Wikipedia talk:WikiProject Chemistry/Archive 36

Template:Mixbox
I'm creating a draft for various mixbox sub-templates, which can substitute the equivalent chembox sub-templates. Since I'm adding new fields, how do we decide in what order they (fields) are to be listed in? I'm currently working on template:Mixbox Identifiers. Plasmic Physics (talk) 01:00, 27 April 2015 (UTC)
 * Mix? What mix?  Are you suddenly into music or snacks (but then why post it here?).
 * Anyways, what is the proposed content of this template? I think that is an important question to answer before we define what we .. need to identify there.  And then, do we actually want a box for that (if my presumption that you are actually talking about a mixturebox template, then my answer is likely: "I oppose creating a template for that").  --Dirk Beetstra T  C 21:47, 27 April 2015 (UTC)
 * Yes, a mixture infobox. It seems that you're a bit late to the party, so to speak. See the above section under Tin indium oxide. I've decided to create a drafts for consideration. The mixbox is going to contain information about heterogeneous and homogenous mixtures, when the mixture contains a solid, the mixbox will only pertain to the circumstantial, elected phase composition, such as the range of α+β in a hypothetical system. Furthermore, the mixbox will show properties and other data only for special compositions, such as eutectic melting point, eutectoid mp. azeotropic bp., etc. The mixbox has another goal, inspite of major overlap in some of the mixbox fields, it use implementation will ensure that fields which pertain solely to pure substances will not be mistakenly filled for the mixtures, as happened to Hydrochloric acid in the past. Plasmic Physics (talk) 02:51, 28 April 2015 (UTC)
 * If you end up creating this, would you be able to put in safety data parameters? NIOSH has IDLH, LC50, LD50, PEL, and REL values for a pretty decent number of industrial chemical mixtures and it'd be nice to have a slot for these in this infobox as well as the regular chembox. Thank you! Emily Temple-Wood (NIOSH) (talk) 04:17, 28 April 2015 (UTC)
 * Noted, I'll add these fields to the draft. Plasmic Physics (talk) 08:29, 28 April 2015 (UTC)
 * Ah, I see I missed that discussion, I've been out. So, someone asked about a chembox for a mixture, someone answered that mixtures do not go into chemboxes and then a bilateral discussion started regarding whether this could be caught in a template.  There is no discussion whether the template should be there in the first place.
 * By the way, Hydrochloric acid is not a mixture, ITO is. --Dirk Beetstra T  C 05:01, 28 April 2015 (UTC)
 * Solutions are classed as mixtures. If you're still in doubt, the article on the acid even uses the exact word "mixture" to describe it under the section Physical properties. Plasmic Physics (talk) 08:29, 28 April 2015 (UTC)
 * Solutions are not classed as mixtures. I argue again, hydrochloric acid is not a mixture (and using Wikipedia as a reliable source for that is a nono .. solutions are not mixtures).  However, you obtain the solution by mixing two compounds.  Moreover, you misread "Hydrochloric acid as the binary (two-component) mixture of HCl and H2O has a constant-boiling azeotrope at 20.2% HCl and 108.6 °C (227 °F)." .. that is talking about the gas phase, not about the liquid (which at best one might consider to describe as a mixture of solvated Cl- ions, solvated H+-ions solvated water molecules and maybe the occasional solvated HCl molecules, but not as a mixture of H2O and HCl), and the gas phase is (indeed) a mixture of HCl molecules and H2O molecules.
 * I would consider a solution a mixture (and I think that is what IUPAC does) if one in principle could take out the individual constituents, in other words, some solutions behave as mixtures (hexane in benzene, where the molecules do not physically change each other beyond Van der Waals interactions), some solutions are not mixtures (HCl in H2O, where the molecules in the system are not the components the solution was made off), and some mixtures are not solutions (sand and sugar). I get the feeling that that is also what IUPAC gold book suggests in their terminology (they certainly do not talk about mixtures in their definition of solution, or about solutions in their definitions of mixtures), so even the disctinction I made here may be far beyond what IUPAC describes as mixtures and as solutions.
 * Anyways, I still do not see why we need a mixture box, where the articles about (true) mixtures can describe them and link to the individual components, whereas for solutions a chembox can be more than appropriate to describe a typical concentration (and the rest of the article can describe other 'notable concentrations', and some 'standard concentrations' (1,5, 10, 20, 30% .. )). --Dirk Beetstra T  C 13:12, 28 April 2015 (UTC)
 * | []Cl + + δ HCl | δ []Cl +  + HCl | HCl - this is called the /HCl system, The second boundary is equivalent to the solubility of hydrogen chloride in water. I did not say that all mixtures are solutions, but instead that all solutions are mixtures. Plasmic Physics (talk) 13:19, 28 April 2015 (UTC)
 * Can you produce me some reliable sources stating that all solutions are mixtures? Again, IUPAC GoldBook does not use the word 'mixture' in their description of a solution, nor does their description of a mixture mention solution.  And I still disagree that hydrochloric acid should be treated as a mixture (a mixture of what and what?).  --Dirk Beetstra T  C 15:53, 28 April 2015 (UTC)
 * Will the Oxford Dictionary of Science work for you? Heuristically Water and hydrogen chloride is just fine, they exist at the extremes, and all other species present in the system at any one time are in chemical equilibrium with them. Plasmic Physics (talk) 22:43, 28 April 2015 (UTC)
 * Over IUPAC .. mwaahg. Can I have a linky to that entry in the Oxford Dictionary?  --Dirk Beetstra T  C 03:59, 30 April 2015 (UTC)
 * Sorry, it's a paperback. If you're still interested, it is the fourth edition. Good libraries, such as those found at universities should have a copy or two, albeit of the more recent editions. It's good reading, I've read it cover to cover twice. Plasmic Physics (talk) 05:12, 30 April 2015 (UTC)
 * I still insist that I trust an organisation like IUPAC more to give the definitions than, even, the Oxford dictionary. --Dirk Beetstra T  C 17:39, 30 April 2015 (UTC)
 * What's the proposed scope here? I get the feeling that its all mixtures, including things like aqueous solutions of common compounds (salt, hypochlorite etc), various liquid/liquid mixtures (EtOH/water) as well as alloys and ceramics etc. --Project Osprey (talk) 08:53, 28 April 2015 (UTC)
 * That is correct. Just so that I'm clear, I'm not going to create articles on mixtures, just to use this template to death. Plasmic Physics (talk) 13:10, 28 April 2015 (UTC)
 * In what circumstances do you envisage it being used then? Is this a replacement or an alternative to Chembox? Or would you have both on the same page? --Project Osprey (talk) 13:24, 28 April 2015 (UTC)
 * In exactly those circumstances which you listed. It is not entirely a replacement of the Chembox, since it uses the Chembox; what it is, is a selection of alternative sections which are more suitable than the standard Chembox sections. Thus it is a case of either/or - both will not be displayed, concurrently in the same article. Plasmic Physics (talk) 13:50, 28 April 2015 (UTC)
 * I'm sorry, I don't entirely follow. You say that it uses the Chembox; does that mean that this is actually a new subtemplate for Chembox? i.e in the same way that Chembox is comprised of Chembox Identifiers, Chembox Properties, Chembox Structure etc this would be Chembox mixtures? --Project Osprey (talk) 16:12, 28 April 2015 (UTC)
 * Huh .. a Chembox mixtures-subtemplate which then would reproduce identifiers, hazards, properties, structures .. and so the main Chembox would only contain this subtemplate. This does not make any sense.  I presume that it is the other way around, that this is a new chembox, 'Mixturebox' which contains Mixturebox identifiers, Mixturebox Properties, Mixturebox Structure etc. prepared for having mixtures of different composition in it.  As for, e.g., hydrochloric acid, the possibilities go infinite in concentration-choice between 0 and 37% (excluding fuming varieties) I wonder how this will ever be a readable solution either - until now, I think that this is better solved with in-text prose and tables as is currently done.  --Dirk Beetstra T  C 16:29, 28 April 2015 (UTC)
 * Precisely! The new templates will be used in the Chembox under names such as Mixbox Identifiers, etc. With regard to HCl(aq), its Chembox will only display composition specific data at 20.2%, and at the four eutectic compositions. Plasmic Physics (talk) 22:43, 28 April 2015 (UTC)
 * Only? That is 5 datapoints.  And although systematic, the randomness of these datapoints makes distinguishing trends difficult (so one would consider to add 1M, 5%, 10%, 15% to it .. and drown in the table.  I argue again, this is better represented in tables in the prose.  --Dirk Beetstra T  C 03:58, 30 April 2015 (UTC)
 * Yes, but 5 useful data points nonetheless, where the solution exhibits very particular behaviour. As with the Chembox proper, it is not the intention of the mixbox to show trends. Trends can indeed be represented in the main prose, if they are actually desired. Plasmic Physics (talk) 05:12, 30 April 2015 (UTC)
 * If this goes ahead, this systematic method of choosing data points is really the only practical option. Consider what happens as the number of constituents are more than two. If the mixbox is to show a trend like you're proposing, then the number of required data points would increase exponentially (figuratively speaking) with each extra constituent. Plasmic Physics (talk) 05:41, 30 April 2015 (UTC)

I agree with Beetstra that phase diagrams don't belong in the Chembox - they've often very complex (particularly for alloys) and need to be explained. However, I do see a case where you might like to provide some information on how something behaves as a mixture without having to write a whole section about it (which might not fit the tone of the rest of the article). In the simplest sense that might involve creating some new parameters for Chembox Properties such as Eutectic point and Azeotrope --Project Osprey (talk) 09:37, 30 April 2015 (UTC)


 * Does that mean by extension that you agree with me too, because I am also opposed to having entire phase diagrams in the Chembox?. I'm drafting exactly what you're proposing, albeit in a dedicated sub-template to avoid confusion by novice editors, who will no doubt try and fill (incorrectly) non-applicable or otherwise inappropriate fields. Plasmic Physics (talk) 10:23, 30 April 2015 (UTC)
 * I also suggest that we limit the composition range to the isothermal phasic structure in which the most common formulation is located. For example, if at STP a mixture with the common formulation A:B has the phasic structure of α+β, then the compositional range of the Chembox is limited to the α/α+β and α+β/β boundaries. Also limit the temperature in a similar manner, take only the temperature range about RT, for which there are one to one transitions within the afore limited compositional range. Accordingly, the Hydrochloric acid Chembox will only cover the liquid solution, not the solid, vapour, or liquid and vapour portions, and will only cover 0-68% wt, if that is its solubility. I see one problem having arisen, what to do about miscibility gaps? Do we split the composition range in two, or do we ignore the gap entirely in terms of the range? I'm in favour of the latter, for the sake of continuity. Or, is there a third option not yet considered? Plasmic Physics (talk) 11:04, 30 April 2015 (UTC)
 * For what its worth, and I am sorry to have to say this - I have rarely seen anything done by Plasmic Physics that is good good for Wikipedia. He may have good intentions, but he is possessed by frantic instincts and strange or weak technical perspectives.  IMHO, almost every article he touches is worse for his contributions.   --Smokefoot (talk) 12:05, 30 April 2015 (UTC)
 * You're are most certainly not sorry, as this is an absolutely unnecessary criticism of my character. You've been warned before by others for laying into me for no good reason. I strongly suggest you stop before you take this somewhere we both don't want to go. Plasmic Physics (talk) 12:33, 30 April 2015 (UTC)
 * Not only unnecessary, but unacceptable. WP:NPA refers. Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 15:44, 30 April 2015 (UTC)

Look, there is nothing wrong with PP making the templates and see what comes out of this. I do however expect that PP regularly consults the community (like this question here), including how this actually is going to be (maybe not as a replacement of the chembox (more boxes is less recognisability) but as a systematic box further down the page. I also suggest to apply the condition that before anything goes life in mainspace, it is first properly put into sandboxes in user or project space and discussed to death, and we get a clear 'go' by consensus (clear support to get it implemented in mainspace, not a situation where there is no one commenting and hence no opposition).  --Dirk Beetstra T  C 17:39, 30 April 2015 (UTC)
 * Agreed. I'm having a hard time picturing what this is going to look like; you say you don't want to include phase diagrams but then go on to talk about listing α+β, then α/α+β and α+β/β boundaries - which sounds very much like a phase diagram to me. Is there any way you could do a mock-up of it so we could see that it would look like? I feel I should point-out that PP can't actually edit Chembox. Partly because he's already banned from doing so, but also because its protected so that only template editors and administrators can edit it. We would at some-point have to move this conversation over to Wikipedia talk:Chemical infobox and see what DePiep makes of it. --Project Osprey (talk) 22:32, 30 April 2015 (UTC)
 * No, no, I didn't mean that the boundaries are to be expressed in detail, but only that they be used to limit the scope of the infobox. I'm not actually banned from editing the master chembox, only the field entries in articles which use it. Plasmic Physics (talk) 10:18, 1 May 2015 (UTC)
 * For what it's worth, I was planning on discussing it once the first drafts were completed, but it seems that I've been preempted. And for all that has been said, I still lack an answer to my original question. Plasmic Physics (talk) 22:20, 30 April 2015 (UTC)
 * Your first question was " Since I'm adding new fields, how do we decide in what order they (fields) are to be listed in? I'm currently working on template:Mixbox Identifiers" - its really hard to answer without knowing which fields we are talking about. Do you btw. have a link to the template? Mixbox Identifiers doesnt exist. Christian75 (talk) 23:12, 30 April 2015 (UTC)
 * So you're saying that there is no general method, that each new field is added in a particular position on a whim? So far, I'm going to add USN number to the identifiers mixbox, while removing others. It's in my sandbox, it has not come very far. Plasmic Physics (talk) 23:39, 30 April 2015 (UTC)
 * The identifiers are alphabetical order, and other fields in other "properties" are what the template editor thought was a good idea. Sometimes "the most important" are first ... Christian75 (talk) 08:59, 1 May 2015 (UTC)
 * Thanks. What is the purpose of the CASNos, CASNoOther, and CASOther fields? Is anyone aware that the EINECS field entry is a dead link? Plasmic Physics (talk) 10:10, 1 May 2015 (UTC)
 * If I don't get an answer from someone, I'm going to assume by default that they are unnecessary, and consequently remove them from the draft. Plasmic Physics (talk) 05:47, 4 May 2015 (UTC)
 * The identifiers are currently in alphabetical order (if the edit has not been undone), but there it seems there was no consensus for the bold implementation of that
 * CASNos, CASNoOther and CASOther are I think all obsolete now (replaced with multiple CASNo#-fields; it may be that one is left over for hand-formatting and addition of more in extreme cases), EINECS is of interest, though maybe the link needs to be adapted. --Dirk Beetstra T  C 06:54, 4 May 2015 (UTC)
 * Thanks. Plasmic Physics (talk) 07:20, 4 May 2015 (UTC)
 * If the Mixbox call up a template, how do I add the template directly? For example, the Chembox calls up:
 * How would I add Chembox UNII directly into the chembox, rather than create a dedicated article? Plasmic Physics (talk) 09:35, 4 May 2015 (UTC)
 * Just use as normally: - but then it shows up when there is no UNII parameter given.  --Dirk Beetstra T  C 10:32, 4 May 2015 (UTC)
 * I see, so would need a dedicated template for it to only show when the value is not empty. Plasmic Physics (talk) 10:37, 4 May 2015 (UTC)
 * You could also do {{#if:{{{UNII|}}}}|}}, then all between '|' and the final '}}' will be displayed only if there is something in the parameter 'UNII'. You will however find that on more complicated templates that quickly turns into a form of spaghetti that is very difficult to read (especially if the 'what to display' becomes multiple lines).  Keeping a line for each, with a short statement and calling a subtemplate keeps it more clear.  Also to keep the subtemplates in line with each other is easier, and depending on the sensitivity of the subtemplates ('Chembox UNII' in this case), you can leave some free to edit, others to template editors, and yet others to admins only (the calling template ('Chembox Identifiers') generally gets a high protection level due to the damage a single edit (by any editor, or a vandal) can do to many pages).  --Dirk Beetstra T  C 11:02, 4 May 2015 (UTC)
 * You could also do {{#if:{{{UNII|}}}}|}}, then all between '|' and the final '}}' will be displayed only if there is something in the parameter 'UNII'. You will however find that on more complicated templates that quickly turns into a form of spaghetti that is very difficult to read (especially if the 'what to display' becomes multiple lines).  Keeping a line for each, with a short statement and calling a subtemplate keeps it more clear.  Also to keep the subtemplates in line with each other is easier, and depending on the sensitivity of the subtemplates ('Chembox UNII' in this case), you can leave some free to edit, others to template editors, and yet others to admins only (the calling template ('Chembox Identifiers') generally gets a high protection level due to the damage a single edit (by any editor, or a vandal) can do to many pages).  --Dirk Beetstra T  C 11:02, 4 May 2015 (UTC)

In creating a new field for the Mixbox Properties, I need help to figure out why it is not displaying. The field is composed of a value, and a comment, only the comment is displaying, why? The template is being tested at User:Plasmic Physics/sandbox1. The field I'm concerned with is Eutectic Density. Plasmic Physics (talk) 03:09, 6 May 2015 (UTC)
 * User:Plasmic_Physics/Mixbox_EutecticDensity/format has no code to display it. --Dirk Beetstra T  C 03:29, 6 May 2015 (UTC)
 * Thanks, fixed. Plasmic Physics (talk) 04:37, 6 May 2015 (UTC)

Royal Society of Chemistry 2015 awards and prizes
The 2015 RSC award and prize winners have been announced. Lots of biographies and articles about the awards need to be updated, (as do the Wikidata items); and perhaps some new biographies written Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 09:57, 7 May 2015 (UTC)

Royal Society of Chemistry editathon, 29 July 2015
You are warmly invited to an editathon in the library of the Royal Society of Chemistry, London, on 29 July 2015. Booking essential. Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 16:26, 8 May 2015 (UTC)

Draft:Solvent models in computational chemistry
Please review this draft, it is one of the oldest at AFC still waiting for review. Roger (Dodger67) (talk) 17:43, 10 May 2015 (UTC)


 * Yes an expert look would be much appreciated (I intended to ask about 3 weeks ago, but forgot). Joseph2302 (talk) 21:35, 10 May 2015 (UTC)


 * Good enough for mainspace IMO. Partially overlaps with implicit solvation and water model, but is a reasonable overview of the topic. Could be titled just solvent model, since there's no other field competing for the title. Opabinia regalis (talk) 22:04, 10 May 2015 (UTC)


 * Thank you for your help, I accepted it, and named the article Solvent models. Joseph2302 (talk) 22:11, 10 May 2015 (UTC)
 * It is an important topic - accolades to those helping this thing along. My advice, as almost always, is to start an article almost exclusively with reviews and books.  As it stands, refs 9-27 appear to be primary references published in Western (natch!) journals.  One is risking WP:UNDUE to select a handful primary refs from 840+ articles published on this large subject. In the past decade, ca 40 reviews, satisfying WP:SECONDARY, have appeared on "solvent models" according to Chemical Abstracts.  But the main thing is the article is certainly welcome.--Smokefoot (talk) 23:41, 10 May 2015 (UTC)


 * Most of those are references to the papers that describe the method/application/parameter set. It would be good to add reviews to demonstrate that they're the most relevant/highest impact methods though. It is IMO best practice to cite the actual original descriptions as well - no need to make people follow citation breadcrumbs, and in many cases the choice of review article to cite is significantly more arbitrary than the choice of methods papers. Opabinia regalis (talk) 06:43, 11 May 2015 (UTC)

International OSH data
Hi everyone! I was wondering what people thought of incorporating international exposure limits and guidelines into the chembox somewhere. Currently it's pretty US-centric, but standards can vary around the world. An example of the data we have on hand at NIOSH is here. My concern is that it could become unwieldy, but I also think it's pretty valuable information. What do you all think? Best, Emily Temple-Wood (NIOSH) (talk) 01:10, 27 May 2015 (UTC)
 * It's a nice idea but I don't think its workable. We clearly couldn't include all the data in that document, that really would be unwieldy. I also don't think it's possible to include data in such a way that it only displays on the relevant language wiki (i.e. 'Occupational Exposure Limit - FRANCE' only showing in https://fr.wikipedia.org/); although maybe oneday Wikidata could allow for this. However, I note that there's quite a lot of info there about how mutagenic/carcinogenic things are; that is of public interest as most people seem to feel that virtually any chemical may give them cancer. Perhaps there's a discussion to be had about whether we include some of that? --Project Osprey (talk) 09:01, 27 May 2015 (UTC)
 * I'd be happy to steer you through getting a relevant property for adding this to Wikidata, if you need help. We'd probably start by just adding the "RRD59F8" identifier from your example. Does NIOSH publish an equivalent of http://www.cdc.gov/niosh-rtecs/RRD59F8.html as linked data (yet)? Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 09:12, 27 May 2015 (UTC)
 * Thanks - that would be very helpful! Could you drop me a note on my Wikidata talk page? (We're very interested in helping to improve Wikidata.) I don't believe we have it published as linked data but I will ask. Thank you again! Emily Temple-Wood (NIOSH) (talk) 16:13, 27 May 2015 (UTC)
 * I wouldn't include them into chembox, but in a section entitled Occupational exposure limits or similar a table with these values would be helpful. --Leyo 12:26, 27 May 2015 (UTC)
 * That's a great idea - much better than chembox and much less unwieldy. what do other people (?) think? Emily Temple-Wood (NIOSH) (talk) 16:13, 27 May 2015 (UTC)
 * Potentially, but perhaps with some constraints? If the exposure limits are the same everywhere then maybe don't bother with a table, a referenced sentence stating the limit and the counties should suffice. Personally I'd avoid adding such detail on stub pages as it would just turn them into a de facto MSDS. I would suggest that the contents of Group 1, Group 2A and Group 2B carcinogens might be a good place to start, as too would be Mutagens, Teratogens and Pesticides. That's a pretty big area to cover and should give plenty of opportunity for feedback from other editors, on the basis of which we could reconvene to discuss possible expansion into other articles. Does that sound like a good idea to everyone? --Project Osprey (talk) 08:53, 28 May 2015 (UTC)
 * That sounds great, I can start with the Group 1 and Group 2s and see what people think, and if it turns out to not be useful it'll be pretty easy to undo. Emily Temple-Wood (NIOSH) (talk) 21:25, 28 May 2015 (UTC)
 * See your wikidata account. Snipre (talk) 11:50, 28 May 2015 (UTC)
 * Will do. Emily Temple-Wood (NIOSH) (talk) 21:25, 28 May 2015 (UTC)

what can Wiki Education Foundation do to help WikiProject Chemistry?
Hi WikiProject Chemistry,

The Wiki Education Foundation wants to know what it can do to empower editors who work on science-related content on Wikipedia.

If you're familiar with Wiki Ed, it's likely by way of our classroom program, which grew out of the Wikipedia Education Program and through which we provide support for instructors and students who work on Wikipedia as part of a class assignment. This post is about something different, though. We'll be continuing to develop that program, of course, but we also want to start working on ways to help the existing Wikipedia community directly.

In 2016, Wiki Ed will be running a campaign tentatively titled, "Wikipedia Year of Science". The goal, generally stated, will be to improve the content and coverage of science-related content on Wikipedia ("science" interpreted loosely). Whereas our classroom program, as with many other extra-organizational initiatives, is premised on attracting and/or training new users, my aim is to figure out the sorts of things we can do to help the editors who are already engaged in the improvement of science content. The question is indeed wide open, but think about it this way: we have staff and a lot of institutional connections; how can we use our resources and relationships to support you? For example, is there a special collection of photos we should try to get on Commons? What about a document archive? Databases or specific journals? Organizationally, is there software that could be built that would help people working on these topics? What kinds of research could we conduct or help to organize that would help you to work more effectively? What are ways we can connect you with other human resources -- experts, for example (though, again, this is not intended to be an outreach program)? How could we motivate people to contribute, whether it be adding content, improving content, conducting reviews, adding images, improving sourcing, or any other part of the process? How can we get more chemistry-related articles to FA/GA? How could we help you to spend more of your time working on things you find fun and interesting and less time on process, organization, and functionary duties?

These questions are really just intended to get the ball rolling as this really is a nascent idea. So all ideas are welcome: big, small, obvious, obscure, ambitious, simple, technical, organizational.... I want to be clear that this is not just some survey -- the feedback I get will help to give shape to the "Year of Science" campaign.

I should also mention that this community engagement program we're starting isn't limited to the Year of Science campaign. Researching and planning it is high on my priority list right now, but we can also talk about shorter- or longer-term projects you may have in mind, too.

Apologies for the long message and thanks for your time. Looking forward to hearing what you think. --Ryan (Wiki Ed) (talk) 04:05, 28 May 2015 (UTC) (volunteer account: User:Rhododendrites)
 * Dear Ryan: Many technical editors here tremble each time we hear about Wiki-Ed projects because another wave of these forced labor groups (aka homework doers) is poised to unleash chunks of uneven content, often with light supervision by an instructor with little experience with Wiki-Chem culture (notability criteria, general perspectives (vs blogging), peacock-free writing, reliance on good sources).


 * Another problem is that your team seems determined to recruit new editors (not sure why you need to do that) and the team here at Wiki-Chem is determined to improve and protect content. These goals can be in conflict.  The quality of the chemistry content has improved to the stage that the average undergraduate student is over their head unless carefully supervised by a pro.  Probably for this reason, student projects seem to be shunted into environmental and toxicological themes.  Such topics are easier for them to write about and content is readily Googled. These soft science topics actually take a lot of judgement, so I worry about the quality control, and hopefully folks at Wiki-Ed are also concerned about quality, but we never hear about that aspect, only about effort to recruit. Well, those are my views.  --Smokefoot (talk) 14:13, 28 May 2015 (UTC)
 * I understand where you're coming from, and that's why I'm a little confused by this response. Maybe I'm misunderstanding what you're saying, but the program I'm looking for help with is one intended to support active community members like yourself and explicitly not about bringing students in. Maybe I should've tweaked my wording/length/presentation along those lines?


 * Wiki Ed wants to cultivate learning by enriching content on Wikipedia and to do that we focus on building connections between Wikipedia and academia. The classroom program, while it exists for Wikipedia, necessarily places most of its efforts on the academia side of things -- bringing students and instructors from academia to Wikipedia. That's not what I'm working on now, though. In fact this community engagement program is, in part, informed by concerns people have expressed about outreach programs in general -- concerns that you're voicing now: that some of the resources being dedicated to outreach (bringing in new users) might be better spent supporting the existing editor base.


 * So I want to know what WikiChem needs/wants, thinking outside of the classroom program paradigm -- or, if anything, thinking about it as a reversal: Wikipedians have helped academic organizations and institutions by working with instructors and students; what can they now do for you? --Ryan (Wiki Ed) (talk) 18:12, 28 May 2015 (UTC)
 * Thanks for the explanation (I lined-out my response as being irrelevant). About "connections between Wikipedia and academia"  As to why more academics do not edit here: possibly Wikipedia is seen as "lame" if one is established.  Maybe because the content is not viewed as respectable scholarship.  Many academicians are focused on career advancement (vs altruism), and editing Wikipedia does not help one's career - in fact editing Wikipedia might even do the opposite. When academics do edit here, it is usually pretty WP:COI-ish.  Even famous chemists mainly edit here with a focus on citations to their own work - I see this all the time. One group of academic/industrial chemists that have a broad view (and perhaps have their egos slightly more under control) are retirees.  Getting more them on board would be a useful goal.  I sense that trend is slowly happening.--Smokefoot (talk) 22:22, 28 May 2015 (UTC)
 * One thing I would like is some drawing tools for drawing crystal structures. Perhaps inputting a set of atom coordinates in a standard form and spitting out a .svg file.  Another is to draw electronic orbitals, or cross sections through electron density. Perhaps all these topols are readily available, in which case instructions would be good. Other thing we could get from academics are photos of equipment or substances. We could get numeric data such as coordinates for a spectrum plot, so that a free diagram can be produced. Perhaps Wikipedia editor business cards could be produced for active people here. Graeme Bartlett (talk) 12:03, 30 May 2015 (UTC)

Public attitudes to chemistry
The Royal Society of Chemistry (where I'm Wikimedian in Residence) has published a major study into "public attitudes to chemistry in the UK". Perhaps someone would like to make use of this in a relevant article(s)? Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 08:45, 2 June 2015 (UTC)

Wikipedia talk:Articles for creation/Heterogeneous Catalytic Reactors
Dear chemistry experts: One more old AfC draft to consider before it is deleted. Is this a notable topic? Should it be improved, or let go? &mdash;Anne Delong (talk) 05:22, 9 April 2015 (UTC)
 * I'd say let it go. It's a subset of reactor design...viable topics would be the parent idea of reactor design and the child ideas of each individual reactor design. The sole claim of notability for this specific subset ("one of the most commonly utilized reactors in the chemical engineering industry") seems pretty weak: yhe only other possible types seem like they would be "homogeneous" or "non-catalytic", and those are also very popular. We do have articles about at least some of the specific types and some of the specific reactions mentioned (with cites), and they do not completely agree with the article here (what type of reactor is used in a certain context, what the flow characteristics are). DMacks (talk) 05:38, 9 April 2015 (UTC)


 * Thanks, DMacks. I have deleted it under db-g13. It can always be refunded if someone in the future decides that the topic has become notable, or wants to make a redirect out of it.&mdash;Anne Delong (talk) 02:18, 10 April 2015 (UTC)


 * DMacks, the article is in mainspace now, restored and accepted by . If you still have concerns, you may wish to discuss them with him on the talk page, or you (or someone else who knows about the topic) may wish to improve the article.&mdash;Anne Delong (talk) 12:10, 2 June 2015 (UTC)


 * I accepted on the basis that there should an appreciable technical literature on reactor design specifically, tho I'm not really in a position to look for it.  DGG ( talk ) 14:57, 2 June 2015 (UTC)

Royal Society of Chemistry editathon, 8 August 2015
Further to the above, you are also invited to another Royal Society of Chemistry editathon, in Widnes, Cheshire, on Saturday 8 August. The event will be held at Catalyst, a museum of the chemistry industry. Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 13:59, 3 June 2015 (UTC)

Data pages
Hi, folks. I was just recently reminded of the roughly 170 chemical data pages held within and. There has been sporadic discussion in this project over the years, some that call into question their worth, but no conclusions on what, exactly, to do with them. They appear to be an old concept; the oldest I can find were first introduced in about 2005. I have some major concerns about these kinds of pages and I was hoping that you kind folks could either educate me as to their use, purpose, and utility for readers of this encyclopedia. As far as I can tell, at the moment these data pages are mostly a dumping ground for information deemed important but that doesn't fit into the main article space. I think this runs afoul of WP:RAWDATA and is a misuse of article mainspace -- the disambiguation term in parentheses identifies the purpose of the article, not its topic. The articles rarely have any prose, leaving an indiscriminate collection of data. We are no more allowed to create a "PAGENAME (data page)" when the amount of data overwhelms the main article's text that we are to create a "PAGENAME (gallery)" article if there are too many images. Even water (data page) is just a collection of data tables with little prose.

So, I was hoping that either you can help me understand these pages and help me see how they fit with Wikipedia guidelines or perhaps we can reach some sort of consensus on what to do with them. I would propose shifting all the info currently in them into a talk page subpage with a note left on the talk page of each article so that future editors can extract info in order to develop future articles. The link generated by chembox would be eliminated, as there should be no cross-namespace links. I'm not sure any of these are maintained much or at all, so any input you may have would be helpful. If there isn't much discussion here, I will likely take all of them to AfD for a wider discussion. Cheers, Rkitko (talk) 23:03, 6 June 2015 (UTC)


 * In my original note above, I should have mentioned that at least three of these data pages have been taken to AfD, with outcomes ranging from merge to delete: Articles for deletion/Bentiromide (data page), Articles for deletion/Yttrium(III) oxide (data page), Articles for deletion/Sulfuric acid (data page). Rkitko (talk) 15:44, 7 June 2015 (UTC)


 * The reason these supplementary data pages were created was to prevent the chembox from becoming too long and overwhelming chemical articles. The parent article provides context, hence the data is not indiscriminate and therefore does not violate WP:RAWDATA. The only potential problem is where the these pages are placed (in main space). Wikipedia does not seem to provide a mechanism to store supplementary data.  One solution is to move these data pages to subpages of the main chemical article (e.g.,  water (data page) → water/data ), but this is merely a semantic difference since articles with "/" in them are essentially new articles. Another potential solution is to move the data to WP:WIKIDATA. Finally there should be no cross-namespace links – These are not cross namespace links. These are wikilinks. Furthermore, interwiki links such as Wiktionary are frequently included in Wikipedia articles. Boghog (talk) 05:22, 7 June 2015 (UTC)


 * I understand the rationale, but I don't think the information present in the data pages was or should have been included in the infobox. Infoboxes are meant to be summaries of the article content. If this info is merged back into the main articles, I imagine it would be in the context of a section on certain properties of that chemical. Your comment misses the point that articles are meant to provide their own context. As it stands, the data pages are indiscriminate collections of data, no different from a stand-alone article that would be an indiscriminate collection of images.
 * Allow me to clarify my earlier comment; I was suggesting moving water (data page) to Talk:Water/data page, then removing any links to the subpage from article namespace. The talk space subpage would be a place for editors to find the supplementary data for further article development. Subpages should never be in the article namespace, but the stand-alone article water (data page) is essentially filling the role of a subpage. I'm not certain I understand your point regarding interwiki links; those are links to sister projects and always found in the external links section, not in infoboxes. (An unrelated concern of mine is the number of external links to chemical identifiers in the chembox; shouldn't these be moved to the external links section via some sort of template similar to authority control?)
 * I'm not familiar enough with Wikidata to determine whether it is a solution to this problem. At the very least, I would like this discussion to recognize that these data page articles are 1) improperly named and 2) not appropriate for article namespace as currently used. Cheers, Rkitko (talk) 14:39, 7 June 2015 (UTC)
 * Concerning external links in infoboxes, the WP:ELPOINTS guideline allows them. Boghog (talk) 19:01, 7 June 2015 (UTC)
 * Indeed you're right about that, but I think having nearly a dozen identifiers is pushing it. I think that guideline is meant for infoboxes that have a single external link, such as the link to an official website of a person or organization. I'm familiar with some of the websites linked to in the identifiers section of the infobox, but it's a bit out of control. The taxobox for tree of life project groups could go wild with similar ELs to taxonomic databases, but we've resisted that temptation for the sake of a smaller infobox that summarizes the text. Rkitko (talk) 21:29, 7 June 2015 (UTC)

I am not really up to date with WP:WIKIDATA, but that is probably where these pages should be moved, now it exists. This would also felicitate their use on other language wikipedias. -- Bduke   (Discussion)  06:19, 7 June 2015 (UTC)


 * Some chemical wikidata already exists and below are a few examples:
 * water (data page) → Q283
 * diethyl ether (data page) → Q202218
 * Right now, it appears that one can only retrieve the data as a crude data dump that is not organized in any particular way. Wikidata phase 3 lists have not been implemented yet. I am not sure how these lists will work, but once implemented, these may make possible a display all the data on a particular chemical in a more organized and readable format. Boghog (talk) 08:17, 7 June 2015 (UTC)
 * I also just noticed Wikidata WikiProject Chemistry which would be the logical place to follow-up on this proposal. Additional data fields would need to be defined before all the data in the data pages could be moved. All in all, this seems like a lot of work for limited benefit. How are the existing data pages harming our readers? Boghog (talk) 08:46, 7 June 2015 (UTC)


 * Thanks for the info regarding Wikidata. Such data does seem more at home on a sister project, similar to how we display extra images at Commons or full text of public domain books or other works at Wikisource. How are the existing data pages harming our readers? -- that's the wrong question. A data page has no other purpose than to be a dumping ground of various other bits of data on that chemical; information deemed not important enough to fit in the main article. No explanatory prose is given with the tables, so a reader finding themselves on such a page would not know what to make of it. Does the topic covered by a (data page) article even meet WP:GNG? If you had to define what the topic of a data page is, could you? In contrast, articles like properties of water and vapor pressure of water have a reasonable title, scope, and clear explanatory prose complemented by tables and figures. It appears to me that the (data page) articles are holding grounds for extra information that editors didn't want to lose but it still doesn't have a home in a main article yet. If we didn't have vapor pressure of water, I suspect the data tables and figures found there would have ended up at water (data page). If the data pages are just meant to be dumping grounds for future article development, they should be subpages of the main article's talk namespace instead. That's where we develop articles. Rkitko (talk) 14:39, 7 June 2015 (UTC)
 * The existing chemical data pages contain properties of individual chemicals. Hence one solution is simply to rename "compound X (data page)" to "properties of compound X". The parent chemical articles are notable and if supported by reliable sources, the properties of a notable chemical are also notable. Boghog (talk) 19:01, 7 June 2015 (UTC)
 * I'm not opposed to such an idea, but I still think the existing data pages would need a lot of work in order to become stand-alone "properties of compound X" articles. That might just shift the problem to one of maintenance and article building, but being an eventualist I see no problem with that, if tagged appropriately. Properties of different compounds are certainly notable, but it strains the boundary of that if there's never going to be any explanatory text linking the different properties. Rkitko (talk) 21:29, 7 June 2015 (UTC)
 * Data pages are a problem for WD because people don't know which info to store in the item of the main article and what in the item of the data page. I agree with Rkitko about its conclusion that data pages are full of data that people don't know how to use but don't want to delete.
 * WD is not currently able to store numeric data with units but this will be available on a few months. But even with that feature WD is not the good place to store sets of data like the ones presented in tables (we can store but as individual data values and we have to find a way to link the individual pieces of data in a group). Snipre (talk) 15:20, 7 June 2015 (UTC)
 * Thanks for that additional info on Wikidata. I have always been skeptical of its current utility. I hope to see it improved to where it can be used more extensively, but it's clear that it would not be an appropriate solution for these data pages at this time. I don't want to see this info deleted, but it's current form is unacceptable. There are a couple of outcomes I can see happening: 1) No action, data pages remain where they are and in their current form, 2) The data pages are renamed with a more appropriate dab term and some editors step forward to spruce them up, 3) data pages are moved to a subpage of the main article's talk namespace for editors who want to slowly develop companion articles similar to those we have on the properties of water or water vapor, 4) the data pages are deleted. I prefer #3, but am I missing any other options? What are the arguments for each? Is there any hidden value in these pages that isn't immediately obvious? Cheers, Rkitko (talk) 15:44, 7 June 2015 (UTC)
 * Your solution doesn't help because this doesn't give an answer to the question what should be presented in the main article and what in the subpage. The problem is not the storage but the spliting of the data. Snipre (talk) 16:32, 7 June 2015 (UTC)
 * That's a question best answered by those who edit chemistry articles, which is why I came here. The subpage would not be for display, but for article development. In all ~170 cases where data pages exist, I alone cannot tell you what should and should not be included in the main article. All I can do is say the current situation is unacceptable. My proposal preserves the information for other editors knowledgeable enough to work with it while also removing it from article namespace, which fixes the WP:RAWDATA issue. Rkitko (talk) 18:03, 7 June 2015 (UTC)
 * The hidden value in this data is that it may of interest technically inclined readers that may later become content contributors. These readers may look at the supplementary data and then say, why isn't this mentioned in the main article and then go ahead and include that data with accompanying explanation into the article. My problem with solution #3 is that if the data page is buried as subpage of talk and if the link from the infobox to the data is removed, the data will likely be forgotten and will be no use to anyone. Removing the link between the infobox and the supplementary data is a non-starter.  Boghog (talk) 19:41, 7 June 2015 (UTC)
 * I am sympathetic to the desire to have all this technical information, especially for expert editors who have certain specialties. Do note that I was also suggesting if the data table were to be moved to a subpage of the talk namespace, that a prominent link would be placed on the talk page to alert editors to its presence for the purpose of future article creation or editing. I'm warming to your idea above of moving these to Properties of X articles; in that case, the (data page) link could be updated to a "properties" link. I know very little about your project here; are there a fair number of interested and active editors that could help sweep through this relatively small number of articles to spiff them up just enough to make them readable? If you can convince me of that and no one disagrees, I see a better solution here. It may need a case-by-case basis, however, as many could be merged into their main articles (e.g. there's not much data in Mesembrine (data page) and this one could effectively be merged into Mesembrine). Rkitko (talk) 21:29, 7 June 2015 (UTC)
 * Some notes.
 * Simple and short, when a data page exists it will be linked to from and, as it is related content. That is not a route to propose deletion of the data page.
 * The elements data pages have different content, as the name says: Boiling points of the elements (data page). Most remarks made here about pages like Ammonia (data page) will apply to these pages too, especially when about wiki content handling. However, a structure change or move for these pages in general is no0t similar. -DePiep (talk) 14:13, 8 June 2015 (UTC)

Today's featured article/June 25, 2015
This is just a language question: is there any difference in tone or meaning between "behave as a metal, with a cationic chemistry ..." and "behave as a cationic metal ..."? - Dank (push to talk) 01:51, 14 June 2015 (UTC)
 * It would be difficult to identify a more inconsequential (or is it, less consequential?) topic in chemistry than astatine. So if you screw up this article ("cationic metal - huh"?), no one who works in the real world gives a hoot. Grumpily, --Smokefoot (talk) 02:12, 14 June 2015 (UTC)
 * Well, astatine is thought to offer promise as a real world cancer radiotherapy agent. To the extent that our article provides a one stop consolidation of its properties it would be worth getting this right, would it not? One would be hard pressed to find a better single source on astatine anywhere, the majority of which are no more than "here be dragons" equivalents, in comparison. Poking the bear with a sore head, -- Sandbh (talk) 11:54, 17 June 2015 (UTC)
 * How about Flerovium? Anyways, they look interchangeable to me but the latter is more concise. VQuakr (talk) 02:16, 14 June 2015 (UTC)
 * Sentence has been changed, it can form cations that's not really the same as being a metal. --Project Osprey (talk) 09:15, 14 June 2015 (UTC)
 * Thanks ... and the word "metal" is used in a different sense earlier in the TFA column, so I like that change a lot. One more question ... would it go too far to say this? "less is known about astatine than almost any other element". - Dank (push to talk) 13:59, 15 June 2015 (UTC)
 * Actually ... striking, there's no need to say anything about that. The rest of the text gives the right impression, I think. - Dank (push to talk) 14:43, 15 June 2015 (UTC)

Mercury toxicity
We could use some real chemical judgement at Administrators' noticeboard/Edit warring, List of unusual deaths and Karen Wetterhahn on the mechanisms of mercury poisoning when absorbed as dimethylmercury, and how to communicate this to a lay audience. Thanks. Andy Dingley (talk) 14:10, 19 June 2015 (UTC)

William Lofland Dudley
Would any of you guys be willing to add your insight to the article of William Lofland Dudley? A very interesting fellow in my opinion but the article is crippled if one is asking me to do a proper treatment of chemistry. Cake (talk) 16:12, 20 June 2015 (UTC)

Benzene halides list
Hi everyone, I'm looking for a complete list containing all the possible benzene halides structures. I want to compile a Navbox for the italian wikipedia, here's my sandbox on it.wiki, to give you an idea of what I mean to do (mono, di,tri, penta and esa-sostituiti means mono, di,tri, penta and hexa-substituted). Thanks for the help--Samuele Madini (talk) 13:14, 22 June 2015 (UTC)

C10-18 Triglycerides Polyglyceryl-3 Esters Phosphates
Would anyone be keen to create a stub for C10-18 Triglycerides Polyglyceryl-3 Esters Phosphates? Jared Preston (talk) 22:24, 23 June 2015 (UTC)

WikiProject Polymers
As far as I tell WikiProject Polymers is dead and has been dead for sometime. The project is quite small, with only 872 listed pages but with no active participants issues may being to pile up. What is the procedure in these situations? Is the project left in the hopes that new editors may revive it, or do we fold the project into this one? --Project Osprey (talk) 22:16, 20 June 2015 (UTC)
 * A serious proposal to merge should be honored. But take care: kill that dead WP. Otherwise, we're left with a web of sort-of alternate names for Chem. (My bad experience: WP:Chemicals and WP:Chemistry -- just seeing these names reopens that headache). No Venn. -DePiep (talk) 22:39, 23 June 2015 (UTC)
 * Merge it with WP:Chemicals. 2.110.98.101 (talk) 22:59, 23 June 2015 (UTC)

A chemists perspective on catalytic triads
Hi, I'm hoping to nominate Catalytic triad to be reviewed for GA status soon. It would be good if a few chemists could cast their eye over it to check if the chemistry aspects are sound. Thanks in advance for any help. T.Shafee(Evo&#65120;Evo)talk 12:21, 24 June 2015 (UTC)
 * Looks promising.

Suggestions:
 * Anchor the lead sections with textbook references. Lots of general sources on proteases and related topics.
 * Removed English from figures. Put it in captions.  Having English in your figures hurts their transferrability to other languange Wiki's and can make the article appear parochial
 * Minimize reliance on primary journal references (FEBS Lett?) and replace with books and reviews. See  WP:SECONDARY.  Tens of thousands of primary journal articles appear annually, Wikipedia has no aspiration to keep up with that gusher, and we have no need to be absolutely cutting edge - we are looking for settled knowledge.
 * Final comment, the usual problem with large articles developed by single editors is conflict of interest (WP:COI), often inadvertent. If you have a conflict of interest - are citing yourself or colleagues, declare it or remove it.--Smokefoot (talk) 14:17, 24 June 2015 (UTC)


 * Thanks for the advice. The article was one of the first I majorly contributed to so it's sometimes hard to dispassionately see the flaws. Good plan with more secondary and textbook refs. Stryer's Biochemsitry should help. I've avoided any self-citation, although I may suggest one in the talk page for someone else to review. I'll have a look at removing wording from images. Some of it I think is preferable to keep, but at the very least I'll make some text-less versions to put up on wikimedia commons (a habit it'd generally be good to get into). T.Shafee(Evo&#65120;Evo)talk 10:46, 25 June 2015 (UTC)

Merge mepirodipine with Barnidipine
Please merge mepirodipine with Barnidipine. Snipre (talk) 14:12, 25 June 2015 (UTC)
 * Nothing to merge (nearly same content (same structure, same CAS, etc.), so I redirected mepirodipine to barnidipine, and added cn for IUPAC name (different for the two articles). Christian75 (talk) 21:13, 25 June 2015 (UTC)

Copyright Violation Detection - EranBot Project
A new copy-paste detection bot is now in general use on English Wikipedia. Come check it out at the EranBot reporting page. This bot utilizes the Turnitin software (ithenticate), unlike User:CorenSearchBot that relies on a web search API from Yahoo. It checks individual edits rather than just new articles. Please take 15 seconds to visit the EranBot reporting page and check a few of the flagged concerns. Comments welcome regarding potential improvements. These likely copyright violations can be searched by WikiProject categories. Use "control-f" to jump to your area of interest.--Lucas559 (talk) 22:39, 25 June 2015 (UTC)

ACS Annual Meeting 2015 Boston
I would like to inform our colleagues from the enwp about a lecture at the ACS Annual Meeting in august 2015 in Boston about a successful collabaration between the Georg-Thieme Verlag as holder of the Römpp Lexikon Chemie (a german online encyclopedia with focus on chemistry) and the german wikipedia chemistry project. Maybe here are some vistors of the meeting and are interested in this collabaration: Wikipedia and Chemistry: Collaborations in Science and Education. --Codc (talk) 13:15, 26 June 2015 (UTC)
 * A 'Notable Chemists and Chemistry' themed edit-a-thon is planned for the ACS National Meeting in Boston. Participants in WikiProject Chemistry are invited to join us on August 19, 2015, from 1:30 to 5:30, in person or remotely (registration required; see details on event page). If anyone plans to attend and is willing to volunteer as a trainer, please contact me on my talk page. This event is sponsored by the American Chemical Society (ACS) Office of Public Affairs, ACS Division of Chemical Information, and ACS Committee on Public Relations and Communications. KLindblom (talk) 20:46, 30 June 2015 (UTC)
 * Thanks, User:Codc, User:KLindblom! Also, I'd like to remind folks that there is a technical session on Wikipedia & Chemistry at the Boston ACS meeting, Room 104a on the afternoon of Sunday, August 16th.  Walkerma (talk) 01:18, 1 July 2015 (UTC)
 * Sorry, I didn't realise that Codc's link was for a talk in the same session; however, my alternate link may be useful for some. Walkerma (talk) 01:29, 1 July 2015 (UTC)
 * Reminder: A 'Notable Chemists and Chemistry' themed edit-a-thon is planned for Wednesday, August 19, 2015, from 1:30 to 5:30 p.m. EDT. Participants in WikiProject Chemistry are invited to join us, in person in Boston or remotely. (Registration required; see details on event page.) — Preceding unsigned comment added by KLindblom (talk • contribs) 21:00, 10 August 2015 (UTC)
 * This Edit-a-thon is now starting. If you want to join us, please come to irc://chat.freenode.net:8001/wikichem.  Walkerma (talk) 17:36, 19 August 2015 (UTC)

Phosphorus pentoxide
Would someone please check this edit at Phosphorus pentoxide. I'm guessing it's reasonable, and the error in the infobox for "Melting point" would be fixed by moving the new "sublimes" from MeltingPtC to MeltingPt. However, someone with more of a clue should do that. Johnuniq (talk) 07:06, 28 June 2015 (UTC)
 * You are correct, J. Done. I assumed that "sublimes" fact is chemically correct. MeltingPtC takes a number (Celcius), MeltingPt and MeltingPt_notes take any text (shown as prefix, suffix). -DePiep (talk) 11:28, 28 June 2015 (UTC)

Merging process to finish
A Merging process was initiated since 18 months for Chemotactic peptide and N-Formylmethionine-leucyl-phenylalanine. How can I finish the merge process ? Thanks Snipre (talk) 10:43, 4 July 2015 (UTC)
 * ✅ I merged what little unique material that was in Chemotactic peptide into N-Formylmethionine-leucyl-phenylalanine and turned the former into a redirect page. Boghog (talk) 11:43, 4 July 2015 (UTC)

Same articles ?
Do you think these two articles Norlevorphanol and 3-Hydroxymorphinan are about the same topic and can be merged ? Snipre (talk) 19:30, 8 July 2015 (UTC)
 * They are not literally "the same", but I agree they should be merged. Norlevorphanol is one of the two enantiomers of which 3-Hydroxymorphinan is the racemic mixture. There is apparently little (at this time) to say about the (–) isomer...actually the two sentences in the racemic-mixture article say more than the article specifically about this one! DMacks (talk) 20:51, 8 July 2015 (UTC)
 * Thanks for the small difference I didn't see. So if there is a difference we can keep them in my opinion. Snipre (talk) 07:43, 9 July 2015 (UTC)

AfC submission - 06/07/15
Draft:Forces between polymer-coated surfaces. Thank you for your input beforehand. Best, FoCuSandLeArN (talk) 02:26, 7 July 2015 (UTC)

cast iron black oxiding
Hi please let me know cast iron blackening process,and how efficient this process — Preceding unsigned comment added by 65.121.44.50 (talk) 07:15, 14 July 2015 (UTC)

Nomination for deletion of Template:Recent changes in WikiProject Chemistry
Template:Recent changes in WikiProject Chemistry has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for discussion page. In favor of original Recent changes in Chemistry -DePiep (talk) 15:30, 18 July 2015 (UTC)

Draft:Catalytic Carbonyl Addition through Transfer Hydrogenation
Dear chemists: This old draft will soon be deleted as stale. Is this a notable topic? If so, I am willing to remove the promotional language. However, not being a chemist I can't fix any other problems it may have (for example, being original research).&mdash;Anne Delong (talk) 13:02, 19 August 2015 (UTC)
 * blatant Krische promotion. Best delete. Note that in the past I have been more than happy to help you out so it is not laziness V8rik (talk) 17:38, 19 August 2015 (UTC)
 * I don't think it is a notable topic. It is a very small niche topic.  The content of the article is problematic as well.  I thought at first that some of the content could be saved by merging into an existing article, but as the AFC reviewer and V8rik above note, the article is highly promotional and focuses entirely on one professor's research to exclusion of any related research by other groups - and it does so in an a very subjective manner.  If someone wants to include content about this topic in Wikipedia, I honestly think it would be better to delete this draft and just start over.  ChemNerd (talk) 17:44, 19 August 2015 (UTC)
 * Can the citations from the article be pulled, and added to an existing article, as further reading? So what is good might yet be distilled out? If so, perhaps create a Talk section and collapse top and bottom, and add the text, if not to intrusive, at the same article. Cheers, Le Prof 71.201.62.200 (talk) 23:43, 21 August 2015 (UTC)
 * Well, it's gone now, deleted as a stale draft. If anyone wanted to do something with the references, I can retrieve them and drop them on his or her user talk page. Otherwise, I think our work is done here... Thanks. &mdash;Anne Delong (talk) 01:48, 22 August 2015 (UTC)

Other nonmetal
The redirects and, which currently point to Nonmetal are being discussed at RfD. Your input to the discussion at Redirects for discussion/Log/2015 August 20 is invited. Thryduulf (talk) 12:04, 20 August 2015 (UTC)

A draft at AFC needs help
Please help evaluate Draft:Multi oxidant solution. If you do not wish to, or know how to do a full AFC review, simply post your comment on the draft's talk page. Roger (Dodger67) (talk) 10:39, 30 August 2015 (UTC)

Mixed Oxidant
A new article has appeared, at Mixed Oxidant (which has the wrong capitalization) It was moved from DRAFTspace by its creator, but needs cleanup -- 70.51.202.113 (talk) 04:42, 2 September 2015 (UTC)
 * The article was returned to DRAFTspace at draft:mixed oxidant (now with correct capitalization) -- 70.51.202.113 (talk) 04:53, 3 September 2015 (UTC)

Recent changes in WP:chemistry
FWIW: I've made and updated

-DePiep (talk) 03:02, 1 July 2015 (UTC)

Acetol
Can any editors following this page help out with a possible issue I spotted with acetol? This is a redirect that was created by a bot (User:PotatoBot) back on 6 April 2011. The redirect history can be seen here. It was created as a 'redirect from trade name' to aspirin because at one point 'Acetol' was a trade name for this drug (in Canada, I think). At least twice (in December 2013 on the talk page, and in September 2014 on the redirect page), IP editors have tried to point out that acetol is also the name for a chemical that has the molecular formula C3H6O2. The linear formula is CH3COCH2OH and it has various other names as well, including 1-Hydroxy-2-propanone and 1-hydroxyacetone (it is listed under the latter name at C3H6O2). I tried and failed to find it with its own article under any name on Wikipedia, but may have missed something somewhere. The Sigma Aldrich page for it is here. I also found an entry in a 1990s book that gives three meanings for 'acetol' (see here). It might also have been the name for an airline fuel as well (though the references there are confusing). Some people also confuse it with acetal and acetyl. So my question is whether the primary 'acetol' page should be about the CH3COCH2OH chemical (instead of the current redirect) and what to do about the other meanings for this name? Am pinging User:Magioladitis in case they want to comment (they reverted the 2014 attempt to point out the problem with the redirect). Carcharoth (talk) 04:39, 2 July 2015 (UTC)
 * acetol &#8801; hydroxyacetone &#8801; 1-hydroxy-2-propanone. A Google search suggests that hydroxyacetone is the primary topic although not overwhelmingly.  The problem of course is that we currently do not have a hydroxyacetone article.  The best solution is probably to create a hydroxyacetone stub and convert acetol into a disambiguation page. Boghog (talk) 05:23, 2 July 2015 (UTC)
 * Carcharoth I reverted the edit for two reasons: The redirect was altered from targeting a blue link to a red link and references are not allowed in redirects. So mainly was a technical revert and not an opinion about page naming. -- Magioladitis (talk) 05:54, 2 July 2015 (UTC)
 * I created hydroxyacetone for this chemical (name chosen because the numbers are superfluous and not always used in literature and likewise acetone is more common than propanone), converted acetol to a disambiguation page, and updated the inbound links to it (all of which wanted the hydroxyacetone meaning!). Feel free to create additional redirects as appropriate. DMacks (talk) 08:04, 2 July 2015 (UTC)
 * Many thanks for that. Much appreciated. Carcharoth (talk) 23:38, 2 July 2015 (UTC)

kcat/KM
The specificity constant stub page ($$k_{cat}/K_{M}$$, kinetic efficiency) really needs someone to have a look through it to check the maths and add references. It could definitely benefit from a chemist's eye. T.Shafee(Evo&#65120;Evo)talk 02:21, 3 July 2015 (UTC)
 * I'm not really into enzymes, but I've fixed a problem with the steady state expression. --99of9 (talk) 02:58, 3 July 2015 (UTC)
 * The text also needs a lot of work. Since there is already Michaelis–Menten kinetics article, I think a lot of the material in specificity constant article is redundant and should be removed. I have gone ahead and simplified and rewrote much of the article.  Hopefully the revised version is clearer and more accurate. Boghog (talk) 06:21, 3 July 2015 (UTC)

Problem with two articles
I have a problem to distinguish 2 articles: As I understand the case, one is an isomer mixture and the other one is a pure isomer. But I can' define who's who. According to PubChem, Dipalmitoylphosphatidylcholine is the pure isomer (see here) and Colfosceril palmitate is the mixture (see here). But according to ChemIDPlus this is the inverse: see here and there. Can someone provide some other sources to define who is right ? Thanks Snipre (talk) 10:26, 4 July 2015 (UTC)
 * Dipalmitoylphosphatidylcholine
 * Colfosceril palmitate

Boiling point of Caryophyllene
This edit at Caryophyllene changed BoilingPtF from "262 to 264" to "514?" with an edit summary that makes me think the "262 to 264" should have been BoilingPtC. Can someone please check this and fix it because the question mark breaks the template. Johnuniq (talk) 10:50, 10 July 2015 (UTC)

Wikiquote competition
As Wikimedian in Residence at the Royal Society of Chemistry, I'm working with our Wikiquote colleagues to raise awareness of that project, though a competition to source quotes about chemistry. Your participation would be welcome. Andy Mabbett ( Pigsonthewing ); Talk to Andy; Andy's edits 11:13, 10 July 2015 (UTC)

Help needed at Oxazolone
I'd be grateful if someone could cast an eye over at oxazolone as I've become a bit confused by it. The ring has several structural isomers, so it can be either a lactam or a lactone (apparently). There's also an overlap with the azlactone functional group. I don't have much to work with here and I'm worried about unintentionally straying into WP:Synth. --Project Osprey (talk) 15:57, 17 July 2015 (UTC)