21, 18 November 2017 (UTC)
 * IMO, Dennis is right on the approach, but wrong on this content. The cited sources, on their names alone, would leave me doubting their neutrality & reliability, & for that, they'd fail for inclusion on a BLP page. If Fortune or C&D said it, & it was sourced, OTOH... Except it's not.  TREKphiler  any time you're ready, Uhura  09:51, 18 November 2017 (UTC)

Torque steering
Torque steering seems to be missing intentional use of torque for steering. It only covers the problem of unintentional unbalanced torque. IIRC it is normal for many caterpillar drive vehicles to use torque for steering control by applying differential torque to each track. And then there's stunt driving. -- 70.51.45.76 (talk) 09:36, 17 November 2017 (UTC)


 * Torque steering is always due to imperfections in the design and manufacture of the suspension and steering components. The different angles and lengths of the drive half-shafts is applied through rubber bushings and a flexible tyre wall that flex at times that we don't want. Whereas Caterpillar tractors and skid-steer loaders use differential steering which doesn't rely on the flexing of suspension and steering components. Unfortunately, differential steering doesn't seem to have a decent article or section that I can find.  Stepho  talk 00:55, 18 November 2017 (UTC)


 * Started Differential steering article today, for better or worse. -AndrewDressel (talk) 15:55, 23 November 2017 (UTC)


 * Looks very good.  Stepho  talk 22:07, 23 November 2017 (UTC)

Template:Infobox engine
As has already been noted by others, some of the label names for Template:Infobox engine are 'not ideal' at best. Using 'Emissions' instead of 'Exhaust' for example would be a good idea, given that the two parameters are all about that. The usage of 'Combustion chamber' is very wrong in the context and perhaps should be changed to 'Layout' or something better suited. While changing that maybe the order of the parameters can be re-sorted to: configuration / displacement / valvetrain / bore / stroke / compression / head / block. One more parameter, or two, for number of valves per cylinder and timing control would be useful as well. A lot of engines exist in variations with 2 or 4 valves per cylinder and there are 3, 5 or more valve engines. Timing control would be nice to have so that it is immideately clear what setup a particular engine uses (belt/chain/gear/...) Re-sorted to this: configuration / displacement / valvetrain / valvespercylinder / bore / stroke / compression / timingcontrol / head / block. And if someone could think of something better than 'Combustion' for that catch all section the template would be much better. Ideas, criticism, comments? 2A02:2028:836:6D01:A42D:82B4:E15D:E2BC (talk) 19:28, 16 October 2017 (UTC)


 * Could you maybe make a proposed version (a mock-up) and show it next to the original? That way I would be better able to offer an opinion. Thanks for your effort!  Mr.choppers &#124;   ✎  01:39, 26 October 2017 (UTC)


 * A quick and horrible mock up. See here or take a look at the page history if the bots wipe the page. Not side-by-side with the current Infobox engine. Changes are as follows: Chronology moved to the bottom of the infobox | removed link from RPM range (why was that even there?) | added new field for valves per cylinder linking to Multi-valve | changed order of fields in Layout and Combustion | renamed Exhaust to Emissions | renamed Combustion chamber to Layout 2A04:4540:110A:1501:5834:95F3:19FD:BE80 (talk) 17:34, 26 October 2017 (UTC)


 * Changes have been done to the template. At the moment only minor things have changed. Moved 'Chronology' to the bottom of the infobox, removed the wikilink from 'RPM Range' and instead linked to the articles for idle and redline. Renamed the 'Exhaust' section to 'Emissions' and linked to emissions regulations and equipment, changed 'Combustion chamber' to 'Layout'. Given the lack of reaction by anyone other than Mr. choppers (because words appeared on his talk page) please take a look. Be happy, be indifferent or get angry and revert. But show some reaction and if possible a constructive one. Cheers. 2A04:4540:1100:5501:F421:FDA6:398E:464B (talk) 11:55, 6 November 2017 (UTC)


 * I'd call that much better. One gripe: use of "alloy" for block & heads; I'd suggest "material", instead, since there's a convention to call aluminum "alloy" among some magazine writers. Also, I'm wondering if valvetrain is meant to include number & location of cams, number & location of valves (OHV or flathead), or both; breaking that into two sections might be better.  TREKphiler  any time you're ready, Uhura  16:30, 6 November 2017 (UTC)


 * Alloy wheels bruh! From the context I'd say that the usage of "alloy" is correct in that it refers to "a mix of materials - alloy" and not Aluminium. Engines made from cast-iron for example fit perfectly. At the same time it does get confusing when the engine is made from Aluminium or Magnesium. If a third party could make a suggestion or given opinion that would be great. If you look at my original proposal I had the idea to include number of valves per cylinder. As it stands now there is to much mashed together in Layout and Combustion. At the same time adding another section would make the infobox even longer and possibly more cluttered. Number of camshafts could be debated, location seems a bit to detailed. Perhaps some things should be moved around. I have seen on some articles that the angle of the engine (for example 60° V8) is added to the configuration entry. That makes sense and I'll add it to the template documentation. While writing this I find an issue as to how Fuel system and Management are meant to be used. Wouldn't it be much better for readibility and context to do it a little different? For carbureted engines the management part should be ignored and the entry be formatted with the type and manufacturer of the carb. However for cars with fuel injection saying that the fuel system is "mechanical fuel injection" or "sequential fuel injection" or something something and than saying that the management is "Bosch K-jet" or "GM LS GEN-III ECM" makes more sense. Change the order to management, fuel type, fuel system (oil system, cooling system) would than make it perhaps nice to read. Thanks for the reply. 2A04:4540:1100:5501:F421:FDA6:398E:464B (talk) 16:52, 6 November 2017 (UTC)


 * Looks good but questions I would like to see answered:
 * material of block, heads (main constituent of the alloy? iron / steel / aluminium — I'm no metallurgist)
 * camshaft drive — gears / shaft / chain / belt (any more?)
 * pistons and connecting rods — materials and style
 * number of crankshaft bearings


 * Why so much worry about size of the infobox? Are we not trying to provide information? If the info is not supplied the question gets suppressed doesn't it. Eddaido (talk) 19:47, 6 November 2017 (UTC)


 * Just thinking out loud that at some point having an extremely detailed infobox might become an issue. The infobox for cameras does a great job at providing as many details as possibly, at the same time it is often longer and more detailed than the actual article. There should be some balance. At the same time some (engine or engine related) articles have an almost useless infobox because authors would rather have no duplicate information and thus write the information in prose. There are already fields for block and head material. Only that they say "cylinder head alloy" not "cylinder head material". As to what is better is up for discussion - alloy would be more correct as in that the main constituent (cast-iron etc.) gets mentioned BUT at the same time the usage of "alloy" for "aluminium" could confuse readers. Camshaft drive I had thought about. I can make a mockup, perhaps "timing control" or like you mentioned "camshaft drive" would be good. I don't think adding piston/rod material and design would be helpful. Same for the number of crankshaft bearings, that really doesn't need mentioning in the infobox. 2A04:4540:1100:5501:F421:FDA6:398E:464B (talk) 20:20, 6 November 2017 (UTC)


 * Piston rod design and material would not be helpful, number of crankshaft bearings too, because? Aside from that, who wants to stumble through a lot of usually amateur prose for a few muddled facts. I do know some editors say they like to do that. Why? How do they go with airline timetables? Would they prefer them in narrative form too? Why are you anonymous? Thanks, Eddaido (talk) 23:52, 6 November 2017 (UTC)


 * The infobox template should focus on the slots to be described, not their ranges. It should say "camshaft drive" but not take any part in specifying that this must be "belt" or "chain". There are always going to be exceptions to this (such as shaft drive, or even a coupling rod drive). Andy Dingley (talk) 02:02, 7 November 2017 (UTC)


 * Makes good sense to me. I wanted to show (the editor concerned) why the info would be useful. Eddaido (talk) 02:07, 7 November 2017 (UTC)


 * There are good arguments on both sides for including or omitting the likes of, frex, belt or chain drive for cams: is the infobox a summary, or a detailed description? I tend to think it should hit the highlights, for the uninitiated, & leave the gearhead details for the text body. That being so, "fuel management" (a term I have a problem with) should limit itself to "single carb" (or "single 4bbl), "dual carb" (or "dual 2bbl"), "FI", "EFI", & leave the make & model to the text; cam drive omitted, but number of cams in; valve location in, because it's key to the engine design (OHVs & flattys are very different animals), ditto number of valves; block & head material in (but arguable); piston materials, number of crank bearings, & composition of conrods, & the like is real gearhead detail, better left to the text (or we're going to start asking for the cam spec & grind #, & the valve diameters...)  TREKphiler  any time you're ready, Uhura  08:10, 7 November 2017 (UTC)

Myself I've not always but often found text about engines just embroidery dotted with some confusingly positioned facts. I think the facts should be tabulated. There was a long period when multi-cylinder cars with two or three bearings had very short-lived engines when flexing cranks died (e.g. MGB) and the same when con rods broke and threw pistons through the side. That manufacturers may or do not usually make those mistakes now is not ground for exclusion. Or is it only the 2010s we are recording and the 2020s we are preparing for (which will soon enough be over too)? If there is no content for the slot the slot does not appear. Don't we hope WP will become an accumulation, a repository of useful info not like a printed book with a brief lifetime. Eddaido (talk) 08:49, 7 November 2017 (UTC)


 * There is such a thing as to much information. My understanding of Wikipedia is that the goal is to provide useful information while not trying to provide every little detail. WP is an encyclopedia not a website all about the (subjectively) very interesting design of the VEP3 timing belt that has a 17mm width to reduce friction losses. My understanding of the engine infobox is that it should provide most information a person might need at a glance. There is no way the infobox alone can adequately capture all revelant information and thus shut not be crammed full of it. So tl;dr: Infobox has the quick facts and highlights and the article has the nitty gritty details How would model year changes be reflected in the infobox? Or regional differences like additional equipment to comply with laws & regulations? That is best described in prose. The issue is often that the prose is lacking. If an engine had issues with bearings or any other part of the design that should be mentioned in the article itself. Saying that the camshaft drive is a belt, a chain, a cog or magic would be relevant to the template docmentation, it was not my intention to force that into the infobox directly. 2A04:4540:110A:3D01:5962:3A4D:5FE8:2563 (talk) 09:45, 7 November 2017 (UTC)


 * Yes, there is. Your thoughts are strongly skewed to current design. Have you noticed your need to exaggerate in order to make your point? I rest my case. Eddaido (talk) 09:50, 7 November 2017 (UTC)


 * As someone who writes a lot about older cars, I agree that engine bearings need to be available. This was important (not primary, but at least secondary) information for many decades.  Mr.choppers &#124;   ✎  06:53, 26 November 2017 (UTC)

"History is Bunk!"
But that, as they (WikiProject Automobiles members) say, is history now. Jaguar is bought by an Indian group - but they're still made in England. Bentley is bought by a German group (and Rolls-Royce too) and some of their recent cars are made in England. Volvo has a Chinese owner but, I think, still makes them in Sweden. MG has a Chinese owner but no longer manufactures in England and today an editor has removed the tie to Birmingham.

Can we recognise that Geely and VW and co all just bought brand names and images and accordingly in Wikipedia can we create new articles for the businesses since these new owners took over? So the preceding businesses are history now but in a very short time tomorrow in Wikipedia will be history too.

I plan to Boldly split the articles on these particular businesses and maybe others. Is that OK? Eddaido (talk) 22:41, 24 November 2017 (UTC)
 * I would leave them as-is. The brands often get resold with little different to the manufacturing workers, salesmen and customers. Jaguar was bought by Ford, then resold. But Jaguar was mostly unchanged (apart from using the Ford parts bin for a while). Similar for a lot of the other brands.  Stepho  talk 23:30, 24 November 2017 (UTC)
 * And the other businesses? You may have missed my sharpest point, — MG, but there are others. Eddaido (talk) 23:38, 24 November 2017 (UTC)


 * I definitely think something needs doing. I have puzzled over how to handle this for years. I tried to distinguish between companies and marques. For example, the Rover Company created the Rover (marque) which was subsequently used by British Leyland, Rover Group and MG Rover and is now owned (but not used) by Jaguar Land Rover. The company histories are one thing and the marques are another. Mini is an awkward one too, it has never been a company, only a marque - produced by BMC, BL and Rover Group and now by BMW. Jaguars are no longer produced by Jaguar Cars - it went defunct at the end of 2012 when its business was transferred to Jaguar Land Rover. The same for Land Rover (including Land Rover Range Rover). MG Cars is defunct and MGs were also produced by BL, Rover Group and MG Rover before MG Motor bought the marque (but not the old company). -- DeFacto (talk). 23:44, 24 November 2017 (UTC)


 * My current favourite is a long established English automotive business that admitted an Asian minority shareholder. The minority shareholder insisted on the fitting of a particular Asia sourced component on all production. After twelve months or so all those components failed, recalls were instituted for every vehicle. Manufacturer suffered financial collapse. Minority shareholder picks up the pieces trying not to smile. To protect any innocents no names from me. Eddaido (talk) 23:48, 24 November 2017 (UTC)


 * The principles implied by WP:COMMONNAME are that articles are organized around widely recognized names and the things and events that are understood by normal people as falling under that name. That’s one reason why we omit LLC or GMBH or whatever in article titles, and why Chrysler is the top-level article about everything that is covered under the topic we call Chrysler. Not necessarily the legal entity that has existed for the last few years, but all the stuff that “Chrysler” refers to from a broad, historic, non-recent-centric perspective. The near 100 years of Chrysler events and people and things under that topic, including companies and products that existed before the Chrysler Co. legal entity even existed. Sub-topics like Maxwell automobile or Fiat Chrysler Automobiles happen to have their own articles that fall under the broader topic of Chrysler. This is why we separated the topic Kawasaki motorcycles from the Kawasaki corporate divisions making motorcycles that have had various names and arrangements over the decades. The topic never changes no matter how often the company reorganizes. —Dennis Bratland (talk) 23:47, 24 November 2017 (UTC)


 * Sticking to these principles (in the manner as set out immediately above) would lead to hopeless confusion. A barouche is a particular type of horse-drawn carriage, a kind of grosser Mercedes of its day. Within Wikimedia Commons a number of (geographically remote) people call (ed) their (very rough) wagons with seats fixed on them barouches. Who is Wikipedia to believe about "common names" in this case?


 * I fail to see how a US citizen looking for MG cars would be looking for a Chinese product using old Rover pressings. We need those LLC or GMBH or whatever to settle the confusions and anyway, isn't Chrysler Italian? Or is my history at fault.


 * Doesn't the Search function solve the problems proposed by Denis Bratland? Eddaido (talk) 00:26, 25 November 2017 (UTC)
 * It's right there in Naming conventions (companies). We use (company) if necessary, or Inc. or LLC if we must. The confusion you talk about could be aruged around any any instance of WP:PRIMARYUSAGE, from Water (disambiguation) to Pluto (disambiguation). It's a good system. We don't need to go chasing our tails every time a company gets bought or merged or renamed. The guidelines at WP:PRIMARYTOPIC and WP:COMMONNAME and WP:RECENTISM let us clarify what is what and keep our articles stable, almost always. Sometimes, as in John Smith, we punt. It still works, and we don't need to panic when a company gets bought and the legal entity changes its nationality or name. --Dennis Bratland (talk) 01:56, 25 November 2017 (UTC)
 * I think that's too simple a model for many British examples. Looking at Jaguar again... Jaguar came into existence as a marque of SS Cars Ltd, who also used the SS marque. Should we have one article for SS-badged cars and another for Jaguar-badged or one to cover both? If the latter, what would we cal it? But then SS Cars was renamed to Jaguar Cars so what do we do then? Later Jaguar Cars bought the Daimler Company and used both the Jaguar and Daimler marques on the same cars - what article would they be described in? Jaguar Cars was then bought by Leyland Trucks. Later Leyland Trucks morphed into British Leyland and they merged Jaguar, Rover and Triumph into the Jaguar Rover Triumph division. Later again Jaguar Cars was privatised. Then bought by Ford, then bought by Tata Motors. Recently it was merged with Land Rover to form Jaguar Land Rover. Sure the Jaguar marque has been in continuous use since about 1935, but its history is intertwined and overlaps heavily with that of umpteen other British marques. Perhaps what we should have is one article covering the Jaguar marque from 1935 to date, with sections for the various eras hatted to the appropriate main articles, and then separate articles covering the histories of the various companies encountered during the journey of the marque. The company articles could invoke the various marque articles as appropriate. But where would we document the development of the dual-marqued vehicles such as the Daimler/Jaguar cars? Many other British marques have similarly contorted histories. Think also BL/Rover/MG, Austin, Morris, Riley, Wolseley, Princess, Vanden Plas and Rootes/Chrysler/Peugeot, Hillman, Humber, Singer, Talbot. The article granularity needs very serious consideration. -- DeFacto (talk). 09:57, 25 November 2017 (UTC)
 * I personally think this is a no problem that comes from associating companies and brands to a nationalist agenda in a globalised world. That's one of the reasons I strongly oppose using flags for companies. Volvo Cars is still a Swedish company, JLR is still British not because both keep a pure national identity but because they are registered in Sweden and the UK. Companies can have subsidiaries, and the subsidiaries can be registered in different countries that the parents, simple as that. Most automotive companies have foreign shareholders with significant stakes (as Nissan, PSA or VAG) and we don't consider their nationality has been somehow altered. As for brands, they're still associated with its country of origin except when they expressed otherwise. In consumer electronics, it's already common practice to sell products with a famous name tied to a certain country while the product itself is assembled by a company of different origin (mostly China). Urbanoc (talk) 10:31, 25 November 2017 (UTC)


 * I'm with Dennis on this one. I think it's a problem that just doesn't need solving. Also, consider two recent examples with GM and Chrysler. Someone wanted to rename General Motors to Liquidation Motors Corp.  Well that is the final name of the legal company but the organization, people etc continued as GM Company.  That would mean that someone who wanted to look up Sloan's company would have to find Liquidation Motors. Chrysler has a similar story with DaimlerChrysler and later.  The parent corp has changed but the people and organization have been continuous.  I'm not as sure how to handle something like Bugatti where we have three distinct operations. Springee (talk) 13:00, 25 November 2017 (UTC)


 * Indeed, it's usually not a hard problem. I know that some names are truly ambiguous and you can't have a primary topic. But those cases are rare. I just want to note in the comments above, various editors have used names like Jaguar, Volvo, Bugatti, GM and so on. You were just able to say Volvo or Jaguar and you didn't have to add a bunch of qualifiers: you knew that the rest of us knew what you were referring to with that word. Bingo! That is a primary topic. That is what the title of the article should be. Rather than overthink it, we should follow our instincts and realize that if you can write a sentence like "Jaguar is bought by an Indian group - but they're still made in England" without all of us saying "Jaguar? Which Jaguar?" then Jaguar is a perfectly good article title. --Dennis Bratland (talk) 06:28, 26 November 2017 (UTC)


 * Well put, Dennis. Agreed.  Mr.choppers &#124;   ✎  06:50, 26 November 2017 (UTC)


 * Exactly Dennis, I mostly agree. But today we do not have that, for many British marques at least (look for Daimler, Jaguar, Land Rover, MG, Rover, ...). If you look for such a "Jaguar" article, for instance, you won't find one. The best you will get is Jaguar Cars, named after one of the defunct companies that used to build the cars. It majors on the history of that one company, with sketchy and clumsy references to other purchasers of that company clumsily shoehorned in - so not a concise history of the marque itself. It would be better if named more appropriately ("Jaguar (marque)" or similar) and if it gave a complete overview of the history of just the marque through its different eras, and not sidetracking into the specific company's history, acquisitions, takeovers, etc. It should link to more specific articles for the specific company details and histories. And that is, I think (he'll correct if I misunderstood him), what was imagining too. -- DeFacto (talk). 10:10, 26 November 2017 (UTC)
 * It should be Jaguar cars, lowercase c, about the topic of all Jaguar cars. Or use Jaguar automobile if you prefer. Swallow Sidecar, Jaguar Cars, Jaguar Land Rover and so on are sub-topics of Jaguar cars, just as Bantam or Kaiser-Willys are sub-topic or related articles to the topic of Jeep. As I've said, this isn't unique to cars. Most products that have been around for decades have had many owners and rebrandings. If I wanted to know all about Jaguar, Id' want to start with Jaguar cars (lowercase) because I'd want an overview of all of it. The primary topic is where you start. --Dennis Bratland (talk) 20:53, 26 November 2017 (UTC)

Note: a similar discussion is also taking place at: Talk:Mini (BMW). -- DeFacto (talk). 20:54, 26 November 2017 (UTC)

Calling Kookie Burns
User:Locationshooter has now uploaded this picture twice to T-bucket. I've rv'd twice, because the actual car is barely visible, & because there's an embedded copyright notice on the photo. The info page for the image claims this is an original, but this user has, apparently, already had an allegedly "original" work removed, & on that basis, I doubt it. So...if anybody cares to weigh in with stronger action than I can take, feel free. TREKphiler any time you're ready, Uhura  17:23, 26 November 2017 (UTC) (BTW, if it's a copyvio, take it down from here, too!)


 * I think this is a completely useless image for encyclopedia. Cheers - CZmarlin (talk) 01:04, 28 November 2017 (UTC)


 * It's one of those illusion images. If you stare at it for about 5 minutes you'll eventually see a car in the background. Might be appropriate for an article on denim shorts or possible an article on sexy backsides but its useless for a car article. It also says copyright 2010 West-World Photograph, so no-go from the get-go.  Stepho  talk 10:58, 28 November 2017 (UTC)
 * ♠It reminds me a little of the scene in "Night Moves" where Melanie's taking her top off. There is a truck in the BG, but unless you've seen the film a fair number of times, chances are, you never noticed...never mind what it says on the truck's door.
 * ♠Needless to say, I'm in complete agreement with the above-expressed sentiments.  TREKphiler  any time you're ready, Uhura  18:30, 29 November 2017 (UTC)

Year in motoring articles
Hi all! In the backlog of articles with no sources are a number of articles of the form "#### in motoring":
 * 1981 in motoring
 * 1982 in motoring
 * 1983 in motoring
 * 1984 in motoring
 * 1985 in motoring
 * 1986 in motoring
 * 1987 in motoring
 * 1988 in motoring
 * 1989 in motoring
 * 1990 in motoring

Just from quickly spot-checking a few of them, I think they all have several paragraphs of text but no sources. That said, they all appear to have info that could be sourced fairly easily. So my question (since I have no knowledge of anything automotive) is do the people here thinkt hese are useful articles to source and maintain? Or should we consider merging the info in them elsewhere, or nominating them for deletion as unencyclopedic? Any thoughts are much appreciated! Thanks and happy editing! Ajpolino (talk) 18:00, 27 November 2017 (UTC)


 * Hello Ajpolino, You are not alone on noting that these articles are lacking in many respects. They have a sketchy and narrow perspective - without any context - of a random selection of new car introductions. This type of information already seems to exist in the Timeline of motor vehicle brands. Moreover, I think the titles are misleading because "motoring" typically refers to "traveling in a car, especially when considered as a recreation" (See Dictionary) and not to a list of automakers and their cars. Nevertheless, there was a discussion about deleting these articles and several contributors claimed that they could easily expanded and improved. Apparently none have bothered to do so for almost one year. Cheers! - CZmarlin (talk) 01:01, 28 November 2017 (UTC)


 * Ah, I assume you mean here. I hadn't seen that before since the name is hard to search. If you want to merge those articles somewhere or engage in some kind of cleanup, ping me and I'm happy to help. Cheers. Ajpolino (talk) 19:10, 29 November 2017 (UTC)

Bunk, Cruft and The Earls Court Motor Shows
When the British automotive industry sent vehicles all over the world much as the Japanese do now they, as The Society of Motor Manufacturers and Traders, held an annual jamboree / show at Earls Court which captured front page news headlines and was opened by Royalty. It was important to the nation. That seemed to end with the 1960s and then there were the industry's terminal disasters of the 1970s

The show was the occasion of the industry’s report of the last 12 months as they experienced it and the chair’s opening speech was all about that and I have added notes of these comments to the article.

Another member of this project has quite incorrectly described these notes as ‘cruft’ and deleted 9,500 bytes of them. To my mind this is quite wrong.

Would members like to look at the article both before and after Trekphiler’s amendments and make their own comments on the talk page about this disagreement.

Please, Eddaido (talk) 03:51, 3 December 2017 (UTC)

Disambiguation links on pages tagged by this wikiproject
Wikipedia has many thousands of wikilinks which point to disambiguation pages. It would be useful to readers if these links directed them to the specific pages of interest, rather than making them search through a list. Members of WikiProject Disambiguation have been working on this and the total number is now below 20,000 for the first time. Some of these links require specialist knowledge of the topics concerned and therefore it would be great if you could help in your area of expertise.

A list of the relevant links on pages which fall within the remit of this wikiproject can be found at http://69.142.160.183/~dispenser/cgi-bin/topic_points.py?banner=WikiProject_Automobiles

Please take a few minutes to help make these more useful to our readers.&mdash; Rod talk 13:17, 3 December 2017 (UTC)

Relevance of modern crash tests for older cars
A number of (probably related) IP editors have been removing/altering crash test results from articles about old Russian cars, such as Lada Riva, Lada Samara, UAZ Simbir on the grounds that they are 'unnecessary for an old model (which is older than the test itself)'. I'd like to have some extra feedback on whether there is some sort of consensus on the matter. Thanks!--eh bien mon prince (talk) 13:25, 20 December 2017 (UTC)
 * This is hard question, because those old models surely have bad results, they are not for sale in most countries anymore. Not sure if its necessary to have data which is valid only for some countries -- >Typ932 T&middot;C 17:34, 20 December 2017 (UTC)
 * As an IP editor who removed the data, I'd like to point out that modern-day car safety assessment programmes were introduced and became necessary for car manufacturers only in the 1990s (Euro NCAP was formed in November 1996), hence it is self-evident that older cars designed decades before these tests cannot meet modern safety standards. They might have been crash tested in a different manner and considered as safe before, in their best years, but since then car safety standards, technologies, regulations, and tests have changed drastically. In my opinion, it is absurd and unnecessary to edit articles about vintage cars, adding everywhere that, say, "in 2012 a 1960s VW Beetle failed to pass a test introduced in 2001", as such an old car is obviously outdated in terms of safety, much older than the test itself, and there is no way it can have a better result and compete with newer cars. Also, the edits I removed made no mention that the test is a modern one, introduced only in 2001, while the cars are not. I tried to improve that, but the opposing user reverted my edits as WP:SYN. Lastly, I've got to say that all the aforementioned crash tests were introduced and conducted by only one private magazine, according to its own programme. 90.155.195.3 (talk) 21:31, 20 December 2017 (UTC)
 * If Wikipedia were a shopping guide then we would only want to include relevant contemporary shoppers advice and not distract car buyers with anachronistic tests. But it’s not. An encyclopedia is about giving broad insight and allowing readers to see context. A modern crash test on an old car is an excellent way to give today’s readers a way to relate to the past. We convert foreign currencies and correct money values for inflation for the same reasons. Dennis Bratland (talk) 22:10, 20 December 2017 (UTC)
 * It's worth mentioning that many of those cars are old in design only. The Lada Riva was the best selling car model in Russia as recently as 2008 (the ARCAP test is from 2001). Tens of thousands of Lada 4x4 are still sold today across a number of countries.--eh bien mon prince (talk) 23:11, 20 December 2017 (UTC)
 * Actually, if you check the source you have cited, you'll see that it says virtually nothing about the Riva. And of course it wasn't the best-selling car model in Russia in 2008. 90.155.195.3 (talk) 23:42, 20 December 2017 (UTC)
 * If you check the source and bother to select the right year, you'll find that it was.--eh bien mon prince (talk) 23:51, 20 December 2017 (UTC)
 * It doesn't work properly in my browser for some reason, but I've seen your screenshot. 90.155.195.3 (talk) 01:10, 21 December 2017 (UTC)

Looking at this, I'm not seeing how it violates SYN; I see no conclusions being drawn. As for irrelevance, the cars are still on the road & still in production, so the fact they can't pass modern crash tests is germane (if not exactly fair). TREKphiler any time you're ready, Uhura  22:00 & 22:01, 21 December 2017 (UTC)
 * If a reliable source did a modern crash test on the Patent-Motorwagen I'd love to see it in the article Benz Patent-Motorwagen. We aren't selling cars here. It's irrelevant whether or not it's on the market or in production because we aren't influenced by whether readers are making buying decisions or are deciding if they should ride in this car or that car. We're not giving advice or guiding people's decision. We're only trying to help people understand things, and that means all things from the beginning of time. It's terrible how many articles are framed with the needs of the contemporary consumer in mind. --Dennis Bratland (talk) 00:18, 22 December 2017 (UTC)

Carsalesbase.com and detailed list of Volvo Cars sales
Hi! There's a discussion at Talk:Volvo Cars about carsalesbase.com as a source and about the section Volvo Cars. Input from editors with experience of editing car-related articles would be appreciated. Sjö (talk) 06:36, 2 January 2018 (UTC)

Three door and five door
User:Dogs.barking.duster.rolling has been changing the body style attribute in the infoboxes of vehicles with hatches connected to the interior of cars from two or four door to three door and five door, counting the hatch as a door. I am not particularly in favor of this, in my mind a door is a opening intended for the entry and egress of passengers, if we count all openings that a passenger might be able to fit through as doors irregardless of car type as with the 350Z it would seem that one should call the Corvette McLaren 570GT three doors as well, there also seems to be possibility for confusion when it comes to vehicles like the Hyundai Veloster with three proper doors and a hatch, should it be described as a four door? In my opinion this should be reserved for conventional hatchbacks if it's to be used at all, but I would like some other views on this. Toasted Meter (talk) 02:14, 2 January 2018 (UTC)


 * I believe it depends a lot on the area. In the US, hatches generally aren't seen as doors but in Europe (and possible Asia?) they are. In my opinion a hatch is simply a door in the back of the car. I don't think it's a door/hatch if only the window opens (the way it is most Corvettes I believe), then it's just a window. It's an interesting topic and I think we need more opinions on this. There doesn't seem to be a general approach to this in Wikipedia as some hatch-equipped coupes are classified as three-doors and some as two-doors, probably depending on who wrote it. — Preceding unsigned comment added by Dogs.barking.duster.rolling (talk • contribs) 11:25, 2 January 2018 (UTC)


 * We had this discussion a few years back and the consensus was that the rear door of hatchbacks, liftbacks, wagons and similar counts as a door. Too sleepy to dig it up from the archives right now. The current consensus is written up at as 'Note: station wagons, hatchbacks, etc, are given an extra door to signify their larger rear openings compared to coupés and sedans, etc.' Of course, consensus can change but the changes to the articles should wait until after the discussion.  Stepho  talk  15:53, 2 January 2018 (UTC)


 * Is this Wikipedia talk:WikiProject Automobiles/Archive 18 it? Under that rule the 350Z seams to not fit as a wagon or hatchback and should be described as a 2 door, is that right? Toasted Meter (talk) 04:44, 3 January 2018 (UTC)


 * Yep, that's the correct archive. The 350Z is a liftback (in spite of Nissan calling it a coupe) and I would count liftback doors the same as hatchback doors, in this case, 3-door. The same would apply for my own Toyota AE86, even though I have only entered through the rear hatch a couple of times when shifting heavy items.  Stepho  talk 09:40, 4 January 2018 (UTC)

General Motors
Need some help over at General Motors. Have and editor that has tagged the article with a neutral point of view tag....but I am not sure what the concern is. All they have metioned is they would like to see death rates and I think they are saying the article reads like an add. I will research the death rates....but not sure about the add thing as the article looks like other big 5 car pages.--Moxy (talk) 03:52, 8 January 2018 (UTC)
 * The ignition switch recall and death toll are both mentioned at the bottom with a link to a more detailed page. I think that's perfectly fine for the matter.  Sounds like the editor has an axe to grind with GM (and they're not the first). --Vossanova o&lt; 20:23, 8 January 2018 (UTC)

Share certificates
A collector of some kind is adding images of old share certificates to articles about members of the industry. Has been doing so for some time. In this particular case see Gordon England (coachbuilder) and France's Austin Seven. There are very many more.

Is this a good thing or cruft? If cruft deprecate or delete on sight? Eddaido (talk) 12:10, 8 January 2018 (UTC)
 * Gordon England (coachbuilder) is an odd one. The article leads with a badge, then a stock certificate, then a picture of a building. Then down at the bottom possibly as an afterthought, the company's actual products. The images are fine, but I'd reverse those priorities. I don't think the stock certificates are cruft, but they should have a low priority. When you have layout problems or too little text to support all the images then you'd want to remove low-priority images. For example, in Minerva (automobile), adding the image exacerbates a MOS:SANDWICHING problem (though sandwiching was already there). Maybe if an article has a gallery at the bottom, the stock thing could go there, but in general we'd want to see images that tell us something distinct about a company. If the stock certificate supports actual article content, then it has more value. We don't need to go out of our way to delete all of these additions, but any that are causing issues should be removed or moved down. --Dennis Bratland (talk) 18:37, 8 January 2018 (UTC)
 * So that's just a deprecate? They will always have the legal name of the company concerned on them but after that . . ., for example, what more do we learn from them of Minerva, or of Gordon England's business? Zero. Eddaido (talk) 21:10, 8 January 2018 (UTC)

Rolls-Royce
Rolls-Royce is divided into a complicated set of articles based on its various corporate entities, which lacks a coherent overall history of the company. The Automotive portion is split between Rolls-Royce Limited (1904-1973), Rolls-Royce Motors (1973-1998), Rolls-Royce Motors (1998-Present) and List of Rolls-Royce motor cars (1904-present).

Would it make sense to consolidate Rolls-Royce's history as an automotive brand under one article, similar to the way Lotus and Chrysler are organized? Is this something that members of this project would be interested in tackling or weighing in on? –dlthewave ☎ 22:24, 9 January 2018 (UTC)


 * Those are company history articles, so it's reasonable to split them. So long as we have List of Rolls-Royce motor cars as a complete list, then we're good.
 * Timeline of Rolls-Royce would be a good topic, if anyone fancies it, as would Timeline of UK aircraft industry (needs to be UK scope, not just GB). Andy Dingley (talk) 12:46, 14 January 2018 (UTC)

Bandini deletions
User:TenPoundHammer has redirected all Bandini automodel pages (example  Bandini 1100 (1946)  )to main page of Bandini Automobili. What you think? should we restore those pages, there is huge amount of work now "deleted", he hasnt even consulted this group in any way before making such big changes -- >Typ932 T&middot;C 09:45, 13 January 2018 (UTC)


 * The various entries in question have been attracting readers.  Even if they had not, being uninteresting to one individual contributor who's having a bad day is not a sufficient reason for deleting entries in this way.   That is the route to a withered scope that directly defies the eye-watering ambitions of wikipedia's founders.   The issue in this particular case is not the introduction of "redirects" but the fact that it has been done in order to cloak a series of deletions.   The failure to discuss or explain is a bizarre discourtesy.   The entries need to be reinstated.   But once reinstated they also badly need (like  95% of the entries on wikipedia) to be improved.    Regards Charles01 (talk) 10:12, 13 January 2018 (UTC)


 * OK, Bandini is probably not ther best known make but that is no reason why the models should not have their own pages. There is a lot of useful content that has been hidden and they should be reinstated. I have put an objection in to the Speedy Delete of the Category page for Bandini vehicles. Malcolma (talk) 11:15, 13 January 2018 (UTC)


 * Looks like a lot of the material came from the Italian Wikipedia entries. Problem both there and here must be the lack of any sources for the content. Anybody care to add some? Mighty Antar (talk) 12:53, 13 January 2018 (UTC)


 * Bulk revert, discuss, and ANI. Tired of this guy, and this is a regular problem from him. Andy Dingley (talk) 13:02, 13 January 2018 (UTC)
 * This: Categories_for_discussion/Log/2018_January_13 is egregious. Andy Dingley (talk) 13:05, 13 January 2018 (UTC)
 * Also Templates_for_discussion/Log/2018_January_13 Andy Dingley (talk) 14:21, 13 January 2018 (UTC)
 * Redirection of 15+ articles on related topics in a short space of time, without prior discussion, is not how we are supposed to do things. Agreed, it's not the best-known manufacturer, and some of the articles may need work on sourcing, style etc. and some may genuinely not be 'notable' enough, but a blanket removal does not seem like an overall improvement. Eagleash (talk) 13:08, 13 January 2018 (UTC)


 * Also this "11:54, 13 January 2018 RHaworth (talk | contribs) deleted page Category:Bandini vehicles (G6: empty)" at Category:Bandini vehicles is just more entirely predictable bloody awful bad admining, from someone who shouldn't have a mop. Here's a clue, because it might be stating the obvious, but evidently they're not aware of it: empty categories don't just magically appear. Much of the time it's because they've just been emptied deliberately and wrongly, and that (maybe another surprise here?) is that isn't a good reason for speedy deletion. Andy Dingley (talk) 13:12, 13 January 2018 (UTC)


 * Wikipedia_talk:Criteria_for_speedy_deletion Andy Dingley (talk) 14:20, 13 January 2018 (UTC)


 * Agree with Eagleash. The material looks like it is probably notable.  There doesn't seem to be any indication that editors involved with the articles were notified nor was the material retained when the articles were redirected.  The articles should be restored then dealt with on a case by case basis.  Springee (talk) 17:50, 13 January 2018 (UTC)


 * I redirected them all because they were all full of overly technical garbage and clearly hadn't been edited at all in over 10 years. I felt that if they were notable on their own, then WP:TNT was the only option. No article should be sitting cold and unedited that long. If you want to unfuck the articles, go for it. My main concern was eliminating rampant misuse of Cleanup, an effectively meaningless maintenance tag from the olden days. Ten Pound Hammer • (What did I screw up now?) 19:23, 13 January 2018 (UTC)
 * This is bad behavior. Is it badly sourced? Yes. Is it badly written? Yes. Does it deserve keeping? Yes. SCCA wins confer notability, even if you happen not to be a fan of amateur sports car racing (& I'm not).  TREKphiler  any time you're ready, Uhura  20:10, 13 January 2018 (UTC)
 * The articles were so badly written, though, that I didn't see anything that was worth keeping. Ten Pound Hammer • (What did I screw up now?) 21:17, 13 January 2018 (UTC)
 * The articles were poorly translated from Italian and at least some of the material originates from the Bandini Register. I wasn't aware the olden days had ended or that unedited articles had a use by date! perhaps replacing Cleanup with Cleanup rewrite} or technical would have been a more constructive option. Mighty Antar (talk) 22:13, 13 January 2018 (UTC)
 * This is a whisker away from ANI as it is. Don't push it. Andy Dingley (talk) 22:15, 13 January 2018 (UTC)
 * Now all articles are marked as too technical. I think they arent too much different than any other car article, if there is too techinical stuff, they are linked to other articles which explains things. Those articles just need references and some cleaning and language editing -- >Typ932 T&middot;C 14:04, 14 January 2018 (UTC)
 * There is nothing technical in any of these articles, beyond the level of something Jeremy Clarkson could understand. Andy Dingley (talk) 14:13, 14 January 2018 (UTC)
 * Complaining that these articles needed work, or even that they were too technically complicated, would have been a valid complaint. What's not acceptable (and is a behavioural problem, not a content problem) is to bulk-blank 18 articles in 5 minutes (so no actual review of each) with descriptions of "not notable", "all technical garbage", "redundant and all technical crap" and "unsourced fanwank". Then to make an invalid WP:CSD on the resultant empty category (this category is never appropriate for G6), when that category wasn't even valid for WP:CSD until 7 days had elapsed. This delay isn't there to slow down Hammer's essential cleanup work, but to give other editors an opportunity to disagree - something which he clearly gives no weight to. See Articles for deletion/History of Oldham Athletic A.F.C. (and many other current deletions) too. These deletions are as much an attack on other editors as they are about articles. This is not acceptable. Andy Dingley (talk) 14:29, 14 January 2018 (UTC)


 * Thus: Information icon4.svg There is currently a discussion at Administrators' noticeboard/Incidents regarding an issue with which you may have been involved. The thread is Ongoing trolling by TenPoundHammer. Andy Dingley (talk)

Road cars in Template:McLaren
An editor has questioned whether road cars should be included in Template:McLaren. Interested editors are invited to participate in the existing discussion. Thanks. DH85868993 (talk) 09:50, 18 January 2018 (UTC)

Verb tenses for out-of-production models
Does the project have a recommended way of describing out-of-production models in the lead sentence, specifically with respect to verb tenses? I have generally been using the format "[Model Foo] is a [car type] that was produced by [manufacturer] between [date 1] and [date 2]", as this recognises that the model is no longer produced, but examples are still in existence. However, I have encountered at least one other approach recently, and wondered if this has been discussed before? PaleCloudedWhite (talk) 09:33, 30 December 2017 (UTC)
 * I have seen, or participated in, at least two or three previous discussions about this. And, quite a long time back I raised a similar question via the teahouse ('is' vs 'was') and something 'like' the method noted above was felt to be the best way. Eagleash (talk) 10:54, 30 December 2017 (UTC)
 * Not the same, but similar: MOS:TVNOW recommends that format for old TV shows since the show still exists (e.g. "The Afternoon Show is a British talk show which was broadcast by Channel 1 between 2008 and 2011. The program was hosted by Susan Jones and John Smith and recorded in London..."). Sjö (talk) 10:48, 18 January 2018 (UTC)
 * I don't remember if it's been discussed here before, but I always change to "is" if I come across a "was" - if I know they still are. -- DeFacto (talk). 18:48, 18 January 2018 (UTC)

Rfc on reference date format at 'Tesla Model S'
I have started an RFC at Talk:Tesla Model S about whether an article using MDY date format in the text is allowed to have yyyy-mm-dd date format in references or not. There was also discussion in the talk topic just above it at Talk:Tesla Model S. Please answer there, not here.  Stepho  talk 05:02, 28 January 2018 (UTC)

Allard
This article about a small business has very little in the way of citations. In recent months more has been added about recent events. How can these contributors be persuaded to provide the kind of confidence in their accuracy that we need? Eddaido (talk) 20:17, 27 January 2018 (UTC)


 * That article is a mess. I wonder if  knows anything about them.  He took Sunbeam Tiger to FA (with a little assistence from me) and Allard is comparing itself to them, putting Ford V8s (flatheads) into light frames like the Tiger.  Living in the UK, he might have better access to any library material regarding it.  Dennis Brown - 2&cent; 01:35, 28 January 2018 (UTC)


 * Don't be coy Dennis, with a lot of assistance from you. I've done a little bit of work on the Allard Clipper, which fascinated me because it's such an ugly car, and I'm slowly going through and adding articles about other almost forgotten cars, such as the DRK. I can certainly take a look through what material I've got on Allard, and what I can get hold of. Eric   Corbett  01:50, 28 January 2018 (UTC)


 * Thank you, on both counts. Something said that this was your kind of article, and if anyone could bump it up a notch or two, you could.  Actually, it seems quite interesting, and I look forward to reading more information about it.  Seems he was a bit of a pioneer, although not financially successful.  Dennis Brown - 2&cent; 02:10, 28 January 2018 (UTC)
 * Yeah, you think its messy. Why I wrote, what I want to know is, how to persuade a recent / current contributor with apparently sound knowledge about the business to give everyone confidence in these new contributions. I believe they are all very good. Eddaido (talk) 02:15, 28 January 2018 (UTC)


 * Information that feels wrong and can't be verified via a reference can be deleted. Information that feels right but can't be verified by a reference should have reference tags added (eg, , ). From my very scant knowledge of Allard, the information seems pretty much correct, so tags are the short term answer. Long term is of course to encourage editors to add references but that's more social engineering rather than applying rules.  Stepho  talk 02:18, 28 January 2018 (UTC)


 * OK then, I'm asking about social engineering. All you people may be unaware but because I deal in old stuff I often find children / grandchildren of the businesses and particular fanciers adding info. I can force them by reverting but it is very rude and crude. Most of you editors are "social engineers", some rougher than others. Please pull out some expertise on dealing to other editors. Eddaido (talk) 02:22, 28 January 2018 (UTC)


 * What will convince future editors to contribute in a more helpful way is to clean it up, cite it, and bring it up to standards. A clean article encourages clean additions.  This is why I asked Eric to help.  I've worked with him on two unique GAs and one FA relating to automotive topics, and I would like to take a stab at jumping the quality up.  Articles like this get few additions because there are few sources.  They didn't exist very long.  The topic is interesting enough that it does deserve some serious attention. It will all boil down to what the library in Manchester, UK and my library in NC, USA have to offer.  I don't expect to find much WP:RS on the web for this.  Dennis Brown - 2&cent; 02:30, 28 January 2018 (UTC)
 * Dennis, I am talking of contributors in very recent days not some bright light, a Nirvana away in the future! How do I explain better? Eric won't have that info. Eddaido (talk) 02:32, 28 January 2018 (UTC)
 * You asked for help, two people who are experienced at providing sources for difficult auto subjects have volunteered. Maybe just wait and see.  Dennis Brown - 2&cent; 02:43, 28 January 2018 (UTC)
 * True, I did ask for help. I didn't expect the question to be completely ignored or is that the kind of "social engineering" I mention above. Very Unhappy Eddaido (talk) 02:46, 28 January 2018 (UTC)
 * I'm unhappy too. The Allard story is more complicated than the article suggests, but you don't seem to be interested in that, just about some social engineering experiment. Stuff that for a game of soldiers as we say "oop north", I've got lots of other things to attend to. Eric   Corbett  03:05, 28 January 2018 (UTC)
 * I've left a polite request for more sources on 's talk page. I assume he is the main editor you are talking about.  Stepho  talk 03:01, 28 January 2018 (UTC)
 * I don't remember. I got to Allard because a few days ago I found this page and emailed User:Mason Loades on 22 January without success. There are a mistake and some more precise ids required on the pictures he uploaded. One of the pictures clearly a Healey he has labelled an Allard. I suspect that these people tend to leave their contributions half expecting them to be wiped off just anxious that Dad / Grandad gets fair treatment by 'history'. Thanks for leaving that message but the lack of response on these occasions unless I simply revert the edits (and that doesn't necessarily work) same with leaving signs about refimprove cite needed etc. Maybe your keyboard has the magic touch. Regards, Eddaido (talk) 03:25, 28 January 2018 (UTC)


 * You asked how to pursued editors in the future to cite better. That isn't exactly possible, except (again) by improving the article to the point that it encourages better quality additions, and encourages stewardship by experienced editors.  There is no magic answer on how to get future people to cite better. Dennis Brown - 2&cent; 03:09, 28 January 2018 (UTC)

FWIW, this discussion attracted my attention, & I hope the reorganization isn't out of bounds... TREKphiler any time you're ready, Uhura  21:29, 29 January 2018 (UTC)
 * No Dennis, I did not. Please read again. Eddaido (talk) 03:27, 28 January 2018 (UTC)
 * How can these contributors be persuaded to provide the kind of confidence in their accuracy that we need?" and "how to persuade a recent / current contributor with apparently sound knowledge about the business to give everyone confidence in these new contributions." Then you might want to ask more clearly because that sounds like you want more citations, more proof, more "confidence in their accuracy". I don't get your attitude here. Dennis Brown - 2&cent; 12:07, 28 January 2018 (UTC)
 * Others did. Eddaido (talk) 17:28, 28 January 2018 (UTC)
 * Bold is always good, any disagreement can be handled on the article talk page. I'm trying to dig up some sources before I start in, and work keeps getting in the way. Dennis Brown - 2&cent; 21:51, 29 January 2018 (UTC)

Article merge
I've listed these four articles Panel van, Panel van (Australia), Panel truck and Sedan delivery for a possible merge with the discussion taking place here for any interested editors. Shinerunner (talk) 20:26, 11 February 2018 (UTC)

Move discussion in progress
A move discussion which may be of interest to participants of this WikiProject is currently taking place at Talk:Corvette (disambiguation). Dohn joe (talk) 18:13, 13 February 2018 (UTC)

Audi Motor Assembly
I am currently working through de:WP articles created by the (in Germany) banned author TheAutoJunkie who wrote a lot of nonsense in German Wikipedia. Some hoaxes have already been deleted. Now it is time for Audi Motor Assembly. With the exception of the German and the English Wikipedia articles (both written by TheAutoJunkie) I cannot see any evidence that there ever has been such a company. There is and was distribution of Audi models in Japan, but more? There are several possibilities: Is there somebody who can help? Thanks in advance. --Roxedl (talk) 12:00, 12 February 2018 (UTC)
 * the article is a hoax
 * the article is highly exaggerated, e.g. maybe much less cars have been produced and/or by other partners
 * the name is faulty (and is in Japanese)
 * With respect, most of the text in this article concerns things alleged to have taken place in Japan, so surely the place to ask is on Japanese Wikipedia?  Plan B - is there anyone reading this who is able to read and write in Japanese?   Success  Charles01 (talk) 12:29, 12 February 2018 (UTC)
 * If there was some way for anyone not speaking Japanese to navigate through jp:WP, surely. On the other hand side I assume the English community is really versed in Automobile history (and not interested in nesting a hoax) … however, the same questions have already been raised in the Japan portal of the German Wikipedia. --Roxedl (talk) 12:58, 12 February 2018 (UTC)
 * A (very) quick Google reveals virtually nothing. There is a very similar article at Wikia here. One is likely copied from the other or written by the same disingenuous editor. The supposed 'official website' in the Wikipedia page seems to be just an advert for current finance deals, even having the date Monday 12 February. I have removed it. Overall I think it is at best 'inaccurate'. Eagleash (talk) 13:44, 12 February 2018 (UTC)


 * The article is a pretty blatant hoax in my view, and I've nominated it for a speedy deletion as such. To take just one point, there is no VW/AUDI assembly plant with a VIN code of 9. Eric   Corbett  14:47, 12 February 2018 (UTC)


 * Good catch! I removed few mentions of AMA which TheAutoJunkie had added to other articles.
 * Interestingly, a similar entry was added to List of Volkswagen Group factories by an IP user in 2009. It refers to a joint venture between Volkswagen and Toyota/Hino which produced the Volkswagen Taro and does not appear to be a hoax, but production took place in Germany, not Tokyo. Another user changed it to AMA in 2014. –dlthewave ☎ 22:27, 12 February 2018 (UTC)

Thanks for your speedy reaction. The article in the German WP will be sppedy-deleted soon, too. You should consider to ban the author User:TheAutoJunkie (he is banned in German WP), only to avoid any kind of re-activation here. His last edits in the en:WP date from 2014). Pls also have a look a the articles he created or edited. This user created some hoaxes in Germany, and much false information (see DiVolvo - already corrected - or Cooper Motor Corporation, not yet corrected). --Roxedl (talk) 07:12, 14 February 2018 (UTC)

Tokyo Trading
A suspected hoax again, this is the Bloomberg entry. Unfortunately no VIN number hint this time. Anybody can help? --Roxedl (talk) 10:44, 20 February 2018 (UTC)
 * I removed the external link, which was a ransomware "Microsoft Alert" page, after being redirected. Dennis Brown - 2&cent; 11:50, 20 February 2018 (UTC)


 * It's another hoax. There is a VIN clue, as the article says that Tokyo Trading has its own VIN assembly code, but it doesn't. Tokyo Trading doesn't appear in the list of Japanese WIM codes. Also, the car pictured in the lead was produced by Toyota Motor Corporation, not Tokyo Trading. Do I need to CSD this Dennis, or can you just get rid of it now? Eric   Corbett  11:56, 20 February 2018 (UTC)

Thanks. In the meantime the German article has been speedy deleted. --Roxedl (talk) 12:04, 20 February 2018 (UTC)
 * Deleted. Thanks for the heads up and supporting info, both of you. Dennis Brown - 2&cent; 14:46, 20 February 2018 (UTC)

Baijah Automotive
This article is a translation of an article of the German WP (same author as above for Audi Motor Assembly and Tokyo Trading), but the article there has been deleted about nine years ago. Iwas not involved in this deletion and so I caanot give more details, but you can be rather sure that if there had been really an assembly process, it would not have been deleted. Surely not a case for speedy deletion, but a deletion to consider. --Roxedl (talk) 20:01, 22 February 2018 (UTC)

Requested move for Rolls-Royce Wraith (2013)
Hello Project Automobiles,

this requested move (intiated by me) would benefit from your input. Artix Kreiger (talk) 19:23, 23 February 2018 (UTC)

Please put me right if I have it wrong but there has only been one model of Rolls-Royce named Rolls-Royce Wraith - this particular model. Eddaido (talk) 20:13, 23 February 2018 (UTC)

, Rolls-Royce Wraith (1938). Artix Kreiger (talk) 20:22, 23 February 2018 (UTC)

Pickup vs utility... again
A while back we had a discussion about pickup vs utilities []. It seems the anonymous IP editor is back. If this keeps up I'm going to seek page protection (verified users only) for the articles in question. Springee (talk) 04:44, 2 March 2018 (UTC)
 * 1.127.110.53
 * 202.94.72.250
 * 49.196.173.2
 * 1.126.111.2


 * The 202.94.72.250 address is for Fortescue Metals Group Ltd in Perth (the previous troll was also from my home town of Perth). The other addresses are from the big Australian ISP's and could be from anywhere in Australian (including Perth). I say just slap that protection on straight away. Give 'em inch and they'll take a mile.  Stepho  talk 11:49, 2 March 2018 (UTC)

Electric cars
Hello, the article Electric car did not mention fuel cell vehicles at all. I added a short text on the introduction, but the rest of the article describes exclusively battery electric cars. Can you help to fix this? --NaBUru38 (talk) 18:51, 7 March 2018 (UTC)

What is Turismo Internacional?
Can anyone identify what Turismo Internacional is? I'm trying to find out if Sandra Villarruel belongs on List of female racing drivers and what level of racing this is, and what the "Dos" (Ford Fiesta) class is. I can't tell if it's a track day thing or a club-level race or a branch of an international racing series. Villarruel is an actress and the Spanish-language sources make it sound liek she was racing in a reality show competition, but I could be totally off base. --Dennis Bratland (talk) 20:38, 1 March 2018 (UTC)
 * I think I figured it out. Is it Turismo Carretera in the Top Race Series? --Dennis Bratland (talk) 22:42, 1 March 2018 (UTC)
 * Looking at the website, it seems to be club racing. The cars seem to be of the same performance as Turismo Nacional, which seats below Super TC 2000, Turismo Carretera or Top Race V6. So, it's sort of like NASA racing using cars that race in the Pirelli World Challenge TC/TCA classes. --Pc13 (talk) 23:12, 2 March 2018 (UTC)
 * Hello, the Turismo International is a regional championship, mainly held at Buenos Aires and La Plata. It lacks the prestige of the TC, STC2000 and Top Race V6. --NaBUru38 (talk) 18:55, 7 March 2018 (UTC)

Infobox
See here Template_talk:Infobox_automobile  and give opinions     -- >Typ932 T&middot;C 19:14, 10 March 2018 (UTC)
 * Since this section has been posted ONE person has given an opinion. Sammy D III (talk) 11:40, 17 March 2018 (UTC)

Production car
For those interested, there is a proposal to change the rules around the list of fastest production cars at Talk:Production car speed record. There is considerable background discussion on the talk page that has led to the proposed change. In essence the change drops the number of vehicles required and replaces it, for post 1980's, with manufacturers having a WMI number. NealeFamily (talk) 00:57, 24 March 2018 (UTC)