User:Skysmith/Missing topics about Engineering 2

Engineering Two

Control systems

 * Abort branch -
 * Access control point, access control points -
 * Active accommodation -
 * Actuating system -
 * Adaptive branch -
 * All-translational system -
 * Approach vector -
 * Asynchronous control -
 * Attraction gripper -
 * Autoadaptivity -
 * Automatic check-out system -
 * Automatic control balance -
 * Automatic control block diagram -
 * Automatic controller -
 * Automatic level control -
 * Automatic regulator automatic controller -
 * Automatic-control error coefficient -
 * Automatic-control frequency response -
 * Automatic-control stability -
 * Automatic-control transient analysis -
 * Autostability -
 * Back solution -
 * Bang-bang-off control -
 * Bang-zero-bang control -
 * Biocontrol system -
 * Blind controller system -
 * Block signal system -
 * Blow-lifting gripper -
 * Body rotation -
 * Boom arm -
 * Branch gain branch transmittance -
 * Break frequency -
 * Breakaway wrist -
 * Buried set-point method -
 * Cascade compensation -
 * Cascade control -
 * Cautious control -
 * Central control -
 * Centroid of asymptotes -
 * Certainty equivalence control -
 * Circulation control -
 * Clamping gripper -
 * Clock control system -
 * Comfort control -
 * Compensating network -
 * Compensation signal -
 * Computational numerical control -
 * Computed path control -
 * Computer control -
 * Computer-controlled system -
 * Contactor control system -
 * Continuous control -
 * Continuous system -
 * Continuous-time signal system -
 * Control accuracy -
 * Control agent -
 * Control board -
 * Control ceiling -
 * Control desk -
 * Control element -
 * Control spillover -
 * Control-system feedback -
 * Controller-structure interaction -
 * Controlling magnet -
 * Coordinated-axis control -
 * Course programmer -
 * Cutter compensation -
 * Daylight controls -
 * Dead-time compensation -
 * Deadbeat algorithm -
 * Deadbeat response -
 * Delay time -
 * Derivative network -
 * Differential gap controller -
 * Direct command guidance -
 * Direct control function regulatory control function -
 * Direct-feedback system -
 * Directional control -
 * Distance/velocity lag -
 * Distributed numerical control -
 * Driving-point function -
 * Dual-mode control -
 * Electronic control transmission -
 * Electronic Performance Monitoring -
 * Electronic Protection Measure Electronic Protection Measures (EPM)- /
 * End-of-arm speed -
 * End-point rigidity -
 * Error coefficient Error constant -
 * Expert control system -
 * Feedback branch -
 * Feedback compensation -
 * Feedback control signal -
 * Feedback regulator -
 * Feedback transfer function -
 * Feeding zone -
 * Finger gripper -
 * First-level controller -
 * Fixed-active tooling -
 * Fixed-passive tooling -
 * Float control -
 * Following error -
 * Force-controlled motion commands Force-controlled motion command -
 * Forward path -
 * Forward transfer theorem -
 * Frequency locus -
 * Frequency-response trajectory -
 * Gain asymptotes gain asymptote -
 * Gain-crossover frequency -
 * Goal coordination method -
 * Graphic panel -
 * Grip vector -
 * Gripping zone -
 * Guidance Control System (GCS) guidance control -
 * Hot editing -
 * Hunting (control systems) -
 * Image table -
 * Implicit programming -
 * Impulse modulation -
 * Individual distributed numerical control -
 * Inductosyn -
 * Infinite-capacity loading -
 * Integral action -
 * Integral compensation -
 * Integral control -
 * Integral network -
 * Integral square error -
 * Interaction balance method goal coordination method -
 * Interaction prediction method -
 * IR control -
 * Jump phenomenon -
 * Jump resonance -
 * Lagging network Lag network integral network -
 * Large-systems control theory -
 * Lead compensation -
 * Lead network, derivative network -
 * Learning control -
 * Linear control system -
 * Linear feedback control -
 * Linear regulator problem -
 * Linear system analysis -
 * Linear-quadratic-gaussian problem -
 * Liquid level control -
 * Load compensation -
 * Local networking -
 * Long-term repeatability -
 * Loop control photoelectric loop control -
 * Loop transfer function Loop ratio -
 * Loop transmittance -
 * M contour -
 * Main Control Cabinet, industrial automation -
 * Manual control unit -
 * Manual control -
 * Master/slave manipulator -
 * Mechanical control -
 * Mini-maxi regret -
 * Minor loop -
 * Mirror-image programming -
 * Model reduction -
 * Model reference system -
 * Model-following problem -
 * Modern control -
 * Moisture control -
 * Multiphase control theory -
 * Multiple-loop system -
 * Neutral stability -
 * Nichol's chart -
 * Non-minimum-phase system -
 * Nonfeasible method goal coordination method -
 * Nonhoming -
 * Noninteracting control -
 * Nonlinear feedback control system -
 * Observation spillover -
 * Observer (control systems) -
 * On-off system -
 * Open-loop control system -
 * Operations sequence -
 * Optical feedback control -
 * Optimizing control function -
 * Overriding process control -
 * Overrunning process control -
 * Parallel compensation, feedback compensation -
 * Parallel gripper -
 * Part programming -
 * Passive accommodation -
 * Phase crossover -
 * Phase plane analysis -
 * Photoelectric register control Photoelectric scanner -
 * Photoelectric smoke-density control -
 * Photoelectric sorter -
 * Piecewise linear system -
 * Piercing gripper -
 * Pilot wire regulator -
 * Pneumatic control -
 * Point of control -
 * Point-to-point programming -
 * Pole-zero configuration -
 * Popov’s stability criterion -
 * Position control -
 * Position-contouring system -
 * Positional-error constant -
 * Positioning action -
 * Potentiometric controller -
 * Power cylinder -
 * Pretravel -
 * Primitive control system -
 * Process control engineering -
 * Program scan -
 * Programmable electronic system -
 * Programming panel -
 * Programming unit manual control unit -
 * Proportional band -
 * Proportional-plus-derivative control -
 * Proportional-plus-integral control -
 * Proportional-plus-integral-plus-derivative -
 * Proportional-speed control floating control -
 * Pulsed transfer function -
 * Quadratic performance index -
 * Quasi-linear feedback control system -
 * Rate control -
 * Ratio control system -
 * Reduced-order controller -
 * Regional control station -
 * Register control -
 * Regulating system -
 * Relay control system -
 * Remote-access admittance -
 * Repeat accuracy -
 * Reset action -
 * Residual mode -
 * Resolve motion-rate control -
 * Retroaction -
 * Return difference -
 * Second-level controller -
 * Self-organizing function -
 * Self-tuning regulator (STR) -
 * Sensitivity function -
 * Sensory control -
 * Sepatrix -
 * Servolink -
 * Setup person -
 * Short-term repeatability -
 * Singing margin -
 * Single-loop feedback -
 * Singular arc -
 * Slave (control systems) -
 * Soft-wired numerical control -
 * Stability exchange principle -
 * Stabilized feedback -
 * Standstill feature -
 * State feedback -
 * Switching surface switching mechanism -
 * System bandwidth -
 * System response -
 * Tandem compensation, cascade compensation -
 * Tandem distributed numerical control -
 * Teach mode -
 * Teach-by-doing -
 * Teach-by-driving -
 * Teaching interface -
 * Telechir -
 * Telechirics Telechiry -
 * Telephone controller -
 * Telesupervision -
 * Temporal decomposition -
 * Time system -
 * Time-controlled system clock control system -
 * Time-varying system -
 * Too-function controller -
 * Tool-center point -
 * Tracking problem -
 * Traffic cop (control systems) -
 * Transportation lag, distance/velocity lag, transport lag -
 * TV guided -
 * Two-port system -
 * Universal gripper -
 * Vacuum gripper -
 * Velocity control, rate control -
 * Velocity error -
 * Well-regulated system -
 * Work station independence -
 * World modeling -
 * Yaw simulator -
 * Z-transfer function pulsed transfer function -

Analysis methods

 * Acceleration analysis -
 * Acceleration measurement -
 * Angle method of adjustment -
 * Beam servoed rotational method -
 * Burning velocity measurement -
 * Circuit testing -
 * Converter process -
 * Density test, floating test to compare pieces of glass -
 * Double weighing Gauss method of weighing -
 * Gauss method of weighting, Gaussian weighting method, double weighting -
 * Instrument analysis -
 * Isokinetic sampling -
 * Logic & Accuracy Testing -
 * Luminescence analysis -
 * Manometric hypsometry -
 * Mechanical analysis -
 * Pipeline processing -
 * Pressurization testing -
 * Processing technique -
 * Redundancy calibration -
 * Supercharge method -
 * Surface modelling -

Repairs

 * Breakdown service -
 * Calibration interval -
 * Change main device -
 * Degradation failure -
 * Diagnose faults -
 * Failure testing -
 * Magnetic crack detection -
 * Maintenance outage -
 * Major repair -
 * Programmed depot maintenance -
 * Redundance calibration Redundancy calibration -
 * Remedial maintenance -
 * Repair depot -
 * Repair forecast -
 * Repair parts list -
 * Repair receipt -
 * Retrieval service -
 * Running spare -
 * Self calibration, self-calibration -
 * Sonic flaw detection -
 * Steadiness tester -
 * Thermal calibration -
 * Thermal recalibration -
 * Tire test -
 * Unscheduled maintenance -

Damage and related

 * Carbon knock -
 * Compression failure -
 * Fire crack –

History

 * Etruscan engineering -

Related organizations

 * American Society of Non-destructive Testing (AINT) -
 * American Society of Nondestructive Testing (AINT) -
 * American Society of Sanitary Engineering –
 * Council for Engineering Institutes (CEI) -
 * Engineering Association of Iran -
 * Engineering Equipment and Materials Usage Association -
 * Engineering Equipment and Materials Usage Association -
 * Engineering Research and Development Center -
 * Engineering Society of Canada -
 * European Drilling Engineering Association -
 * European Federation of Corrosion -
 * Expendable Tubular Technology Forum -
 * Institute for Electrical and Electronic Engineering -
 * Institute of Radio Engineering -
 * Institution of Lighting Engineers -
 * International Association of Drilling Contractors (IADC) -
 * Nigerian Technical Aid Corps -
 * Oceanic Engineering Society -
 * Production Engineering Association -
 * Slocum Mechanical Puzzle Collection -

Large-scale projects

 * Adjalara Project, Benin -
 * Century Storage Scheme -
 * Harpu Hydroelectric Project -
 * Kunene River Hydroelectric Project -
 * Mandoul Valley Development Plan -
 * Mono River Project -
 * Operation Mandoul, Mahdoul Valley Development -
 * Rapti Valley Development Project, Nepal -
 * Three Gorges Water Conservancy Project -
 * Tumen River Area Development Program, North Korea -

Education

 * Australian Institute of Steel Construction (AISC) -
 * Moscow Institute for Construction and Engineering -

Laws

 * Dangerous Substance and Explosive Atmosphere Regulations (DSEAR) -

Engineers and the like

 * Alexander Nadiraza, Soviet rocket engineer -
 * Arthur Paul Pendrick, British inventor -
 * Binkie Braithwaite, Inventor -
 * Estelle Eke, Sierra Leone aeronautical engineer -
 * Gottfried Heinrich Ludwig Hagen (1799-1884) German engineer -
 * Hans Dineson, Swedish engineer -
 * Henri Emile Bazin (1829-1917) French hydraulic engineer -
 * Henry Fleeming Jenkin (1833-1885) Welsh engineer -
 * John Alvey, British telecommunications engineer-
 * Louis Boirault, French engineer -
 * Mike Elstob, British physicist, engineer and cybernetist -
 * Rusi Talayarkhan, US nuclear engineer -
 * William Braden (engineer), US engineer -
 * Wolfgang Pilz, German missile engineer –

Miscellaneous

 * Ackerman angle -
 * Advanced Technology Product -
 * Aerostat process –
 * Allied Technical Publications (ATP) -
 * Apex Delivery and Lifting System or Murphy Mover - /
 * Aquifer water drive -
 * Asphalt soil stabilization -
 * Axial Force Only Axial force only (AFO) -
 * Baffle (landscape design) -
 * Blowout prevention) -
 * Broadband vibration –
 * Burning surface -
 * Cater coefficient -
 * central line radius -
 * Clusec -
 * Coaxial injector -
 * Command destruct -
 * Copper plumbing -
 * Culvert pipe -
 * Design of menus -
 * Development wall -
 * Digital human model -
 * Discharge head -
 * Economic tool life –
 * Element Date Sheet (EDS) -
 * Engineering firm -
 * equipment failure analysis -
 * equipment failure -
 * equipment reuse -
 * Flexible engine shaft -
 * foam pig -
 * Foot of head -
 * Gas-lift-loop reactor –
 * Gimbaled motor -
 * Gold Plating (jargon), jargon about increasing prize for superficial improvements -
 * gravity loading -
 * gross motion planning -
 * Hudson coupling -
 * Intelligent Resource-bounded Machine Architecture -
 * Kennedy key -
 * Leroy lettering system -
 * neutral burning -
 * Nominal pass-band center frequency -
 * Object Engineering Process Object engineering process -
 * Pil canning -
 * Plydome -
 * Praa Institute Engine Room -
 * problem reduction -
 * Psychophysical risk assessment -
 * Purnagiri Dam Controversy, Purnagiri Dam 2000 -
 * Requirements Definition Document -
 * Smart technology -
 * Sociotechnical system analysis –
 * Stratford ramp -
 * Surcharge (civil engineering) -
 * Technical bulletin -
 * TEMA standard -
 * Tensile viscosity -
 * Third pipe system -
 * Trinkle coupling -
 * UV resistance factor –