Traveling forge













A traveling forge, when combined with a limber, comprised wagons specifically designed and constructed as blacksmith shops on wheels to carry the essential equipment necessary for blacksmiths, artisans (called artificers in many armies) and farriers to both shoe horses and repair wagons and artillery equipment for both U.S. and Confederate armies during the American Civil War, as well as by western European armies. The traveling forge was frequently also referred to in The Official Records simply as a forge, and sometimes referred to by Civil War buffs as a battery forge.

Overview
An American Civil War-era traveling forge contained 1200 lb of tools, coal and supplies. These tools and supplies included a bellows attached to a fireplace, a 4 in vise, 100 lb anvil, a box containing 250 lb of coal, 200 lb of horse shoes, 4 ft bundled bars of iron, and on the limber was a box containing the smith's hand tools. A battery wagon accompanied each traveling forge carrying additional blacksmith, wheelwright, and carriage repair supplies.

American Civil War-era traveling forge wagons evolved from crude blacksmith carts used during the American Revolutionary War as well as from equipment used in Europe during the 1840s. British traveling forges were documented in An Aide-Memoire to the Military Sciences volume 1 by Royal Engineers, British Service, 1845, Col. G.G. Lewis, senior editor.

British traveling forges likely had canvas covers as indicated by the number and spacing of wood arches above the bellows, and what appears to be cord anchor points on the sides of the bellows house. A canvas cover would have been logical as protection of the bellows from the weather, and in accordance with the standard practice of covering wagons at that time. This canvas cover evolved into the wooden cover of the U.S. version of the traveling forge.

The U.S. mid-19th century traveling forge was standardized for U.S. manufacturers in the drawings created by Captain Albert Mordecai circa 1850 under commission by the federal government. Copies of Captain Mordecai's drawings are currently published by Antique Ordnance Publishers. The book Field Artillery Traveling Forge book No. 61 published by Antique Ordnance Publishers contains most of the measured drawings and other information necessary to reproduce the traveling forge. Additional crucial information covering measurements, construction and materials used with the traveling forge may be found in the Ordnance Manual of 1863.

The Ordnance Manual of 1863 says that in use, the traveling forge was hooked to the back of a limber that was identical in construction to the limbers used to pull field cannon, except for the internal arrangement of the limber chest. The Ordnance Manual of 1863 details information about the wheels, paint, wood and iron parts used on the traveling forge, as well as the tools stored in the traveling forge's limber chest and in the battery wagon for use by the blacksmiths and artisans.

During the Civil War, a traveling forge was provided for each cannon battery, and other traveling forges accompanied each army to provide service to equipment and horses. Portable sheet metal Mountain Forges were provided to units with mountain howitzers which were primarily deployed in mountainous areas inaccessible to the No. 1 cannon carriage and wagons.

The Official Records only document official government built traveling forges constructed according to specifications in the Ordnance Manuals and the Mordecai drawings. No evidence exists that either army ever used traveling forges that were not built by government contractors.