35 mm grenade

The 35 mm grenade is a type of grenade launcher ammunition of Chinese origin. The type consists of many high-velocity and low-velocity grenades with a caliber of 35 mm.

History
Thirty-five millimeter grenades are proprietary designs originating from China. In the 1980s, China began to experiment with different types of grenade launchers. Chinese designers felt Soviet 30 mm grenades had inadequate firepower, while NATO 40 mm grenades lacked portability, resulting in the adoption of 35 mm grenades for their grenade launchers, such as the QLZ-87 and QLZ-04.

35×32 mm Type 87
The 35 mm Type 87 is a series of high velocity grenades designed for Type 87 grenade launchers and other automatic grenade launchers. The grenades are stabilized with spin rifling. The Type 87 has a typical grenade design with the propellant stored in the base, the warhead in the middle and the fuse in the nose section. The grenade is semi-rimmed with a relatively short case.

The shells are stored in an ammo box or attached to a belt. In additional to the Type 87, the ammo can also be used by the Type 04 automatic grenade launcher. The QLB-06, also known as the QLZ-87B, is an improved version of the Type 87 grenade launcher and shares its ammunition.

Various warhead types are available for 35×32mmSR Type 87s:
 * DFS-87 : Anti-personnel fragmentation grenade with HE-frag warhead
 * DFJ-87 : Dual purpose, armor-piercing grenade with HEAT warhead
 * DFR-87 : Incendiary grenade
 * DFN-87 : Anti-personnel fragmentation incendiary grenade
 * DFD-87 : Smoke/marker grenade, with colored smoke

Type 87 cartridge Specification:
 * Weight: 217-250 g
 * Muzzle velocity: 190 m/s
 * Maximum range: 1750 m
 * Blast radius: 11 m
 * Penetration: 80 mm of RHA

35×32 mm Type 11
The QLU-11 utilizes a new version of the 35×32mmSR (through old types are compatible). New ammunition is specifically designed for long range accuracy. Type 11 long range cartridges are derived from the DFJ-87 armor-piercing grenades, but the weights are reduced from 217 to 200 g due to lighter casings. Propellant takes a larger percentage of the cartridge space, thus improving the velocity from 195 to 320 m/s. This modification greatly increases the recoil, which QLU-11 features advanced primer ignition (API) blowback to mitigate.

35×115 mm Type 91
The 35×115 mm Type 91 grenades are a series of low velocity grenades designed for the Type 91 grenade launcher, which comes with shoulder-launched, rifle-attached, and vehicle-mounted variants. The cartridge has a conventional design for breech loading similar to NATO 40 mm low velocity grenades.

Various warhead types are available for 35×115 mm Type 91, including:
 * DFB-91 : Stun grenade
 * DFT-91 : Sting grenade
 * DFR-91 : Paintball grenade
 * DFC-91 : Tear gas
 * DFG-91 : Flashbang

35 mmCL Type 10
Type 10 is a series of low-velocity grenades designed for the QLG-10 and QLG-10A rifle-attached grenade launchers. Standard Type 10 projectiles are caseless, and weigh 169 g with muzzle velocities of 78 m/s. Type 10 grenades utilize high-low cartridges designed for low recoil operation with extended range. The grenade has an effective range of 400 m.

Various warhead types are available for the 35 mmCL Type 10, including:
 * DFS-10 : High-explosive fragmentation grenade. Effective against infantry personal inside 400 m range.
 * DFS-10A : Bouncing air-burst fragmentation grenade with 400 m range. Equipped with pre-set airburst munition and jump-up detonation fuse, similar to the US M397A1 40 mm cartridge.
 * DFJ-10 : High-explosive dual purpose grenade that is effective against infantry personnel inside a 400 m range, as well as against light vehicles in a 100 m range
 * DFX-10 : Trajectory marker grenade with 400 m range, can be used for trajectory adjustment for other grenade types
 * DFD-10 : Smoke grenade with 400 m range, with colored smoke available