Talk:Computational fluid dynamics

Patankar?
Does Suhas Patankar warrant a mention in this article? If so, could someone more knowledgable than I whip up a sentence to do so. Thanks. -- John Fader 21:27, 17 Feb 2005 (UTC)

We need, I think, a paragraph or two at the beginning that explains CFD for the layman. Someone with no mathematical background coming to find out what CFD is all about needs some information before we start getting into discretization method. It should go first because if they don't get something they understand in the first paragraph they will stop reading. DJ Clayworth 11:20, 3 May 2005 (UTC)


 * I disagree, I think some mention of the most common discretization methods (a sort of "where to go" if you're interested in discretization methods) is definitely called for in the article (although I agree it doesn't belong in the introduction). For example, Patankar would be an excellent reference for the control volume subsection of the discretization section.  Finite volume, finite element, and particle methods would also be good to mention, since most discretization methods in use fall into one of these four categories.  If someone is qualified to add brief descriptions of another discretization method, that would be great.  In any case, each would be a short description linking to a main article. --Charlesreid1 (talk) 00:13, 5 November 2010 (UTC)

Separate articles about the turbulence models
Perhaps the sections about turbulence models (DNS, RANS, LES) should be integrated more with their respective separate articles, to avoid having the same information in more than one place? -- Ehdr 15:33, 16 March 2007 (UTC)


 * The general approach should be to give a brief description of each turbulence model, as it pertains to computational fluid dynamics, and use the Main template to point readers toward the full article if they're interested. --Charlesreid1 (talk) 00:16, 5 November 2010 (UTC)

Cleanup templates
I've gone through and added multiple cleanup templates, particularly Refimprove, Unreferenced section, Weasel, Who/Whom?, Citation needed. The style of writing in the article is terrible, it sounds more like an editorial than an encyclopedic treatment of CFD. The sections could be greatly improved by simply adding some additional references and getting rid of weasel words and editorial phrases, but more work is sorely needed. It's frustrating to see such an important topic get such a poor treatment. --Charlesreid1 (talk) 18:04, 5 November 2010 (UTC)


 * Quality of article and references has seen a marked improvement. Charlesreid1 (talk) 10:13, 31 March 2017 (UTC)

Lowering Article Quality Rating
I've lowered the article quality from C to Start due to the lack of citations and overall plethora of unverified claims. I'm also including the Wikipedia editorial team's assessment table/criteria below. I believe this article very clearly fits in the Start class, as it lacks citations, has had a Refimprove template since 2008, and leaves a majority of readers looking for a different source of information about CFD.

Accordingly, the number one task for improving this article should be to include additional references for unverified claims.

--Charlesreid1 (talk) 18:13, 5 November 2010 (UTC)


 * Revisiting the article rating, as the quality of this article has substantially improved over the years. The rating now seems to fit best in the B category. In keeping with WP:BOLD, changing article rating to B. Charlesreid1 (talk) 10:01, 31 March 2017 (UTC)

Huh?
This article states: "With high-speed supercomputers, better solutions can be achieved." This would imply that merely switching to a faster computer is going to help, which is of course not true. Higher mesh resolution will generally help get a "better" solution as will improving physical models - both of these require more computational resources, so if you want to get your answer in the same time, you'll need a faster computer, but a faster computer will not in itself do much for you in terms of accuracy, assuming that's what "better" is supposed to mean here. — Preceding unsigned comment added by 192.158.61.141 (talk) 14:58, 25 May 2011 (UTC)

Combustion models for CFD
Can someone review this newly created article? Not sure if it should be a stand alone. Hell In A Bucket (talk) 13:56, 4 December 2012 (UTC)

CFD in Aerospace Accident Investigations
Does someone know if CFD is regulary used in Aerospace accident investigations. I read about CFD investigations related to space missions, but is it typically used for investigations within the aerspace domain? — Preceding unsigned comment added by 195.124.114.42 (talk) 15:24, 12 August 2013 (UTC)

Merge with Fluid simulation
I see no clear distinction between this article and the article Fluid simulation, so I propose that we merge them together. What do you say? —Kri (talk) 19:10, 18 September 2014 (UTC)


 * Oppose I think they are about two different topics and have two different goals although solve similar problems. XFEM Skier (talk) 15:40, 25 September 2014 (UTC)


 * Oppose These are different topics. CFD is about numerically solving the equations of fluid dynamics as well as possible. Fluid simulation in computer graphics is about simulating the appearance of fluid elements in a graphics scene or animation. If a fluid simulation looks good, it doesn't matter if the physics is correct. An example of this is Fourier synthesis of ocean waves. This technique can produce a good looking ocean, but isn't numerically solving the underlying equations of fluid dynamics. --Mark viking (talk) 17:55, 25 September 2014 (UTC)


 * Well, I would say that the Fourier synthesis is a form of CFD and that it does solve the underlying wave equations approximately after making some assumptions about the flow, since it is based on theory, which is really what all other CFD methods do as well. :) Although it is not a very powerful method and can only be applied to a very limited set of fluid dynamics problems, like those that are interesting in computer games and computer graphics. —Kri (talk) 20:51, 25 September 2014 (UTC)


 * Respectfully, I disagree. As the Mastin, et. al., 1987 paper on Fourier synthesis of ocean waves describes, this particular fluid simulation is based on Fourier synthesis using a weighting based upon a Pierson–Moskowitz spectrum. The spectrum itself is an empirical, statistical one derived from ship wave data. While there is simulation of the appearance an ocean surface, there is no underlying numerical simulation of any equations of fluid dynamics. Mastin, et. al., were faking it and doing a good job of it--it was a big advance in computer graphics. But it wasn't CFD. --Mark viking (talk) 23:56, 25 September 2014 (UTC)


 * The Fourier synthesis method uses a differential equation to update the phase angle in the Fourier transform of the free surface elevation. This equation can be derived from the boundary element method applied to incompressible, irrotational ocean water, by linearizing the boundary integral equation and transforming it to the frequency domain. This results in that different eigenmodes map against different wavevectors. If this is not CFD, where along the transformation from BEM does it stop being CFD? When does the differential equation stop being an equation of fluid dynamics? —Kri (talk) 10:53, 27 September 2014 (UTC)


 * About the usage of a spectrum, that just affects the initialization of the system, so I don't see how that would affect the method itself. —Kri (talk) 11:10, 27 September 2014 (UTC)


 * For: The only difference that might exist between the terms "CFD" and "fluid simulation" is in the way they are normally used, and would in that case be (as XFEM Skier pointed out) their goals. Although essentially, they are two different terms for the same concept—they both simulate fluids by solving fluid dynamics equations numerically and can both utilize the same methods (even though the usability of the different methods may vary depending on the goal). Sure, CFD is a branch of fluid mechanics, but fluid simulation may also be seen as such. The two terms also seems to be used interchangeably by Jerry Tessendorf in a TED talk I recently bumped into. —Kri (talk) 17:49, 19 November 2014 (UTC)


 * Oppose The two subjects have fundamentally different objectives. — Preceding unsigned comment added by 77.22.147.241 (talk) 22:20, 6 December 2014 (UTC)


 * Oppose Arguably fluid simulation (in the sense used here) is a subtopic of CFD, but even taking that to be correct, if they were merged into one article then I would suggest splitting the computer graphics part of the merged article off into an article of its own. The amount of content in the current fluid simulation article is over the top for its significance in CFD, it's sufficiently notable for an article of its own, so it should continue to have one. Djr32 (talk) 19:37, 26 December 2014 (UTC)


 * Oppose Fluid simulation and CFD are essentially synonyms. The current 'fluid simulation' article should be re-titled to something more appropriate and descriptive, e.g. 'fluid animation' or 'fluid simulation in computer graphics' or something along those lines. Christopherbatty (talk) 01:42, 23 February 2016 (UTC)


 * Oppose Fluid simulation and CFD are basically the same thing. However, I agree that the current fluid simulation article has the wrong name and should be called fluid animation (or something similar) instead. I'll probably do the rename in a few days unless someone disagrees. ArguMentor (talk) 11:46, 27 February 2016 (UTC)


 * You and Christopherbatty make a good point. I'd support a better fitting rename. --Mark viking (talk) 21:12, 27 February 2016 (UTC)

Parallel computing
This is missing from the solution methodology. I think it is an important and interesting item and is also one in the to-do list topics to include of this article. I propose a section with a few bullet points regarding
 * The need for parallel computing
 * Methodology
 * Shared vs. distributed parallel computing
 * Partitioning (principles and methods)
 * Various protocols (MPI, PVM, etc)
 * Best practices
 * Nodes/CPU core
 * Overlapping
 * Parallel performance definition
 * Massive parallel (thousands of CPUs)

I will soon drop a draft. Sankgeo 10:47, 14 March 2016 (UTC) — Preceding unsigned comment added by Sankgeo (talk • contribs)

Article issues and classification
Article fails the B-class criteria with several November 2010 "citation needed" tags and several unsourced (as yet untagged) paragraphs and subsections. Reassess article to C-class. -- Otr500 (talk) 17:54, 27 February 2023 (UTC)