6N14P

The 6N14P (Russian: 6Н14П) is a miniature Russian-made medium gain dual triode vacuum tube, intended for service as a low-noise cascode amplifier at HF through VHF frequencies. It is a direct equivalent of ECC84 and 6CW7 vacuum tubes. The construction of the tube is asymmetrical, with the control grid of the first triode section (pin no. 2) being internally connected to the internal RF shielding plate, thereby making the first section more suitable for common grid operation.

Basic data
Uf = 6.3V, If = 350 mA uM = 25 Ia = 10.5 mA S = 6.8 mA/V Pa = 1.5 W

History of Use
In the Soviet Union 6N14P found application in the tuner section of commercial TV sets as the cascode RF front-end amplifier stage, as well as in special equipment and to a lesser extent in more-expensive FM receivers and television sets in the 1960s. However, in the majority of medium and low-grade Soviet-produced FM radios a more general purpose 6N3P (2C51) vacuum tube was utilized, as the lower frequency OIRT FM band used in the USSR (65.8 to 74 MHz) allowed for less stringent noise figure requirements towards the receiver design and its components than the higher frequency Western FM broadcast band (87.5-108 MHz) used in most of the rest of the world.

Currently, like many other vacuum tubes, 6N14P has found some use with DIY audio enthusiasts.