Agricultural pollution



Agricultural pollution refers to biotic and abiotic byproducts of farming practices that result in contamination or degradation of the environment and surrounding ecosystems, and/or cause injury to humans and their economic interests. The pollution may come from a variety of sources, ranging from point source water pollution (from a single discharge point) to more diffuse, landscape-level causes, also known as non-point source pollution and air pollution. Once in the environment these pollutants can have both direct effects in surrounding ecosystems, i.e. killing local wildlife or contaminating drinking water, and downstream effects such as dead zones caused by agricultural runoff is concentrated in large water bodies.

Management practices, or ignorance of them, play a crucial role in the amount and impact of these pollutants. Management techniques range from animal management and housing to the spread of pesticides and fertilizers in global agricultural practices, which can have major environmental impacts. Bad management practices include poorly managed animal feeding operations, overgrazing, plowing, fertilizer, and improper, excessive, or badly timed use of pesticides.

Pollutants from agriculture greatly affect water quality and can be found in lakes, rivers, wetlands, estuaries, and groundwater. Pollutants from farming include sediments, nutrients, pathogens, pesticides, metals, and salts. Animal agriculture has an outsized impact on pollutants that enter the environment. Bacteria and pathogens in manure can make their way into streams and groundwater if grazing, storing manure in lagoons and applying manure to fields is not properly managed. Air pollution caused by agriculture through land use changes and animal agriculture practices have an outsized impact on climate change, and addressing these concerns was a central part of the IPCC Special Report on Climate Change and Land. Mitigation of agricultural pollution is a key component in the development of a sustainable food system.

Pesticides
It has been approximated that in the absence of pest control measures, crop losses before harvesting would typically amount to 40 percent. Persistence is a major issue. For example 2,4-D and atrazine have with lifetimes up to 20 years—such as DDT, aldrin, dieldrin, endrin, heptachlor, and toxaphene), or even permanent (as seen in substances like lead, mercury, and arsenic). The extent to which the pesticides and herbicides persist depends on the compound's unique chemistry, which affects sorption dynamics and resulting fate and transport in the soil environment. Pesticides can also accumulate in animals that eat contaminated pests and soil organisms. The primary danger associated with pesticide application lies in its impact on non-target organisms. These encompass species we typically perceive as beneficial or desirable, such as pollinators, and to natural enemies of pests (i.e. insects that prey on or parasitize pests).

In principle Biopesticides pesticides, derived from natural sources, could reduce overall agricultural pollution. Their utilization is modest. Furthermmore,t biopesticides often suffer the same negative impacts as synthetic pesticides. In the United States, biopesticides are subject to fewer environmental regulations. Many biopesticides are permitted under the National Organic Program, United States Department of Agriculture, standards for organic crop production.

Pesticide leaching
Pesticide leaching occurs when pesticides dissolve in water, and these solutions migrate to off-target sites. Leaching is a major source of groundwater pollution. Leaching is affected by the soil, the pesticide, and rainfall and irrigation. Leaching is most likely to happen if using a water-soluble pesticide, when the soil tends to be sandy in texture; if excessive watering occurs just after pesticide application; if the adsorption ability of the pesticide to the soil is low. Leaching may not only originate from treated fields, but also from pesticide mixing areas, pesticide application machinery washing sites, or disposal areas.

Fertilizers
Fertilizers are used to provide crops with additional sources of nutrients, such as nitrogen, phosphorus, and potassium, that promote plant growth and increase crop yields. While they are beneficial for plant growth, they can also disrupt natural nutrient and mineral biogeochemical cycles and pose risks to human and ecological health.

Nitrogen
Most common nitrogen sources are NO3− (nitrate) and NH4+ (ammonium). These fertilizers have greatly increased the productivity of agricultural land: "With average crop yields remaining at the 1900 level the crop harvest in the year 2000 would have required nearly four times more land and the cultivated area would have claimed nearly half of all ice-free continents, rather than under 15% of the total land area that is required today."

Although leading to increased crop yield, nitrogen fertilizers can also negatively affect groundwater and surface waters, pollute the atmosphere, and degrade soil health. Not all nutrient applied through fertilizer are taken up by the crops, and the remainder accumulates in the soil or is lost as runoff. Nitrate fertilizers are much more likely to be lost to the soil profile through runoff because of its high solubility and like charges between the molecule and negatively charged clay particles. High application rates of nitrogen-containing fertilizers combined with the high water-solubility of nitrate leads to increased runoff into surface water as well as leaching into groundwater, thereby causing groundwater pollution. Nitrate levels above 10 mg/L (10 ppm) in groundwater can cause "blue baby syndrome" (acquired methemoglobinemia) in infants and possibly thyroid disease and various types of cancer. Nitrogen fixation, which converts atmospheric nitrogen (N2) to ammonia, and denitrification, which converts biologically available nitrogen compounds to N2 and N2O, are two of the most important metabolic processes involved in the nitrogen cycle because they are the largest inputs and outputs of nitrogen to ecosystems. They allow nitrogen to flow between the atmosphere, which is around 78% nitrogen) and the biosphere. Other significant processes in the nitrogen cycle are nitrification and ammonification which convert ammonium to nitrate or nitrite and organic matter to ammonia respectively. Because these processes keep nitrogen concentrations relatively stable in most ecosystems, a large influx of nitrogen from agricultural runoff can cause serious disruption. A common result of this in aquatic ecosystems is eutrophication, which in turn creates hypoxic and anoxic conditions – both of which are deadly and/or damaging to many species. Nitrogen fertilization can also release NH3 gases into the atmosphere which can then be converted into NOx compounds. A greater amount of NOx compounds in the atmosphere can result in the acidification of aquatic ecosystems and cause various respiratory issues in humans. Fertilization can also release N2O which is a greenhouse gas and can facilitate the destruction of ozone (O3) in the stratosphere. Soils that receive nitrogen fertilizers can also be damaged. An increase in plant available nitrogen will increase a crop's net primary production, and eventually, soil microbial activity will increase as a result of the larger inputs of nitrogen from fertilizers and carbon compounds through decomposed biomass. Because of the increase in decomposition in the soil, its organic matter content will be depleted which results in lower overall soil health.

Phosphorus
The most common form of phosphorus fertilizer used in agricultural practices is phosphate (PO43-), and it is applied in synthetic compounds that incorporate PO43- or in organic forms such as manure and compost. Phosphorus is an essential nutrient in all organisms because of the roles it plays in cell and metabolic functions such as nucleic acid production and metabolic energy transfers. However, most organisms, including agricultural crops, only require a small amount of phosphorus because they have evolved in ecosystems with relatively low amounts of it. Microbial populations in soils are able to convert organic forms of phosphorus to soluble plant available forms such as phosphate. This step is generally bypassed with inorganic fertilizers because it is applied as phosphate or other plant available forms. Any phosphorus that is not taken up by plants is adsorbed to soil particles which helps it remain in place. Because of this, it typically enters surface waters when the soil particles it is attached to are eroded as a result of precipitation or stormwater runoff. The amount that enters surface waters is relatively low in comparison to the amount that is applied as fertilizer, but because it acts as a limiting nutrient in most environments, even a small amount can disrupt an ecosystem's natural phosphorus biogeochemical cycles. Although nitrogen plays a role in harmful algae and cyanobacteria blooms that cause eutrophication, excess phosphorus is considered the largest contributing factor due to the fact that phosphorus is often the most limiting nutrient, especially in freshwaters. In addition to depleting oxygen levels in surface waters, algae and cyanobacteria blooms can produce cyanotoxins which are harmful to human and animal health as well as many aquatic organisms.

The concentration of cadmium in phosphorus-containing fertilizers varies considerably and can be problematic. For example, mono-ammonium phosphate fertilizer may have a cadmium content of as low as 0.14 mg/kg or as high as 50.9 mg/kg. This is because the phosphate rock used in their manufacture can contain as much as 188 mg/kg cadmium (examples are deposits on Nauru and the Christmas islands). Continuous use of high-cadmium fertilizer can contaminate soil and plants. Limits to the cadmium content of phosphate fertilizers has been considered by the European Commission. Producers of phosphorus-containing fertilizers now select phosphate rock based on the cadmium content. Phosphate rocks contain high levels of fluoride. Consequently, the widespread use of phosphate fertilizers has increased soil fluoride concentrations. It has been found that food contamination from fertilizer is of little concern as plants accumulate little fluoride from the soil; of greater concern is the possibility of fluoride toxicity to livestock that ingest contaminated soils. Also of possible concern are the effects of fluoride on soil microorganisms. The radioactive content of the fertilizers varies considerably and depends both on their concentrations in the parent mineral and on the fertilizer production process. Uranium-238 concentrations range can range from 7 to 100 pCi/g in phosphate rock and from 1 to 67 pCi/g in phosphate fertilizers. Where high annual rates of phosphorus fertilizer are used, this can result in uranium-238 concentrations in soils and drainage waters that are several times greater than are normally present. However, the impact of these increases on the risk to human health from radionuclide contamination of foods is very small (less than 0.05 mSv/y).
 * Radioactive elements

From machinery
Farm machinery and equipment emitting substantial quantities of harmful gases.

Soil erosion and sedimentation
Agriculture contributes greatly to soil erosion and sediment deposition through intensive management or inefficient land cover. It is estimated that agricultural land degradation is leading to an irreversible decline in fertility on about 6 million ha of fertile land each year. The accumulation of sediments (i.e. sedimentation) in runoff water affects water quality in various ways. Sedimentation can decrease the transport capacity of ditches, streams, rivers, and navigation channels. It can also limit the amount of light penetrating the water, which affects aquatic biota. The resulting turbidity from sedimentation can interfere with feeding habits of fishes, affecting population dynamics. Sedimentation also affects the transport and accumulation of pollutants, including phosphorus and various pesticides.

Tillage and nitrous oxide emissions
Natural soil biogeochemical processes result in the emission of various greenhouse gases, including nitrous oxide. Agricultural management practices can affect emission levels. For example, tillage levels have also been shown to affect nitrous oxide emissions.

Organic contaminants
Manures and biosolids, although having value as fertilizers, they may also contain contaminants, including pharmaceuticals and personal care products (PPCPs). A wide variety and vast quantity of PPCPs consumed by animals.

Greenhouse gases from fecal waste
The United Nations Food and Agriculture Organization (FAO) predicted that 18% of anthropogenic greenhouse gases come directly or indirectly from the world's livestock. This report also suggested that the emissions from livestock were greater than that of the transportation sector. While livestock do currently play a role in producing greenhouse gas emissions, the estimates have been argued to be a misrepresentation. While the FAO used a life-cycle assessment of animal agriculture (i.e. all aspects including emissions from growing crops for feed, transportation to slaughter, etc.), they did not apply the same assessment for the transportation sector.

Alternate sources claim that FAO estimates are too low, stating that the global livestock industry could be responsible for up to 51% of emitted atmospheric greenhouse gasses rather than 18%. Critics say the difference in estimates come from the FAO's use of outdated data. Regardless, if the FAO's report of 18% is accurate, that still makes livestock the second-largest greenhouse-gas-polluter.

A PNAS model showed that even if animals were completely removed from U.S. agriculture and diets, U.S. GHG emissions would be decreased by 2.6% only (or 28% of agricultural GHG emissions). This is because of the need replace animal manures by fertilizers and to replace also other animal coproducts, and because livestock now use human-inedible food and fiber processing byproducts. Moreover, people would suffer from a greater number of deficiencies in essential nutrients although they would get a greater excess of energy, possibly leading to greater obesity.

Invasive species
The increasing globalization of agriculture has resulted in the accidental transport of pests, weeds, and diseases to novel ranges. If they establish, they become an invasive species that can impact populations of native species and threaten agricultural production. For example, the transport of bumblebees reared in Europe and shipped to the United States and/or Canada for use as commercial pollinators has led to the introduction of an Old World parasite to the New World. This introduction may play a role in recent native bumble bee declines in North America. Agriculturally introduced species can also hybridize with native species resulting in a decline in genetic biodiversity and threaten agricultural production.

Habitat disturbance associated with farming practices themselves can also facilitate the establishment of these introduced organisms. Contaminated machinery, livestock and fodder, and contaminated crop or pasture seed can also lead to the spread of weeds.

Quarantines (see biosecurity) are one way in which prevention of the spread of invasive species can be regulated at the policy level. A quarantine is a legal instrument that restricts the movement of infested material from areas where an invasive species is present to areas in which it is absent. The World Trade Organization has international regulations concerning the quarantine of pests and diseases under the Agreement on the Application of Sanitary and Phytosanitary Measures. Individual countries often have their own quarantine regulations. In the United States, for example, the United States Department of Agriculture/Animal and Plant Health Inspection Service (USDA/APHIS) administers domestic (within the United States) and foreign (importations from outside the United States) quarantines. These quarantines are enforced by inspectors at state borders and ports of entry.

Biological control
The use of biological pest control agents, or using predators, parasitoids, parasites, and pathogens to control agricultural pests, has the potential to reduce agricultural pollution associated with other pest control techniques, such as pesticide use. The merits of introducing non-native biocontrol agents have been widely debated, however. Once released, the introduction of a biocontrol agent can be irreversible. Potential ecological issues could include the dispersal from agricultural habitats into natural environments, and host-switching or adapting to utilize a native species. In addition, predicting the interaction outcomes in complex ecosystems and potential ecological impacts prior to release can be difficult. One example of a biocontrol program that resulted in ecological damage occurred in North America, where a parasitoid of butterflies was introduced to control gypsy moth and browntail moth. This parasitoid is capable of utilizing many butterfly host species, and likely resulted in the decline and extirpation of several native silk moth species.

International exploration for potential biocontrol agents is aided by agencies such as the European Biological Control Laboratory, the United States Department of Agriculture/Agricultural Research Service (USDA/ARS), the Commonwealth Institute of Biological Control, and the International Organization for Biological Control of Noxious Plants and Animals. In order to prevent agricultural pollution, quarantine and extensive research on the organism's potential efficacy and ecological impacts are required prior to introduction. If approved, attempts are made to colonize and disperse the biocontrol agent in appropriate agricultural settings. Continual evaluations on their efficacy are conducted.

Genetic contamination and ecological effects
GMO crops can, however, result in genetic contamination of native plant species through hybridization. This could lead to increased weediness of the plant or the extinction of the native species. In addition, the transgenic plant itself may become a weed if the modification improves its fitness in a given environment.

There are also concerns that non-target organisms, such as pollinators and natural enemies, could be poisoned by accidental ingestion of Bt-producing plants. A recent study testing the effects of Bt corn pollen dusting nearby milkweed plants on larval feeding of the monarch butterfly found that the threat to populations of the monarch was low.

The use of GMO crop plants engineered for herbicide resistance can also indirectly increase the amount of agricultural pollution associated with herbicide use. For example, the increased use of herbicide in herbicide-resistant corn fields in the mid-western United States is decreasing the amount of milkweeds available for monarch butterfly larvae.

Regulation of the release of genetic modified organisms vary based on the type of organism and the country concerned.

GMO as a tool of pollution reduction
While there may be some concerns regarding the use of GM products, it may also be the solution to some of the existing animal agriculture pollution issues. One of the main sources of pollution, particularly vitamin and mineral drift in soils, comes from a lack of digestive efficiency in animals. By improving digestive efficiency, it is possible to minimize both the cost of animal production and the environmental damage. One successful example of this technology and its potential application is the Enviropig.

The Enviropig is a genetically modified Yorkshire pig that expresses phytase in its saliva. Grains, such as corn and wheat, have phosphorus that is bound in a naturally indigestible form known as phytic acid. Phosphorus, an essential nutrient for pigs, is then added to the diet, since it can not be broken down in the pigs digestive tract. As a result, nearly all of the phosphorus naturally found in the grain is wasted in the feces, and can contribute to elevated levels in the soil. Phytase is an enzyme that is able to break down the otherwise indigestible phytic acid, making it available to the pig. The ability of the Enviropig to digest the phosphorus from the grains eliminates the waste of that natural phosphorus (20-60% reduction), while also eliminating the need to supplement the nutrient in feed.

Manure management
One of the main contributors to air, soil and water pollution is animal waste. According to a 2005 report by the USDA, more than 335–million tons of "dry matter" waste (the waste after water is removed) is produced annually on farms in the United States. Animal feeding operations produce about 100 times more manure than the amount of human sewage sludge processed in US municipal waste water plants each year. Diffuse source pollution from agricultural fertilizers is more difficult to trace, monitor and control. High nitrate concentrations are found in groundwater and may reach 50 mg/litre (the EU Directive limit). In ditches and river courses, nutrient pollution from fertilizers causes eutrophication. This is worse in winter, after autumn ploughing has released a surge of nitrates; winter rainfall is heavier increasing runoff and leaching, and there is lower plant uptake. EPA suggests that one dairy farm with 2,500 cows produces as much waste as a city with around 411,000 residents. The US National Research Council has identified odors as the most significant animal emission problem at the local level. Different animal systems have adopted several waste management procedures to deal with the large amount of waste produced annually.

The advantages of manure treatment are a reduction in the amount of manure that needs to be transported and applied to crops, as well as reduced soil compaction. Nutrients are reduced as well, meaning that less cropland is needed for manure to be spread upon. Manure treatment can also reduce the risk of human health and biosecurity risks by reducing the amount of pathogens present in manure. Undiluted animal manure or slurry is one hundred times more concentrated than domestic sewage, and can carry an intestinal parasite, Cryptosporidium, which is difficult to detect but can be passed to humans. Silage liquor (from fermented wet grass) is even stronger than slurry, with a low pH and very high biological oxygen demand. With a low pH, silage liquor can be highly corrosive; it can attack synthetic materials, causing damage to storage equipment, and leading to accidental spillage. All of these advantages can be optimized by using the right manure management system on the right farm based on the resources that are available.

Composting
Composting is a solid manure management system that relies on solid manure from bedded pack pens, or the solids from a liquid manure separator. There are two methods of composting, active and passive. Manure is churned periodically during active composting, whereas in passive composting it is not. Passive composting has been found to have lower green house gas emissions due to incomplete decomposition and lower gas diffusion rates.

Solid-liquid separation
Manure can be mechanically separated into a solid and liquid portion for easier management. Liquids (4–8% dry matter) can be used easily in pump systems for convenient spread over crops and the solid fraction (15–30% dry matter) can be used as stall bedding, spread on crops, composted or exported.

Anaerobic digestion and lagoons
Anaerobic digestion is the biological treatment of liquid animal waste using bacteria in an area absent of air, which promotes the decomposition of organic solids. Hot water is used to heat the waste in order to increase the rate of biogas production. The remaining liquid is nutrient rich and can be used on fields as a fertilizer and methane gas that can be burned directly on the biogas stove or in an engine generator to produce electricity and heat. Methane is about 20 times more potent as a greenhouse gas than carbon dioxide, which has significant negative environmental effects if not controlled properly. Anaerobic treatment of waste is the best method for controlling the odor associated with manure management.

Biological treatment lagoons also use anaerobic digestion to break down solids, but at a much slower rate. Lagoons are kept at ambient temperatures as opposed to the heated digestion tanks. Lagoons require large land areas and high dilution volumes to work properly, so they do not work well in many climates in the northern United States. Lagoons also offer the benefit of reduced odor and biogas is made available for heat and electric power.

Studies have demonstrated that GHG emissions are reduced using aerobic digestion systems. GHG emission reductions and credits can help compensate for the higher installation cost of cleaner aerobic technologies and facilitate producer adoption of environmentally superior technologies to replace current anaerobic lagoons.