Misleading graph



In statistics, a misleading graph, also known as a distorted graph, is a graph that misrepresents data, constituting a misuse of statistics and with the result that an incorrect conclusion may be derived from it.

Graphs may be misleading by being excessively complex or poorly constructed. Even when constructed to display the characteristics of their data accurately, graphs can be subject to different interpretations, or unintended kinds of data can seemingly and ultimately erroneously be derived.

Misleading graphs may be created intentionally to hinder the proper interpretation of data or accidentally due to unfamiliarity with graphing software, misinterpretation of data, or because data cannot be accurately conveyed. Misleading graphs are often used in false advertising. One of the first authors to write about misleading graphs was Darrell Huff, publisher of the 1954 book How to Lie with Statistics.

The field of data visualization describes ways to present information that avoids creating misleading graphs.

Misleading graph methods
There are numerous ways in which a misleading graph may be constructed.

Excessive usage
The use of graphs where they are not needed can lead to unnecessary confusion/interpretation. Generally, the more explanation a graph needs, the less the graph itself is needed. Graphs do not always convey information better than tables.

Biased labeling
The use of biased or loaded words in the graph's title, axis labels, or caption may inappropriately prime the reader.

Fabricated trends
Similarly, attempting to draw trend lines through uncorrelated data may mislead the reader into believing a trend exists where there is none. This can be both the result of intentionally attempting to mislead the reader or due to the phenomenon of illusory correlation.

Pie chart

 * Comparing pie charts of different sizes could be misleading as people cannot accurately read the comparative area of circles.
 * The usage of thin slices, which are hard to discern, may be difficult to interpret.
 * The usage of percentages as labels on a pie chart can be misleading when the sample size is small.
 * Making a pie chart 3D or adding a slant will make interpretation difficult due to distorted effect of perspective. Bar-charted pie graphs in which the height of the slices is varied may confuse the reader.

Comparing pie charts
Comparing data on barcharts is generally much easier. In the image below, it is very hard to tell where the blue sector is bigger than the green sector on the piecharts.

3D Pie chart slice perspective
A perspective (3D) pie chart is used to give the chart a 3D look. Often used for aesthetic reasons, the third dimension does not improve the reading of the data; on the contrary, these plots are difficult to interpret because of the distorted effect of perspective associated with the third dimension. The use of superfluous dimensions not used to display the data of interest is discouraged for charts in general, not only for pie charts. In a 3D pie chart, the slices that are closer to the reader appear to be larger than those in the back due to the angle at which they're presented. This effect makes readers less performant in judging the relative magnitude of each slice when using 3D than 2D


 * {| class="wikitable"

! Misleading pie chart ! Regular pie chart Item C appears to be at least as large as Item A in the misleading pie chart, whereas in actuality, it is less than half as large. Item D looks a lot larger than item B, but they are the same size.
 * + Comparison of pie charts
 * Misleading Pie Chart.png
 * Sample Pie Chart.png
 * }
 * }

Edward Tufte, a prominent American statistician, noted why tables may be preferred to pie charts in The Visual Display of Quantitative Information: Tables are preferable to graphics for many small data sets. A table is nearly always better than a dumb pie chart; the only thing worse than a pie chart is several of them, for then the viewer is asked to compare quantities located in spatial disarray both within and between pies – Given their low data-density and failure to order numbers along a visual dimension, pie charts should never be used.

Improper scaling
Using pictograms in bar graphs should not be scaled uniformly, as this creates a perceptually misleading comparison. The area of the pictogram is interpreted instead of only its height or width. This causes the scaling to make the difference appear to be squared.
 * {| class="wikitable"

! Improper scaling ! Regular ! Comparison In the improperly scaled pictogram bar graph, the image for B is actually 9 times as large as A.
 * + Improper scaling of 2D pictogram in a bar graph
 * Improperly scaled picture graph.svg
 * Picture Graph.svg
 * Comparison of properly and improperly scaled picture graph.svg
 * }
 * }


 * {| class="wikitable"

! Square ! Circle ! Triangle The perceived size increases when scaling.
 * + 2D shape scaling comparison
 * Box scaling.svg
 * Circle scaling.svg
 * Triangle scaling.svg
 * }
 * }

The effect of improper scaling of pictograms is further exemplified when the pictogram has 3 dimensions, in which case the effect is cubed.


 * {| class="wikitable"

The graph of house sales (left) is misleading. It appears that home sales have grown eightfold in 2001 over the previous year, whereas they have actually grown twofold. Besides, the number of sales is not specified.
 * Graph showing improper 3D pictogram scaling.svg
 * }

An improperly scaled pictogram may also suggest that the item itself has changed in size.


 * {| class="wikitable"

! Misleading ! Regular Assuming the pictures represent equivalent quantities, the misleading graph shows that there are more bananas because the bananas occupy the most area and are furthest to the right.
 * Pictograph not aligned and different size.svg
 * Pictograph aligned and similar size.svg
 * }
 * }

Logarithmic scaling
Logarithmic (or log) scales are a valid means of representing data. But when used without being clearly labeled as log scales or displayed to a reader unfamiliar with them, they can be misleading. Log scales put the data values in terms of a chosen number (the base of the log) to a particular power. The base is often e (2.71828...) or 10. For example, log scales may give a height of 1 for a value of 10 in the data and a height of 6 for a value of 1,000,000 (10$6$) in the data. Log scales and variants are commonly used, for instance, for the volcanic explosivity index, the Richter scale for earthquakes, the magnitude of stars, and the pH of acidic and alkaline solutions. Even in these cases, the log scale can make the data less apparent to the eye. Often the reason for the use of log scales is that the graph's author wishes to display vastly different scales on the same axis. Without log scales, comparing quantities such as 10$3$ versus 10$9$ becomes visually impractical. A graph with a log scale that was not clearly labeled as such, or a graph with a log scale presented to a viewer who did not know logarithmic scales, would generally result in a representation that made data values look of similar size, in fact, being of widely differing magnitudes. Misuse of a log scale can make vastly different values (such as 10 and 10,000) appear close together (on a base-10 log scale, they would be only 1 and 4). Or it can make small values appear to be negative due to how logarithmic scales represent numbers smaller than the base.

Misuse of log scales may also cause relationships between quantities to appear linear whilst those relationships are exponentials or power laws that rise very rapidly towards higher values. It has been stated, although mainly in a humorous way, that "anything looks linear on a log-log plot with thick marker pen".


 * {| class="wikitable"

! Linear scale ! Logarithmic scale Both graphs show an identical exponential function of f(x) = 2x. The graph on the left uses a linear scale, showing clearly an exponential trend. The graph on the right, however uses a logarithmic scale, which generates a straight line. If the graph viewer were not aware of this, the graph would appear to show a linear trend.
 * + Comparison of linear and logarithmic scales for identical data
 * Linear scale.png
 * Logarithmic scale (2).png
 * }
 * }

Truncated graph
A truncated graph (also known as a torn graph) has a y axis that does not start at 0. These graphs can create the impression of important change where there is relatively little change.

While truncated graphs can be used to overdraw differences or to save space, their use is often discouraged. Commercial software such as MS Excel will tend to truncate graphs by default if the values are all within a narrow range, as in this example. To show relative differences in values over time, an index chart can be used. Truncated diagrams will always distort the underlying numbers visually. Several studies found that even if people were correctly informed that the y-axis was truncated, they still overestimated the actual differences, often substantially.


 * {| class="wikitable"

! Truncated bar graph ! Regular bar graph
 * + Truncated bar graph
 * Truncated Bar Graph.svg
 * Bar graph.svg
 * }
 * }

These graphs display identical data; however, in the truncated bar graph on the left, the data appear to show significant differences, whereas, in the regular bar graph on the right, these differences are hardly visible.

There are several ways to indicate y-axis breaks:
 * {| class="wikitable"


 * + Indicating a y-axis break
 * Bar graph break.svg
 * Y-axis break.svg
 * }
 * }

Axis changes

 * {| class="wikitable"

! Original graph ! Smaller maximum ! Larger maximum Changing the y-axis maximum affects how the graph appears. A higher maximum will cause the graph to appear to have less volatility, less growth, and a less steep line than a lower maximum.
 * + Changing y-axis maximum
 * Line graph1.svg
 * Line graph3.svg
 * Line graph2.svg
 * }
 * }


 * {| class="wikitable"

! Original graph ! Half-width, twice the height ! Twice width, half-height Changing the ratio of a graph's dimensions will affect how the graph appears.
 * + Changing ratio of graph dimensions
 * Line graph1.svg
 * Line graph1-3.svg
 * Line graph1-4.svg
 * }
 * }

No scale
The scales of a graph are often used to exaggerate or minimize differences.
 * {| class="wikitable"

! Less difference ! More difference The lack of a starting value for the y axis makes it unclear whether the graph is truncated. Additionally, the lack of tick marks prevents the reader from determining whether the graph bars are properly scaled. Without a scale, the visual difference between the bars can be easily manipulated.
 * + Misleading bar graph with no scale
 * Example truncated bar graph.svg
 * Bar graph missing zero1.svg
 * }
 * }


 * {| class="wikitable"

! Volatility ! Steady, fast growth ! Slow growth Though all three graphs share the same data, and hence the actual slope of the (x, y) data is the same, the way that the data is plotted can change the visual appearance of the angle made by the line on the graph. This is because each plot has a different scale on its vertical axis. Because the scale is not shown, these graphs can be misleading.
 * + Misleading line graph with no scale
 * No scale line graph1.svg
 * No scale line graph2.svg
 * No scale line graph3.svg
 * }
 * }

Improper intervals or units
The intervals and units used in a graph may be manipulated to create or mitigate change expression.

Omitting data
Graphs created with omitted data remove information from which to base a conclusion.
 * {| class="wikitable"

! Scatter plot with missing categories ! Regular scatter plot In the scatter plot with missing categories on the left, the growth appears to be more linear with less variation.
 * + Scatter plot with missing categories
 * Scatter Plot with missing categories.svg
 * A scatter plot without missing categories.svg
 * }
 * }

In financial reports, negative returns or data that do not correlate with a positive outlook may be excluded to create a more favorable visual impression.

3D
The use of a superfluous third dimension, which does not contain information, is strongly discouraged, as it may confuse the reader.

Complexity
Graphs are designed to allow easier interpretation of statistical data. However, graphs with excessive complexity can obfuscate the data and make interpretation difficult.

Poor construction
Poorly constructed graphs can make data difficult to discern and thus interpret.

Extrapolation
Misleading graphs may be used in turn to extrapolate misleading trends.

Measuring distortion
Several methods have been developed to determine whether graphs are distorted and to quantify this distortion.

Lie factor

 * $$\text{Lie factor}=\frac{\text{size of effect shown in graphic}}{\text{size of effect shown in data}},$$

where
 * $$\text{size of effect}=\left| \frac{\text{second value} - \text{first value}}{\text{first value}} \right|.$$

A graph with a high lie factor (>1) would exaggerate change in the data it represents, while one with a small lie factor (>0, <1) would obscure change in the data. A perfectly accurate graph would exhibit a lie factor of 1.

Graph discrepancy index

 * $$\text{graph discrepancy index}=100 \left(\frac{a}{b} - 1\right),$$

where
 * $$a=\text{percentage change depicted in graph},$$
 * $$b=\text{percentage change in data}.$$

The graph discrepancy index, also known as the graph distortion index (GDI), was originally proposed by Paul John Steinbart in 1998. GDI is calculated as a percentage ranging from −100% to positive infinity, with zero percent indicating that the graph has been properly constructed and anything outside the ±5% margin is considered to be distorted. Research into the usage of GDI as a measure of graphics distortion has found it to be inconsistent and discontinuous, making the usage of GDI as a measurement for comparisons difficult.

Data-ink ratio

 * $$\text{data-ink ratio}=\frac{\text{“ink” used to display the data}}{\text{total “ink” used to display the graphic}}$$

The data-ink ratio should be relatively high. Otherwise, the chart may have unnecessary graphics.

Data density

 * $$\text{data density}=\frac{\text{number of entries in data matrix}}{\text{area of data graphic}}$$

The data density should be relatively high, otherwise a table may be better suited for displaying the data.

Usage in finance and corporate reports
Graphs are useful in the summary and interpretation of financial data. Graphs allow trends in large data sets to be seen while also allowing the data to be interpreted by non-specialists.

Graphs are often used in corporate annual reports as a form of impression management. In the United States, graphs do not have to be audited, as they fall under AU Section 550 Other Information in Documents Containing Audited Financial Statements.

Several published studies have looked at the usage of graphs in corporate reports for different corporations in different countries and have found frequent usage of improper design, selectivity, and measurement distortion within these reports. The presence of misleading graphs in annual reports has led to requests for standards to be set.

Research has found that while readers with poor levels of financial understanding have a greater chance of being misinformed by misleading graphs, even those with financial understanding, such as loan officers, may be misled.

Academia
The perception of graphs is studied in psychophysics, cognitive psychology, and computational visions.