Woodchipping in Australia



Woodchipping is the act and industry of chipping wood for pulp. Timber is converted to woodchips and sold, primarily, for paper manufacture. In Australia, woodchips are produced by clearcutting or thinning of native forests or plantations. In other parts of the world, forestry practices such as short rotation coppice are the usual methods adopted.

Uses of wood chips includes the manufacture of particle board (or "chip board") and other engineered woods, mulch and fuel.

Sources and process
Historically, the primary sources of wood chips in Australia have been the extensive Eucalyptus hardwood forests found throughout temperate areas of the country. In more recent times, a significant proportion comes from managed hardwood and softwood plantations.

During the late 1960s and 1970s, the high demand for paper and the relatively low cost and availability of the native forests made the establishment of a woodchipping industry a viable proposition. Conversely, the establishment of a woodchipping industry made it economically feasible to clearfell areas of mixed or substandard forest that could not otherwise have been felled. Clearfelling is a controversial forest practice in Australia, and opponents argue that the woodchipping industry is culpable for its continuation.

Woodchips are converted into a fibre that can be made into various grades of paper or rayon for the textile industry. Most processing and value adding takes place outside of Australia. The Australian economy benefits directly from a low-cost and high-volume export commodity.

Usage
Wood chips, as a byproduct of the timber industry, have been used in many ways for centuries, for example as a material for the production of wallpaper or as a disposable floor covering in butchers shop or drinking houses. Wood pulp is the primary market for the woodchipping industry in Australia.

The practice, known as woodchipping, was to make use of most of the woody material in a tree to produce wood chips. This was then converted into paper, hardwood pulp is mainly used for printing paper and softwood pulp is added for good quality. An energy-intensive process, it also involved the use of bleaches and other toxic chemicals. This stage of the process, known as Kraft pulping, was primarily performed in Japan and elsewhere. High demand for paper products had purpose-built bulk carriers increase the export of woodchips from Australia to Japan.

The separation of the chipping stage and the pulping and paper mills required the supply of energy usually sourced from byproducts of the process. Additional energy expenditure is found in the shipping of raw materials and export of the finished product.

Criticism and environmental opposition
The introduction of the wood chip industry to Western Australia in the 1960s initially attracted less opposition than it did in the eastern states. At first it was seen as an opportunity for the economic development of the south west; it was not until the 1970s that an environmental movement against it began to emerge. The volatility of the issue became apparent in 1976 when two activists carried out the Bunbury woodchip bombing, a failed attempt to disable woodchip exporting facilities for 18 months. Following decades of campaigning by environmental groups and others commercial forestry within native forests, including for woodchipping, was ended in Western Australia and eastern Victoria in 2024.

Woodchip mill companies and locations

 * Eden, New South Wales
 * North Shore, Victoria
 * Longreach, Tasmania
 * Bell Bay, Tasmania
 * Hampshire, Tasmania
 * Gunns
 * W.A. Chip & Pulp Co
 * Wesley Vale pulp mill

Woodchip critics and opponents

 * Australian Greens
 * Australian Conservation Foundation
 * Campaign to Save Native Forests
 * Conservation Council of Western Australia
 * Great Walk Networking
 * Liberals for Forests
 * South West Forests Defence Foundation
 * Western Australian Forests Alliance