Module talk:Location map/Archive 5

Label positions
Is there any way that the 4 positions for the label can be tweaked? I've noticed a problem on a number of UK articles, for instance Lambroughton; if the default right positioning is used the label goes outside the map, and this also occurs with top and bottom positioning. If left positioning is used, the last letter of the place name overlaps the locator pushpin.

Is there anyway to force the label to be further left, or to allow a manual positioning of the label for those cases where default positions fail?--Nilfanion (talk) 10:48, 17 September 2010 (UTC)


 * I brought this up in the thread above. I had thought about adding a "farleft" option or something, or a nudge factor or something.  It would be fairly easy to add an additional keyword that would result in pushing twice as far to the left, if there was some consensus for what to call it (e.g., left2, farleft, wideleft, leftx2, ...).  Or, we could make it so if the label position is a number, then this is the value used for the offset.  Or, we could add yet another parameter which would allow for either adding to, or overriding the default value for the label offset.  Comments? Plastikspork ―Œ (talk)  22:44, 25 September 2010 (UTC)

Extra two pixels
I've noticed that the first div block adds two pixels to the width of the output. Both pixels end up on the right side. Kind of like a right hand margin for an image that floats right. Does anyone know why this is done. Also, could we have a parameter that would prevent the extra pixels from being being added. It would be useful in Infoboxes. –droll &#91;chat&#93; 00:15, 13 October 2010 (UTC)
 * P.S. I've noticed this, especially, when using no caption and no boarder. See the Map with no caption or border example. –droll &#91;chat&#93; 00:40, 13 October 2010 (UTC)
 * Isn't it something to do with Internet Explorer not following the W3C standards for borders, padding etc., so that we need to compensate? -- Red rose64 (talk) 17:46, 13 October 2010 (UTC)


 * Thanks for the reply. I don't know that its needed for IE. [[Image|... ]] doesn't generate anything like this. I haven't checked to see if it has something to do with the way captions are handled though. It just seems a bit daft. I'll think about it. –droll &#91;chat&#93; 20:28, 13 October 2010 (UTC)
 * P.S. I'm only concerned about the case with no caption and no boarder. The extra pixels might well be required when a border is used. –droll <b style="color:#704214">&#91;chat&#93;</b> 20:39, 13 October 2010 (UTC)
 * I worked on a version in the sandbox and reached the conclusion that the 2px only needed if there is a boarder. I checked the testcases in Foxfire, Chrome, Opera, Safari, IE 7 and IE 8 on windows, and Firefox and Epiphany on Linux. I want to think about the code in the sandbox for a bit unless Plastikspork thinks its good to go. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 22:23, 13 October 2010 (UTC)

OK! The reason the 2px are added is because the inner block adds a 1px border around the image in addition to the outer border. So the code in the sandbox is good and the change should be transparent. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:35, 13 October 2010 (UTC)
 * Okay, I updated the template. Let me know if there is a problem. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  00:23, 14 October 2010 (UTC)

Bug with default label position
I have noticed this a few days ago and this seems to be a bug which didn't occur before. Despite the default label position should be right, all dots that have longitude more than (approx) 30 degrees have caption on the left (see three most right dots on the example). I made an example with location map start template and multiple dots just to illustrate, but this is reproducable with single dot location map template too. -NineInchRuiner (talk) 10:05, 27 October 2010 (UTC)


 * In the default case the template is designed to move the label to the left if the marker is near the right side of the page. This is to avoid labels that run past the right side of the map. The position can be forced by setting position=right . I haven't looked at Location map start but the default behavior is probably the same as this template. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:05, 27 October 2010 (UTC)
 * I looked at Location map marker and it has the same markup for the default label position as this template. This the way it should be, I think. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:19, 27 October 2010 (UTC)
 * As I mentioned, this wasn't this way until a few days ago (ok, may be a little more) so it has to be some recent change. If it works like you said, than the criteria isn't clearly understood to me. It isn't starting at the middle at the map but rather smth like 1/4 from the right side, and it is not taking the caption length in the account. Clearly none of the labels on the example would run past the border. I believe that wikipeadians in general are smart enough to change caption position manually if needed. -NineInchRuiner (talk) 18:51, 27 October 2010 (UTC)


 * I did some more checking and Location map marker was modified on October 13 and October 14. The behavior of that template was synchronized with this one. I totally support the changes because the default cases are handled without errors. As I mentioned the label position can be forced by setting position=right . I took the liberty of modifying your example to demonstrate this alternative. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 00:27, 28 October 2010 (UTC)


 * It seems like NineInchRuiner is reporting a bug, and it hasn't been resolved. Is it fixable? —hike395 (talk) 04:56, 3 November 2010 (UTC)
 * So, anyone care about this at all? NineInchRuiner (talk) 12:02, 12 January 2011 (UTC)
 * How's that? Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk) 23:37, 12 January 2011 (UTC)

Graph edges / Routes to be overlaid on maps
Hi, I'm quite excited to have used the various template:location map to place markers on maps. The next step for me would be to be able to connect these vertices / graph edges into routes, so that travelers routes, or lines can be overlaid onto these maps.

OK, I've worked up a nice and simple solution to this problem of route or path overlays. I've sandboxed it and I'm very happy with a first cut testing. I'll move on to cross-browser testing tomorrow. Can somebody with a LOT more experience with templates than me, give me some guidance on the following questions: Sladew (talk) 10:56, 4 November 2010 (UTC)
 * Should I cut a new template for my changes or roll them into Location map+ (I really don't want to fork unnecessarily, but I don't want to mess up anybody elses use of that template...)
 * Is there any sort of process for "approving" this template for use, or do I just throw it up and start dropping it on pages??
 * That sounds phantastic! Can you give an example, e.g. in your user space? If it's good there will be a lot of articles where we can use it and I'll start an PR campaign in ruwiki and dewiki for that project. --Obersachse (talk) 17:54, 25 November 2010 (UTC)

Add a classname to DIV-container
Hi, I want to suggest to add a specific classname to the maps div container (something like "locmap", "locationmap", ...). This would make the HTML more semantic and allows to hide the maps by user css. --Arch2all (talk) 09:37, 5 November 2010 (UTC)

Caspian Sea
Could anyone create a template location map for Caspian Sea? It is needed for the oil field infoboxes for the Caspian Sea oil fields articles. Thank you in advance. Beagel (talk) 19:58, 23 November 2010 (UTC)
 * Would this be useful for you? --Obersachse (talk) 17:46, 25 November 2010 (UTC)

Template:Location map Caspian Sea is now ready for use... Uwe Dedering (talk) 15:34, 26 November 2010 (UTC)
 * Thank you, Uwe. This is very useful. Shah Deniz gas field and Kashagan Field are examples of usage of this location map. Beagel (talk) 00:25, 27 November 2010 (UTC)

Inset Maps
At the FAC for Thistle, Utah, the request has been made to have the location map support an inset. The idea being that many people may not recognize a simple map of Utah, and it may be helpful to have an inset map that shows the USA with Utah highlighted. I asked around at a few venues, most people agree this should be an option, as this is likely to occur with several jurisdictions in the world, not just Utah. After digging in the template coding, it appears the easiest way to support inset maps would be by modifying this template. There is some precedent, Template:Infobox Indian jurisdiction does this. Anybody have objections, thoughts, etc? Dave (talk) 17:34, 5 January 2011 (UTC)
 * I think the way to go about this is to add an inset map parameter to the pages (e.g., Location map USA Utah), then modify this template to use that parameter if it exists.  I will try to code it up if I can find some time today, and if someone else doesn't do it first.  Thanks for the great suggestion. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  02:04, 6 January 2011 (UTC)
 * I was debating between doing as you suggest (at the district level template), or having it at the Location map level (i.e. this template), with parameters for the inset map file and a location (upperleft, lowerright, etc.). I was planning to work on this. However, I've never attempted anything this complicated. As such, if you do want to take this on, I would more than welcome the help, but would appreciate to be kept in the loop for the learning. Dave (talk) 02:52, 6 January 2011 (UTC)
 * Okay, here is how I would see it working for say Utah. This template is called as   This template then calls Location map USA Utah to get the name of the map image, the coordinates of the edges of the map, etc.  This template then displays the image, overlays that image with an image of a pin in the correct location, overlays the image with the label text, adds the caption at the bottom, etc.  Basically, adding an inset map is not fundamentally different than adding a pin.  Hence, my proposal is to have this template then ask  for the name of the inset image, if there is one.  If so, it will then overlay that image on the map.  It will also probably need to know the dimensions of that inset image.  We could allow for  to suggest a default location for the inset, but have the default be the upper left.  We could have the inset automatically move to another corner if the pin is too close to the upper left.  We will also want the user to be able to pass a parameter to this template to override the location of the inset as well.  Can you see any problems here? Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  03:23, 6 January 2011 (UTC)
 * In the case of Utah, it's pretty obvious that the inset map should go in the upper-right corner. However, for other jurisdictions it may be less so. How the Indian jurisdiction template does it is with a switch statement, based on the entry for the jurisdiction parameter, that selects the image file to be inset and the float coordinates. Dave (talk) 03:33, 6 January 2011 (UTC)
 * Do we have a good inset map for Utah? Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk) 04:01, 6 January 2011 (UTC)
 * I was experimenting with File:Map of USA UT.svg, the naming convention is consistent for the 50 states, substitute UT for your favorite 2 digit state code.Dave (talk) 04:13, 6 January 2011 (UTC)
 * I have begun some sandbox testing. The test code for Location map is at User:Moabdave/sandbox, with the test code for Location map USA Utah at User:Moabdave/sandbox Utah and a test usage case at User:Moabdave/sandbox2. It's not ready for primetime yet, the inset map does not appear at the appropriate place.
 * Good start. I have to log off right now, but I can work on it tomorrow.  Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  07:01, 6 January 2011 (UTC)


 * Okay, I have something that appears to work coded in the sandbox. It still needs some work, but the basic idea is there.  The positioning is fairly straightforward, since you can use "top: 0px; left: 0px;" for upper left, "top: 0px; right: 0px;" for top right, ...  However, the div also needs to know the width for top positioning, and the height for bottom positioning.  The trick is that the location map can be resized as well.  There might be a clever way to do this without knowing the dimensions of the inset image, and doing some calculations, but I haven't found one yet.  Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  03:22, 7 January 2011 (UTC)
 * Thanks for throwing that together. I'm still playing with my sandbox version also. In my sandbox, I'm trying to figure out the height of the base map by the fact that the map width is known (it's either specified or defaults to 240px) and then figuring out the image ratio from the co-ordinates of latitude and longitude for the extremes of the map (stored in Template:Location map ). However, I've never messed with positioning of images before, so I'm still on the uphill side of the learning curve and having limited success with it. Tripping over rakes is how I learn the fastest, so I have no doubt I'll figure it out. Just need a few more profanity laced rants and more caffeine. =-) Dave (talk) 04:59, 7 January 2011 (UTC)
 * Okay, I got some help from RexxS who helped figured it out. The "top: 0px; right: 0px;" works if you simply omit the dimensions.  See the comments on Jack Merridew's page.  I am currently using NW for upper left, NE for upper right, SE for lower right, ..., but I am open to other suggestions. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  05:33, 7 January 2011 (UTC)

Here are some positioning tests and width tests

Currently, I have the inset_map_width parameter as the percentage of the overall width. I suppose a better name would be "inset_map_width_percent" or something. But, it looks like the positioning works. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk) 05:43, 7 January 2011 (UTC)
 * I just changed it to "inset_width_percent" and "inset_position", but feel free to suggest something else if you have a better idea. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk) 06:02, 7 January 2011 (UTC)
 * Looks like we got both ideas working, my latest attempt is atUser:Moabdave/sandbox2. However, I think yours is more elegant. Thank you very much for doing this. I say go for it. Dave (talk) 07:10, 7 January 2011 (UTC)
 * I'm going to take the liberty of adding some comments to the sandbox code. This is if we decide to implement this change, it will be a little more readable. That was about half the problem that was preventing me from getting my attempt working, an improper reverse-engineering of the existing code that could have been avoided with better code comments. Dave (talk) 19:00, 7 January 2011 (UTC)
 * Great. I simplified it a bit more by creating a subtemplate which just does the pin/label placement.  This cut down on some redundancy in the code, where the positioning was being computed more than one.  I will admit it's still not the easiest to read.  It took me awhile when I first started working on it.  I may move some more stuff to subtemplates to try to make it a bit more readable, and add some more comments.  I will see if I can get some more feedback as well, and try to implement the inset maps within the next couple days. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  05:33, 8 January 2011 (UTC)
 * Thanks for all your help in this, is the new template ready to be copied over from the sandbox, or do you think more tweaking is required. Dave (talk) 05:06, 10 January 2011 (UTC)
 * I think we are very close, but a few more minor points. (1) Do we need alternative text for the inset? (2) A method may be needed to turn off the inset map, perhaps if the one passes "inset_map = none" or something. (3) I am assuming we will have the inset map turned on by default, if the map is given in by the Location map template. (4) Do we need code to move the inset from its default location to a new location, if the pin is close to the corner with the inset? (4) Is the syntax for specifying the location of the inset what we want?  I just want to make sure these issues are somewhat settled before a large scale roll out.  I will ping a few other users. Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  05:32, 10 January 2011 (UTC)
 * I will raise this on the New Zealand wikiproject talk page. Will it look good with long skinny countries like New Zealand, Japan, etc.? Kahuroa (talk) 08:02, 10 January 2011 (UTC)


 * See general solution, below: . Sometimes, a problem was solved years ago, but people forget. --Wikid77 08:08, 10 January 2011 (UTC)
 * I definitely agree that the Template Location map many, as proposed below, is an option. It would still require template changes to Infobox settlement to allow the change in sub-template. However, I do think what Plasticspork has coded in the sandbox is more elegant, namely as it will auto-place the inset in the corner, without the need of figuring out the co-ordinates and image sizes for any but the upper-right corner.


 * The point brought up below is a good one, for most states the shape leaves at least one corner where an inset should be placed, for about 4 or 5 there is no place to put an inset without obstructing the map. IMO, in those cases no inset should be used, and a 2nd map should be used if a context map for the location is required. Dave (talk) 17:29, 10 January 2011 (UTC)


 * As to the point of getting alt text working, this is trivially easy, my sandbox version has the alt text working, passed as a parameter stored in Template:Location Map .Dave (talk) 21:19, 10 January 2011 (UTC)

FYI, the immediate concern is over, as in the case of Thistle, I temporarily added a 2nd map to the infobox and the FAC has since closed. However, I still think this is a good idea. Given the most recent feedback in the sections below, here is what I propose as changes to plasticsporks attempt: Any objections? Using Plastiksporks test as a base, I can code these changes up myself, and I see this as low risk, as unless an article is changed to invoke an inset map, no inset map will be placed, no articles will be automatically changed. Please advise if there are still any concerns. Dave (talk) 01:23, 18 January 2011 (UTC)
 * 1) - Inset maps will not be automatic, must be invoked by a parameter (such as inset=yes or inset_map=filename)
 * 2) - Documentation will state that inset maps are only available in some jurisdictions and are not practical for states that have a nearly perfectly rectangular outline (such as Colorado), where a 2nd map should be used.
 * 3) - the defaults for the inset map to use and location can reside in Template:location map foo as proposed by plastikspork

Using Template:Location_map_many for inset images
Having special parameters for an inset map, can be a cumbersome special case, especially since, Template:Location_map_many solves the problem for the general case of several inset maps (or other images), overlaid onto a base map.

In the example above, note how the use of indentation helps to visually separate the parameters related to each of the 4 markers on the map. I would spend time optimizing {Location map many} to be very efficient, then emphasize how any inset map, or other overlaid image, is merely another marker placed on the map, with mark2size=50 or mark3size=80, etc. Meanwhile, widely-used inset maps are best "hard-coded" into a general map image, rather than crank-up a complex template every time a page is reformatted. However, for less frequent pages, using {Location map many} seems to be quite rapid for placing the inset map, plus other large towns in Utah on the same map. The website city-data.com was awesome about showing town-among-major-cities to give readers a better idea which major towns are near the "Sundance Film Festival" or other sites on a map. It has been years since I worked with these mapper templates, but they should be optimized to be as efficient as possible: we want people to place 3 or 5 or 8 markers (or insets) on a map without fear of "slowing" an article. To remind others about displaying multiple inset images, perhaps we should add a special section to Template:Location_map/doc about using {Location map many}. They need to know how to add any combination of inset maps, landmark images, and numerous other towns onto a map image. -Wikid77 (talk) 08:08, 10 January 2011 (UTC)
 * This solution violates the license of the inset maps (and markers), if they are not PD, but CC-BY-SA. The page with the license must be only 1 click away... Uwe Dedering (talk) 20:15, 10 January 2011 (UTC)
 * In cases of multiple images, it is the writer's responsibility to link license details, such as by adding simple caption text "(inset map: details)" where common sense governs the method of reaching the license. However, new users might not realize the license issues, so those issues should be added to the doc-page text about using overlaid images. Thanks for noting that concern. -Wikid77 01:06, 12 January 2011 (UTC)
 * It also requires manual coordinates and will break for even a 1px change in the dimensions of the inset map image. Case in point is the inset in the upper right corner is mis-positioned. My attempt at User:Moabdave/sandbox2 will also break for an image size change. That's why I like Plasticspork's version the best so far, automatically placed in the corner regardless of the relative sizes of the images. Dave (talk) 21:16, 10 January 2011 (UTC)
 * The pin-marker for each town or region marked on a map also requires manual coordinates in most cases, so the multiple inset maps at nearby coordinates are an easy extension of the first coordinates. On the other hand, when users ask for 2 inset maps (such as "Bavaria in Germany" and "Germany in Europe"), then the {Location map many} will handle all those concerns as well. -Wikid77 01:06, 12 January 2011 (UTC)

Show inset map as outset with city seal
Because half of the U.S. states are "square" there is no room to show an inset United States map without overlaying part of a state. Look at just 12 24 of the crowded U.S. state maps below. When a pin-marker for a town gets near the inset edge, then the inset map would have to in-your-face block another corner of the map. Instead, I would move the inset U.S.A. map as outset, perhaps alongside a state-flower image, or a town coat-of-arms seal:

With an outset U.S.A. map, all 50 states would appear similar in format, while allowing space beside the outset map for an image such as a flower, city seal, town skyline (etc.) to add to an article, rather than subtract by obscuring the state's map with an annoying, overlaid U.S.A. map which could be shown nearby, instead. If 25 of the U.S. states were not "square" then having 25 special inset maps would not be the complex problem it is. Simplify: put the U.S.A. map nearby, but as outset not inset. -Wikid77 14:00, 10 January 2011, revised 01:06, 12 January 2011 (UTC)
 * Red_paintbrush_Castilleja_miniata_close.jpg
 * Map of USA UT.svg
 * }
 * A couple of thoughts. First, the situation is not as bad as described, nobody is forcing an inset where one would not be helpful. Second, "half the states are square" is an exaggeration. Even with the examples given above, insets will easily fit in the lower right corner of Connecticut, Arkansas, Ohio and Montana. In cases where it would truly be impossible to fit without clipping state boundaries, such as Colorado, Wyoming and the Dakotas, an inset map would probably not make sense, unless the inset had an location override parameter. I would prefer to have at least the option of doing this as an inset for two reasons 1- doing it as an outset can be done now with existing templates. 2nd- many infoboxes are big enough as it is, no point in making them even larger to support a 2nd map as a second image. IMO, weather the map should be inset or outset is a case by case situation. Dave (talk) 16:31, 10 January 2011 (UTC)


 * I am not saying that insets cannot be forced everywhere, but half of the U.S. states are indeed "square" (or rectangular), so the space around the state depends on the specific map borders: note how Tennessee (above) has been drawn in a taller map, 3x times the height of the state, but several other states are mapped closer to their square state lines. Connecticut is mainly square but drawn as a smaller central box in its map. The issue is re-drawing the states as a minor part of their maps to justify allowing an inset map to also fit inside the state map. On the flip side, we could have a large US map as the main focus, with each specific state as just a minor inset near Florida. That would be another way to use inset maps, but I don't see the need to put a small U.S.A. inset overlapping a state, when a tiny outset map would be fine beside some other small image. Instead, I think an infobox for location should allow a small regional, outset map to show the general area, as a more general solution, with click-on image for licensing, and no worries about trying to shove an inset map onto Iowa, Colorado, Wyoming, Kansas, North Dakota, Oregon, South Dakota, New Mexico, Washington, Pennsylvania, Nebraska, Arizona, etc. -Wikid77 01:06, 12 January 2011 (UTC)

Noobish question
Hello all!

I would like to make location maps for other administrative divisions. The thing that I do not understand is where do you take the border and map center coordinates from. Can you give me a model (with an Open Street Map)?

Thank you! Compactforever (talk) 18:30, 12 January 2011 (UTC) (wikipedian from ro.wp)
 * Most of the maps I am familiar with were created using QGIS or another GIS software package. I am not aware of any that were made using Open Street Map, however, I'm sure it is possible. At WP:USRD/MTF (Wikiproject US Roads, Map Task Force), there is a tutorial on how to make a location map from GIS data, which is easily available for places in the United States. If you can find GIS data for your area of interest, that tutorial should still work. Dave (talk) 23:08, 12 January 2011 (UTC)

Northern England
Would someone please be able to make a template from this file: File:Northern_England_location_map.PNG ? Or at least tell me where I'm going wrong in trying to copy/paste file names and coordinates into existing example templates.

I'm struggling to make a template like this: Template:Location_map_England

It will be really useful for sport team location maps where the leagues are split between north and south of England.

I'd be really grateful, thanks! Delusion23 (talk) 14:45, 17 February 2011 (UTC)


 * Well. Try Location map Northern England. I just put it together and I have not even given it a test drive yet but I think its good. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:02, 17 February 2011 (UTC)
 * Hold on. Still working –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:14, 17 February 2011 (UTC)
 * Looks good to go. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:32, 17 February 2011 (UTC)


 * Wow, thanks very much! It's really helped stop all the team locations cluttering up the place like they did on the old England map. NPL Premier Division and NPL Division One North.

Float = center
I noticed someone else addressed this as well, but it was secondary to another problem, and the question was never addressed: Why doesn't float = center work as expected? If it's a CSS issue, you must know the "margin:3px auto" trick, which could be used to force the template to act the way most users would expect.

The lack of a centering option restricts the usefulness of this template in certain infoboxes and other circumstances. It would be nice to have this addressed. Wilford Nusser (talk) 12:00, 20 February 2011 (UTC)


 * I'm not an HTML wizard but what I do is wrap this template in a div block with align="center". I hope this helps. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:35, 20 February 2011 (UTC)
 * P.S. If your writing a new infobox template drop me a note on my user talk page. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:38, 20 February 2011 (UTC)
 * I added the "margin-left: auto; margin-right: auto;" for the "float=center" case. Revert/ping me if this causes a problem.  Thanks! Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  04:54, 22 February 2011 (UTC)

alt text problem
I am using the very impressive Location Map+ to show ancient woodland sites in English counties, to accompany a list of the woods. Using the full names as labels rapidly becomes illegible, so I thought I could label them with a reference number and use alt= and link= to bring up a full name when you point at a dot. This works fine in ME8 but both Firefox and Chrome just repeat the label= number. You can see it at List_of_Ancient_Woods_in_England. Is this something that can be resolved? or is there a better way of mapping the information. (A further problem is that link= is needed to bring up the name, but not all the woods have pages to link to (as yet...). Is that an acceptable use of the feature?) Any help or suggestions would be very appreciated. Thanks, RobinLeicester (talk) 21:41, 20 April 2011 (UTC)
 * The problem is nothing to do with this template. Mainly, it's the way that different browsers interpret the  attribute of the  tag when you mouseover the image. If you examine the page source you'll find code something like this:

<pre style="overflow: auto"> <img alt="Ancient Woods in Oxfordshire" src="http://upload.wikimedia.org/wikipedia/commons/thumb/5/58/Oxfordshire_UK_location_map.svg/250px-Oxfordshire_UK_location_map.svg.png" width="250" height="294" />


 * It's got four attributes, but crucially, no  attribute. According to this page, the mouseover text should be taken from the   attribute, not from the   attribute. Therefore, Firefox is being compliant in displaying nothing, whereas IE is non-compliant. The fix required here is a change to the MediaWiki software so that the   attribute is set for the  tag.
 * Alternatively, you could try raising a bugzilla ticket requesting that Firefox be brought in line with IE - but they'll probably reject your suggestion on the grounds that (as is so often the case) it's Mozilla who are following the W3C standards, and Microsoft who are bending them. You can't get Microsoft to fix anything, they just carry on their own sweet way ignoring the heck out of us users, whilst trying to think of new ways to make it worse for us. -- Red rose64 (talk) 22:33, 20 April 2011 (UTC)
 * You could just use a piped link for the label, e.g. label=1 .-- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 22:57, 20 April 2011 (UTC)
 * Alt text is really intended to aid the vision impaired. People have firmly held positions about how it should be used. You might look at Image map but it would involve a lot more work. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:10, 20 April 2011 (UTC)
 * Lots of good suggestions, but a) it would be quite a loss if the page and its content can't be edited by non-specialist users. b) the elegant piped link solution, produces links on the text (rather than the dot) with lots of red links with the words 'page does not exist' added to the mouseover boxes. Looking further at my original problem, the Location Map+ section works correctly on all browsers (blank areas of map show the alt text). It is the Location Map~ entries, with the alt text to the red dot image that gets lost. (I would think that correct alt text would help both sighted and vision impaired readers, if it could work.) Thanks, RobinLeicester (talk) 23:31, 20 April 2011 (UTC)

White space
If you look at the left-justified location map here, you can see the text on the right is jammed against the map. Can location maps be made to default, as thumbnails do, to provide an appropriate amount of white space? --Epipelagic (talk) 08:02, 22 April 2011 (UTC)


 * It seems like a good idea but backward compatibility is always a concern. If I have time I'll check to see what problems a wider margin might create. Someone else will have to code it. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 08:41, 22 April 2011 (UTC)
 * Will this only apply to maps with a caption that are floated left or right? –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 08:48, 22 April 2011 (UTC)

I've fixed this in the sandbox. The code now uses the image thumbnail classes if a caption is provided, so it should automatically get the right styling to sit properly next to text when floated (and otherwise looks just like an image thumbnail as well). The test cases page shows that the floating isn't exactly right, but it's much better than it was before. If there are no bugs I'll get this synced in a few days. Chris Cunningham (user:thumperward: not at work) - talk 09:07, 22 April 2011 (UTC)


 * Sounds good, Ill be back in the morning. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 09:12, 22 April 2011 (UTC)
 * After a bit of looking around, I found that Bristol mapbox uses float right. I think it can be substituted. However my search was not exhaustive and there might be other places where a location map is in a table or div block that is going to be affected. I like the change but there might be some collateral damage. I have another idea I'm going to check into. I hope someone else can look at this. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:21, 22 April 2011 (UTC)
 * Location map-line uses location map+ and would need to be modified. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:03, 22 April 2011 (UTC)

I added a float right example and it looks OK but not perfect. The Scotland example shows that something broke. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:48, 22 April 2011 (UTC)


 * If templates which call location map are broken it's probably because they're using  (which invokes the frame code) rather than   which doesn't. Bristol mapbox uses both, which is pretty pointless; I've removed the caption declaration there and that's fixed it. Looking at the Scotland example now. Chris Cunningham (user:thumperward: not at work) - talk 09:53, 23 April 2011 (UTC)


 * Sorry, there were two Scotland sections on the testcases page. See Scotland2. So now there are three samples. In the second case, using the sandbox, the 1px margin disappeared. I think it has something to due with border being defined in the class and in a conditional but I'm not sure. Also, there is something wrong about the right margin. Good luck with this. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 10:17, 23 April 2011 (UTC)


 * Ah, yes. It looks like the problem is that we can't manually specify  in the image code, which is how images get a border. I've gone back to manually hacking in an inner border. The only remaining problem is that the margins don't exactly match that of image thumbnails, but I'm not sure we can do anything about that. Chris Cunningham (user:thumperward: not at work) - talk 10:56, 23 April 2011 (UTC)
 * I think I can fix this but I'm going to have to fit the time to do it into other things. You have a great idea here. I'll work in my user space and get back here when I have something to show you. It might be a day or more. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 02:03, 24 April 2011 (UTC)

I move a modified version into the sandbox. Although the code generated is does not exactly match that generated by a thumb image, the output is darn close. Basically, I moved the width def for the framed version into the div that uses case thumbinner. I also spend some time on code beatification but it's still a rat's nest. I think it's clean but I tend to miss stuff so please take a good look at it. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 08:47, 24 April 2011 (UTC)


 * Wonderful! I'll sync this in a day or so when I've got time to monitor for any fallout. Many thanks for this. Chris Cunningham (user:thumperward: not at work) - talk 11:54, 24 April 2011 (UTC)


 * Good, I'm going to ask Plastikspork to drop by and take a look. That guy really knows where his towel is. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 15:46, 24 April 2011 (UTC)
 * Looks good at first glance. I was thinking we might want to put this in Location map start/Location map marker/Location map end, then have the other ones (like this one) just use that one.  The last time I did some updates, I ended up updating at least three or four of them, since they all use basically the same code.  Thanks! Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  00:41, 25 April 2011 (UTC)


 * Wouldn't we be better just doing away with the composite templates? A look at the transclusions indicates that the only articles using them are a series of Football League season summaries which could presumably be migrated to location map many or the like. The next step would be to make location map many the master template and have this subclassed there instead. Chris Cunningham (user:thumperward: not at work) - talk 10:54, 25 April 2011 (UTC)

I agree that currently the family of templates is not easy to maintain. Here is a list of templates I know of that have related functionality:
 * Location map
 * Location map+ and Location map~
 * Location map many
 * Location map skew
 * Location map polarx

I think the easiest way forward is to modify Location map+ and then use it as a backend for the others and that it would be fairly strait forward to use it write Location map and Location map many as using Location map+ as a core template. I going to try this using sandboxes in my user area but I'm going need some time to do it. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:54, 25 April 2011 (UTC)


 * I have an example using Location map+ as a backend for Location map in my user space. You can see it here and the testcases here. It does not implement the modification we have been discussing. The links are to archived versions so please don't change them. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:38, 25 April 2011 (UTC)
 * Yes, use Location map+/Location map~ as the base. Looking at the code for Location map many, I now remember doing this, which was a step in the right direction.  We should do the same with this template and then get rid of Location map start/Location map end.  By the way, we could actually add a places to this template and make it have the same functionality as Location map+.  As for Location map skew and Location map polarx, we should kill those and focus on documenting the general mapping features of this template.  I suggested this to the author of that template but he was not receptive.  Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  00:13, 26 April 2011 (UTC)
 * I'm working on it. I ran into a snag and I wasted a lot of time on it but I making progress now. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 09:20, 26 April 2011 (UTC)

There is a new version of Location map+ in that templates sandbox which implements all the changes Chris Cunningham and I have been working on. I am confident that it's ready for prime time. I also wrote a front end for this template and it is in this template's sandbox. Currently it transcludes the sandbox version of so it should not go live until after that template is updated. There are so many articles that transclude this template that I think it would be a good idea to implement and then see if any bugs show up. transcludes so articles that transclude it will also be affected by the change. I'm not going to request an edit on the location map+ discussion page as I think either Chris or Plastikspork ought to do it. P.S. I added 3px padding above the default caption. –<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 01:08, 27 April 2011 (UTC)
 * Nice work. I synced the sandbox with Location map+ and so far I see no issues.  Thanks again! Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  01:21, 27 April 2011 (UTC)

Problem in IE6
I move the current discussion to this new section. &#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:53, 6 May 2011 (UTC)


 * The latest edit seems to cause problems with Internet Explorer 6. I have no problems at home with IE8 or Firefox 3.6, but at work I have no choice but to use IE6. (Don't tell me to upgrade my browser, that option is not available at my workplace.) What goes wrong in IE6 is that the spots are drawn too far south. It looks as though they are being plotted relative to the outer frame (i.e. including the text caption below the map) instead of the map. If I use a long, multi-line caption, the problem gets worse. This problem seems to have arisen only within the last few weeks and it affects only, not . -- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 00:38, 6 May 2011 (UTC)


 * I know this is probably a dumb question but did you have this problem with before the upgrade. &#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 06:02, 6 May 2011 (UTC)


 * No, Location map+ was working perfectly well on IE6 until very recently. -- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 18:48, 6 May 2011 (UTC)


 * I don't have access to IE6 but I've been hacking anyway. I would appreciate it if you you could check and see of the version now in the sandbox works for you. There are test cases in my user space. Feel free to use that page. The Four Corners marker is a good test for accuracy. Thanks.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:53, 6 May 2011 (UTC)


 * Thanks. I won't be able to test until Monday. I'll report back then. -- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 22:19, 6 May 2011 (UTC)


 * Sorry, the change you made makes no difference under IE6. -- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 17:52, 9 May 2011 (UTC)

Not even Microsoft websites support IE6 anymore, so we can safely call it a former browser for all practical purposes. And good riddance. Zocky | picture popups 20:32, 9 May 2011 (UTC)


 * Statistics show that IE6 currently has a 2.5% share which is about the same as Opera. I'll try to work on it as I get time.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:08, 9 May 2011 (UTC)
 * Opera has the majority market share in several countries, IE6 doesn't. The development of Opera continues, and its long-term trend is stable. Meanwhile, IE6 has been out of date for 10 years, and has lost half its market share in the last 6 months and is expected to fall under 1% in the next 6 months. And crucially, Opera is largely standard-compliant and doesn't require special handling, like IE6 does.
 * All in all, if anybody wants to bother with it, go ahead, but it's hardly worth the time and effort anymore. Zocky | picture popups 18:37, 10 May 2011 (UTC)
 * No argument here. I was making a observation and I did not mean to imply that they were comparable in any way. &#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 05:04, 11 May 2011 (UTC)

Need help with Location map+
Hi. I'm trying to create a map using Location map plus, at European Youth Parliament, but I can't get it to work properly. Could someone please help me? Thanks in advance. P. S. Burton (talk)  20:58, 8 May 2011 (UTC)


 * Looks like your doing pretty good. You can ask your question here or on my talk page.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:51, 8 May 2011 (UTC)


 * I worked on Template:Location map Europe2 and it should work now. You might still have a problem fitting all the captions. I used the (currently undocumented) position parameter to move Kronberg to above the marker. The documentation for this template is not that great. If you need more help just ask.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:10, 8 May 2011 (UTC)


 * You might try using numeric labels and providing a map legend as the caption.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:13, 8 May 2011 (UTC)

Help with Location map/marker
Hi. We're trying to create the Template:Infobox UK place over at cywiki (cy:Nodyn:Gwybodlen lle'r DU is what we have), but are having problems with our version of the above template; cy:Nodyn:Location map/marker is what we have, but while trying it out on cy:Alloway, we get the error (click in to show error, for some reason it's not showing up!) <div style="position: absolute; z-index: 2; top: Expression error: Missing operand for *%; left: 83.3%; height: 0; width: 0; margin: 0; padding: 0;"> I've looked everywhere, and the only place I can find similar code is our Nodyn:Location map/marker. Can someone offer some help? Thank you. --  Xxglennxx  (talk • cont.) 01:08, 24 May 2011 (UTC)


 * I created a simple test case for cy:Nodyn:Location map at cy:Nodyn:Location map/testcases and it looks good. So I doubt its a problem with Location map. It might be a typo somewhere in cy:Nodyn:Gwybodlen lle'r DU.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 06:04, 24 May 2011 (UTC)

Colombia and Buenos Aires maps
Greetings,

Is there a way we (someone) can make a more concentrated version of the Colombia and Buenos Aires maps. I think they cover too much of the surrounding geography and could work better if they were more narrowly focused. Thanks. Digirami (talk) 21:30, 31 May 2011 (UTC)

Fixed float bug
So it turns out that Location map+ and Location map many float left by default. See Template:Location map+/testcases. So I tweaked the sandbox version of this template so float defaults right which is the current default for this template. See Template:Location map/testcases. It is very late right now and I'm sleepy so please check by hack before the sandbox goes live.

The other default should be checked as well, so let's hold off awhile. I really think that all three templates should have the same defaults.

Sorry that I said in a sandbox edit summary that it was good to go. I really thought it was.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 07:11, 22 June 2011 (UTC)
 * Think it would be nice if the default is not any float, but the map breaking in the text. This is useful for cases where the map is large and squeezes the text, especially on smaller screens. JMK (talk) 09:28, 22 June 2011 (UTC)


 * I think Chris Cunningham's fix at Location map+ will solve the problem but I'd like to go slow. I going to see if I can check for any problems with unexpected output.


 * JMK, I guess you mean using using "float:none" as the default. I think we are, sort of bound by what has become expected behavior. I think there has been an attempt to mirror the behavior of image files. Consistency is important here, IMHO.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 15:13, 22 June 2011 (UTC)


 * Indeed. Changing the default at this point isn't an option. Too many existing transclusions rely on a certain default (i.e. right). I haven't exhaustively tested the fix I put in place but it is logically correct and seems to work where I need it to (testcases and in the location map sandbox). Chris Cunningham (user:thumperward) - talk 15:23, 22 June 2011 (UTC)


 * See Template:Location map/testcases. There are less than 150 articles that use Location map+ without a value assigned to float. I'll check them today.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 17:52, 22 June 2011 (UTC)

I've done fairly good check of the articles and templates that transclude Location map+, and I fixed a few things. There was nothing really bad. So, I think, the modification of that templates is OK. I looked for any other differences in default behavior and did not find anything of significance.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 23:14, 22 June 2011 (UTC)


 * Did you chec location map, which now trancludes this? It was location map's omission of a default float which brought this bug to light in the first place. And if it comes down to either having to modify location map or keeping the default as it is, I'd rather the default were kept as it is, simply because people are used to it. Chris Cunningham (user:thumperward) - talk 12:41, 25 June 2011 (UTC)


 * Everything seems to be fine. The float is to the right, by default, as it has been, for and Location map. I believe it is the way we want it to be. Files (thumbs) have the same default float. Everything is good it seems to me. What might need to be modified?&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 14:37, 25 June 2011 (UTC)


 * Nope, I'm fine with that. My comment was in regard to the above discussion about changing the default float to, which I don't think is a god idea. Chris Cunningham (user:thumperward) - talk 10:03, 26 June 2011 (UTC)

Possible modifications
Once things settle down a bit, I'd like to talk about some minor modifications.
 * 1) I think error handling could be improved. The obscure default error messages generated by the parsing functions are inadequate.
 * 2) I also think the markup should be more readable so that it will be easier to maintain.
 * 3) The position of labels gets messed up if large marks are used. I think their position should be relative to the size of the mark.

Of course the documentation needs to be updated to reflect the options that Location map+ has that Location map did not have. I'll work on these one at a time unless others would care to take on a task. Are there tweaks that others would like to see?&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 15:25, 25 June 2011 (UTC)

Bug fix
Currently the template does not pass. This is fixed in the sandbox version. It has been tested and I am confident that the fix will work.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 08:56, 30 June 2011 (UTC)
 * ✅ &mdash; Martin (MSGJ · talk) 16:36, 30 June 2011 (UTC)


 * Can the documentation be updated to indicate how this new parameter is used exactly? It appears you set it to 1 to use the relief map? How does one associate a relief map with the location map template if there isn't one currently set up? RedWolf (talk) 17:07, 30 June 2011 (UTC)
 * Setting any value for the "relief" parameter (at least in Infobox protected area) will result in the use of the relief map. In order to utilize a carefully created relief map (that already matches the coordinates of the existing map), all you need to do is add the file under an "image1" parameter in the location map template.  See this diff for an example.  –  VisionHolder  « talk » 19:29, 30 June 2011 (UTC)

edit conflict


 * I'll get to the documentation as soon as I can. In general there are three methods that can be used to display a relief map.
 * Use the AlternativeMap parameter to specify any image that has the same geological edge coordinates and projection as the the default image used by the map template.
 * Assign any value to the relief parameter if the map template shows an alternate map image below the default image.
 * Sometimes another template exists that uses a relief map. See Location map USA2 and Location map USA relief. Using the first template with relief=yes displays the same map as the second.


 * Your second question more difficult and I tried to come up with something but I do not know enough to formulate a general answer. The major problem is finding a map image that has the same geological edge coordinates and projection as the the default image. You might ask at WikiProject Maps.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:25, 30 June 2011 (UTC)

Locations clickable to access geohack mapping
Apologies if this an old chestnut, but I have searched for information without success. It would be useful, at the List of castles in England page, to have each location on a map clickable to access geohack mapping facilities. All that would be necessary is to have the small location image linked to the required href, in the same way that the whole map image is currently linked to the map source page. Is this facility available, has it been requested, if not can it please be implemented? Paravane (talk) 17:51, 17 July 2011 (UTC)
 * Do you mean as demonstrated at ? -- Red rose64 (talk) 18:51, 17 July 2011 (UTC)
 * If you mean what I think you mean, it might be an interesting idea. I'll look into it.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 18:59, 17 July 2011 (UTC)
 * If I'm not mistaken, at the link is only to a wiki page, a similar facility but it would be useful to be able to link instead to geohack, and it could be done via the location image spot.  It might also be helpful if it could be done by opening a new browser window, to avoid leaving the wiki page. Paravane (talk) 19:19, 17 July 2011 (UTC)

This works for Windsor. I strip the others for simplicity. I do not recommend the use of Location map start because it currently receives little support. P.S. I got the URL by going to the Windsor Castle page and clinking on the coordinates link. I have a another idea and if it works I'll get back to you on your talk page.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:15, 17 July 2011 (UTC)
 * You could ask at Template talk:Coord to see if one of the subtemplates will generate the GeoHack link. -- Red rose64 (talk) 20:26, 17 July 2011 (UTC)


 * Notice that I added a caption with causes the map to appear more line thumb image.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:31, 17 July 2011 (UTC)


 * Just the job! If the link could be generated automatically by the location map templates, for the given coordinates, that would make life easier for the editor!  In that case the template could perhaps be assigned a parameter, clickable=yes/no.  I wonder also about an option to suppress the link to the map source, that would make the geohack link more noticeable, and avoid the need to look where you're going before you click. Paravane (talk) 20:57, 17 July 2011 (UTC)


 * I'll reply on you talk page.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 21:52, 17 July 2011 (UTC)

Scotland mainland
<pre style="overflow:auto"> The coordinates for are somewhat off. The horizontal scale is about right, but the vertical scale is significantly compressed, see central map at right. The places mapped are at or near the extremities of the Scottish mainland: Ardnamurchan Point, Cape Wrath, John o' Groats, Lamberton, Scottish Borders, Mull of Galloway, Rattray Head. The other two maps are shown for comparison. -- Red rose64 (talk) 14:49, 22 July 2011 (UTC)


 * The edge coordinates used by are way off. I'm not an expert at this but I try to fix it.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 18:45, 22 July 2011 (UTC)
 * I gave a good go but the map seems to be distorted. I put a warning message on the template. In my humble opinion it is not worth any more time.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 20:06, 22 July 2011 (UTC)

Fix for mobile version
Hi. In mobile view there is a bug in German Wikipedia's copy of "Location map". As you can see here, the horizontal position of the marker is wrong, as it varies with browser window width. The English version works just fine.

Are there some changes you made to the original template in order to fix location map for mobile view? Regards, --Church of emacs (Talk) 07:23, 29 July 2011 (UTC)


 * Nevermind, it seems dewiki just has a different version --Church of emacs (Talk) 21:28, 1 August 2011 (UTC)

Red dots in wrong position
The red dots on the maps for Cheetham Close and Rivington services are in the wrong place, but when clicking of the coordinates and selecting one of the maps at GeoHack they are in the correct place. Could someone please look into the problem and fix it. Thanks HLE (talk) 18:25, 4 August 2011 (UTC)
 * They look in the right places to me. How far off do you believe them to be? -- Red rose64 (talk) 18:41, 4 August 2011 (UTC)
 * Using Firefox, they look good to me too. It might be your web browser. If you see a problem, it would be interesting to know what browser and version you use.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 19:55, 4 August 2011 (UTC)

Had a problem with my browser, but now appears ok. Thanks anyway. HLE (talk) 15:40, 5 August 2011 (UTC)
 * This seems to be exactly the same problem that I reported earlier on this page at . I am getting the same symptoms (when I use my employer's archaic IE6) with Cheetham Close and Rivington services, just like the symptoms I reported in May. But I don't get the symptoms with, which I believe does not make use of Location map's caption but supplies its own caption (outside of Location map). The good news for me is that my employer's IT department has announced an upgrade from IE6. The bad news is that the rollout has been postponed due to compatibility issues. -- <b style="color:#FFFF80;background:#006000"> Dr Greg </b> talk 20:08, 5 August 2011 (UTC)

Why no just use Google™ Static Maps?
Why not just use Poof, here's a static map: Probably link it back to Google maps to satisfy their terms of use and you are all set. Of course if Google goes down so do you, but they wouldn't be so rude as to do that. Jidanni (talk) 22:53, 20 August 2011 (UTC)
 * http://code.google.com/apis/maps/documentation/staticmaps/ instead of rolling your own?
 * http://maps.google.com/maps/api/staticmap?sensor=false&size=180x241&markers=24.181668,120.866215&zoom=7&maptype=terrain
 * Probably because that would require hot linking to their images. We do provide links to google maps through the coordinates link (see coord).  Plastikspork <sub style="font-size: 60%">―Œ <sup style="margin-left:-3ex">(talk)  22:55, 20 August 2011 (UTC)
 * That's what their images are there for, to be hotlinked to. Provided you also make the image itself a link back to Google Maps, as their Terms of Service intends. Which in fact would also be a convenience to the user, compared to what happens if they are so unfortunate as to click on your current images... the just end up seeing the image file, without the red dot. "Great". Jidanni (talk) 23:47, 20 August 2011 (UTC)


 * There, http://code.google.com/apis/maps/terms.html
 * (h) No Use of Static Maps API(s) outside a Web-Based Application (Except with a Link to Google Maps). You must not use the Static Maps API(s) outside of a web-based application unless...
 * So maybe you can even hotlink them... but why when you can just link them to the corresponding maps.google.com link the user would expect... There, I recommend http://mapki.com/wiki/Google_Map_Parameters to get you started. In particular the q=loc: would allow you to fashion a link to maps.google.com that looks almost identical to the red pin on the static map... Jidanni (talk) 00:35, 21 August 2011 (UTC)

How about because they are not free? ro.wp and de.wp already gave up the static maps in favor of OSM, which is free and quite good in most countries (certainly better than the static maps). If you want to test it, just go to the German and Romanian interwiki from Bucharest and click on "Karte" and the globe, respectively. You should see a very nice map with related articles on top.--Strainu (talk) 00:56, 21 August 2011 (UTC)


 * Well OK I compared
 * http://www.openstreetmap.org/index.html?mlat=44.4325&mlon=26.103889&zoom=12&layers=B000FTF
 * http://maps.google.com/maps?ll=44.4325,26.103889&spn=0.1,0.1&t=m&q=44.4325,26.103889
 * and well, which would you trust to get to grandma's house☻Jidanni (talk) 01:08, 21 August 2011 (UTC)
 * I personally always trust OSM, since people I know and trust have designed/imported most of the map of Romania :) I can assure that for areas covered only by Google mapper (the crowdsource service which somewhat resembles wp) and not by Google itself, OSM coverage is comparable if not better.
 * But the main argument for OSM is still it's licence (CCBYSA, but moving to ODBL nowadays). It's bad enough the Foundation gave up the free software excusivity, we should not do the same--Strainu (talk) 17:11, 21 August 2011 (UTC)

CSS
Also the red dot (now a pushpin) would finally stay on the map even in when viewed devices without CSS. Where currently your maps all lose their red dots. Jidanni (talk) 23:47, 20 August 2011 (UTC)

Tons of placenames
Allow us to compare how your years of effort, match up with my 93 seconds experiment, That's right, tons of placenames on the map for free too. Why reinvent the wheel? Sure it is corporate lock-in... but doesn't Google just love Wikipedia too? Save your duplicated effort for something ... that at least looks as good. (Yes, I recommend still hardwiring the coordinates into the markers= instead of relying on the luck of the name match.) Jidanni (talk) 00:03, 21 August 2011 (UTC)
 * http://en.wikipedia.org/wiki/Boracay
 * http://maps.google.com/maps/api/staticmap?sensor=false&size=175x231&markers=Boracay&zoom=4

Map Types
OK, let's talk a little about map types. Maybe what you really want is a physical map... yes, that would be more proper for an encyclopedia. Voila, Oops, there go the aforementioned tons of placenames. Errg... Yuck. Well, its all about choice. You be the judge. So I do believe we have a deal. Sign on the dotted line.......☻ Jidanni (talk) 00:21, 21 August 2011 (UTC)
 * http://code.google.com/apis/maps/documentation/staticmaps/#MapTypes
 * http://maps.google.com/maps/api/staticmap?sensor=false&size=175x231&markers=Boracay&zoom=4&maptype=terrain


 * One major complication: Wikipedia is a free resource, Google maps isn't. I'm not even sure if we could hotlink Google maps without at all without violating copyright (static images from Google maps are routinely deleted as copyright violations). Content on Wikipedia has to be available under a free license, not least because of consequences for downstream users.
 * We could integrate other maps such as that produced by coord, but that isn't there yet IMO. I don't think the quality is good enough yet.--Nilfanion (talk) 00:24, 21 August 2011 (UTC)


 * Nah, I put Google's TOS above. Now all you have to do is tell Google that if they don't give you a free license, you'll be featuring them in your robots.txt ! That ought to teach 'em. Now all that is left is for you to hijack the innards of this template to point to Google... Jidanni (talk) 00:41, 21 August 2011 (UTC)
 * Not doable, I'm afraid. Google won't be releasing their content under a free license (not least because its not entirely theirs, but their partners such as Tele Atlas) any time soon. And their current TOS doesn't allow usage by Wikipedia - pretty much every part of section 10 is an unacceptable restriction for us. We can link to their content, and possibly make it easier for our users to get there (by eliminating choice: taking them straight to Google, instead of giving them the choice of Google, Bing, Openstreetmap etc). We cannot hotlink their content.--Nilfanion (talk) 00:46, 21 August 2011 (UTC)
 * Now how am I going to get out of here and save face at the same time? Ah, a preference... allow the user to set a preference for Google maps in his Preferences, then we haul in the Google maps as I proposed above. Of course we should give him a mind numbing plethora of those other inferior map choice checkboxes to choose from so it is clear that he was the one who picked Google maps, not us. And of course we should include the current original flavor (I like the little map) choice too. Of course I could be wrong, however my time is up.Jidanni (talk) 01:08, 21 August 2011 (UTC)
 * I love it!!! Muah! 151.200.243.27 (talk) 01:36, 21 August 2011 (UTC)

Privacy / Terms
The reason that it's not being used doesn't have to do a lot with Google's Terms as Use as much as with our own (Wikimedia Foundation) Privacy Policy. Hotlinking to a third-party service violates that policy by sending data about the readers to Google without their consent. Krinkle (talk) 20:46, 24 August 2011 (UTC)

Polar maps
See WP:Templates for discussion. Thank you. 198.102.153.2 (talk) 17:09, 30 August 2011 (UTC)

Edit request from Tcroach, 4 September 2011
I believe that on the Location Map included in the article, the locations of where Alan Canfora and William Schoeder were shot have been switched: I believe that Canfora was relatively close to the National Guard and was wounded in the hand; Schroeder was shot at a great distance and killed. If the Location Map cannot be edited, perhaps a note could be added to the text noting the discrepancy.

Tcroach (talk) 20:29, 4 September 2011 (UTC)
 * Which article would that be? At a guess I would say that an incorrect latitude and/or longitude has been used, and if so, it should be a case if making a simple edit to the article concerned. This is the discussion page for improvements to the general template, and does not deal with specifics. -- Red rose64 (talk) 20:54, 4 September 2011 (UTC)

Disabling link to file page
I've seen a few comments that when readers click on the map, they (reasonably) expect it to link to a higher resolution version of the locator map. Instead, they end up with version of the underlying blank map - which isn't what they expect, and is entirely useless for that reader. The ideal behaviour would be for it to give what the reader expects, but that is probably hard to do.

However, disabling the link entirely (by use of link=, as flag does) should be easy to do. Some benefits include removal of the link to an "irrelevant" file and also in cases where the label has a defined link, it means if the reader misses the label, they won't get the wrong link. The biggest complication is that this might break the file's attribution path. Thoughts?--Nilfanion (talk) 00:45, 5 September 2011 (UTC)




 * Disabling the default link to the image description page is problematic. Many images, including images of maps, are not in the public domain. For example the image used by Location map USA is licensed under both the the Creative Commons Attribution-Share Alike 3.0 Unported license (CC BY-SA 3.0) and the GNU Free Documentation License (GFDL). Its my understanding that the link to the image description page satisfies the attribution requirement of the CC BY-SA 3.0 license, and the requirement that of the text of the GFDL be included with licensed document. I'm not an expert on this, so I might be wrong. One way around this is to include a link to the description page by using something like [[file:desc-20.png|15px]] in the map to the left. The [[file:magnify-clip.png|15px]], at the bottom left of a thumbnail image, serves the same purpose. P.S. Images commonly used as a mark, such as [[file:Red pog.svg|10px]], are in the public domain.&#32;–<b style="color:#355E3B">droll</b> <b style="color:#704214">&#91;chat&#93;</b> 04:24, 5 September 2011 (UTC)
 * }
 * Yep, that's about my understanding of the situation too - some sort of link being required for copyright purposes. I do think it would be helpful be to present that file link in a different way - for instance tagging it onto the map's caption. That makes links from the locator dot/link more practical as it removes the risk of the user missing it and getting the wrong thing.
 * As location map is called by other templates, that would mean location map itself would have to allow a no-link image, and editors would then have to add the alternative link on a subtemplate. If a [[file:desc-20.png|15px]] was used in the corner, there would need to be a parameter to specify which corner, for those cases where insets could be obscured.--Nilfanion (talk) 23:20, 5 September 2011 (UTC)
 * As location map is called by other templates, that would mean location map itself would have to allow a no-link image, and editors would then have to add the alternative link on a subtemplate. If a [[file:desc-20.png|15px]] was used in the corner, there would need to be a parameter to specify which corner, for those cases where insets could be obscured.--Nilfanion (talk) 23:20, 5 September 2011 (UTC)

New map
Is there a procedure to make or request for a new map? Another user made a request to use an old map of Italy (File:Kingdom of Italy 1919 map.svg) for the 1934 FIFA World Cup, and probably it can be used in other articles, too. (The Giro d'Italia in that year, the national football competitions, et cetera.) --EdgeNavidad (Talk · Contribs) 09:52, 25 September 2011 (UTC)
 * Graphic Lab/Map workshop --Obersachse (talk) 21:16, 26 September 2011 (UTC)
 * I'm, sorry, my original request was probably not clear. The "Map workshop" where you link to is the place where I would request creation of the map. The map already exists, but I would like it to be able to be used in Location map. --EdgeNavidad (Talk · Contribs) 17:18, 27 September 2011 (UTC)
 * So do you want to request the creation of a location map template? I don't know a special place for such requests. So let's discuss your request right here. If I should create a template for you I would ask about the purpose of the template, the existence of a map, do you know the coordinates of the map borders (geographic limits of the map) and the kind of the projection. The mor answers you can give the easier it is to create such a location map template. --Obersachse (talk) 19:15, 27 September 2011 (UTC)
 * the purpose of the template: the first use is to show the playing locations during the 1934 FIFA World Cup. The article now uses a map of current Italy, but the borders are wrong. As I said before, it also suits articles about Italy between 1919 and 1947, for example Serie A articles for that time.
 * the existence of a map: File:Kingdom of Italy 1919 map.svg, as I said above.
 * coordinates of the map borders (geographic limits of the map): The user that made the map did not indicate this...
 * the kind of the projection: Equirectangular, I'm 99.9% confident, but the user did also not indicate this.
 * I understand that the map borders coordinates are important. Would it be possible to use 35.3°-47.4° N, 6.2°-19.0° E as a first approximation, and show me where these numbers are, such that I can do the finetuning myself?
 * And is this all the information required? --EdgeNavidad (Talk · Contribs) 20:17, 27 September 2011 (UTC)
 * Okay, give me some days and I'll do it. Would you like to have the map with text or without? --Obersachse (talk) 18:08, 28 September 2011 (UTC)

Map call name
In the examples given, a certain USA map is called / sourced by {{Location+|USA2..., but how does one know that name beforehand? It may have been USA3 for all I know. Where does one see the name? - as the file name happens to be "File:Usa edcp relief location map.png". JMK (talk) 19:33, 15 November 2011 (UTC)
 * I assume that you mean {{tlx|Location map+|USA2|...}}, because there isn't a template named {{tlx|Location+}}. See {{cl|Location map by country templates}} where Template:Location map USA2 is listed. Basically, if you see something in there, you omit the  part, which in this case gives  . -- Red rose64 (talk) 20:04, 15 November 2011 (UTC)
 * Thanks, that is what I wanted to know. But what about File:Guernsey location map.svg. Can it be used as a pushpin map, and which name should be used? Not a country, so I'm stuck again. JMK (talk) 20:19, 15 November 2011 (UTC)
 * As it stands, File:Guernsey location map.svg can't be used in location maps generated using either {{tlx|location map}} or {{tlx|location map+}}, because it's not linked to any template in the Location map family. Such a template would need to be created; but this may not be necessary: see File:Channel Islands location map.svg, which is linked to a suitable template. This is Template:Location map Channel Islands, i.e. use {{tlx|location map|Channel Islands|...}} or {{tlx|location map+|Channel Islands|...}}. To see it in a real-world example, have a look at Guernsey Airport. -- Red rose64 (talk) 21:00, 15 November 2011 (UTC)
 * Thanks once again, that is what I need. JMK (talk) 21:45, 15 November 2011 (UTC)

Alaska
And could someone perhaps prepare an Alaskan location map with the islands and peninsulas excluded? That would be useful as one can focus on the mainland, with a more useful scale. JMK (talk) 19:49, 15 November 2011 (UTC)
 * Assume that you are thinking of Template:Location map USA Alaska. The islands and peninsulas are just as much a part of Alaska as Juneau... from where you can't get to Anchorage without using a bridge, boat or leaving the USA entirely. -- Red rose64 (talk) 20:04, 15 November 2011 (UTC)
 * Ugh, that map is awful. Could someone make a new one entirely (something like this), now that this template supports polar coordinates? The skew on that map is so ridiculous, it makes my state almost unrecognizable. No opinion on whether the Aleutians should be cropped (not totally unreasonable considering how huge they are, but I'm leaning towards no). Calliopejen1 (talk) 20:15, 15 November 2011 (UTC)

regional and provincial maps of Italy
I have begun to create regional maps of Italy to illustrate the Italian Army unit disposition over the last fifty years. The first template I created is for the province of South Tyrol: Template:Location map South Tyrol relief. However when I tried to create a map+ map for the Alpine Brigade Tridentina I get the following error message: Alpine Brigade Tridentina. Could someone please point out the error to me? I can't find it! Also I would like to create maps for the Italian regions: namely relief maps for each of the following:


 * 1) Veneto & Friuli-Venezia Giulia regions
 * 2) Trentino and South Tyrol region
 * 3) Piedmont, Liguria, Lombardy and Aosta region
 * 4) Emilia Romagna region
 * 5) Tuscany, Umbria, Marche regions
 * 6) Lazio, Abruzzo, Molise regions
 * 7) Campania, Apulia, Calabria, Basilicata regions
 * 8) a map of Northern Italy (from around the Southern tip of Tuscany up to Austria)
 * 9) a map of Central Italy (from around Bologna south to Naples, with Rome in the maps center)
 * 10) a map of Southern Italy from Rome southwards (with only some part of Sicily)

Maps for Sicily and Sardinia already exits. Can anyone help? What's the best way to create this maps. Thanks in advance for any help, noclador (talk) 09:22, 18 November 2011 (UTC)

label width
For whatever reason, a person might want to increase label width but not increase label font size. Right now, the only way to increase the width of the label is to change the font of the label (the width is a static 6em's). Open up the source, search for: width: 6em; (emphasis added -- it only occurs once) and change that to width: em; (emphasis added). Then add something in the documentation about a label width value and that it should be given as a straight number but that it'll be parsed in em rather than px, so as to scale with an increased font size if the font is changed by a screen reader. Banaticus (talk) 04:27, 26 November 2011 (UTC)
 * Yes check.svg Done It was a little more complicated than that, since the "6em" actually lives in Template:Location map~. Anomie⚔ 03:49, 28 November 2011 (UTC)

help with border coordinates!
Can someone please help me find the correct border coordinates for this map: Location map Northern Italy relief? I have been trying for an hour to figure out how to find the correct border coordinates, but whatever I tried the result (when adding cities like: Verona, Turin, Udine, etc.) was that they were either to far in the East, to high in the North, off to the right or off the map!. If anyone has the ability to figure out the coordinates - please be so kind add them to the template. Thanks very much in advance!!! noclador (talk) 08:39, 28 November 2011 (UTC)
 * hello? anyone reading this??? thanks, noclador (talk) 07:41, 30 November 2011 (UTC)
 * The location map templates assume an equirectangular projection - which means lines of latitude evenly spaced horizontally and lines of longitude evenly spaced vertically. But the map description at File:Northern Italy topographic map-blank.png states that it is using a "Lambert conformal conic projection". A template would need very complicated formulas to know where to position overlay points (such as the formulas at Location map USA2). So, unless someone can work out what formulas would be needed, or recreate the map with an equirectangular projection, your map which will not be accurate as a location map. — Richardguk (talk) 12:48, 30 November 2011 (UTC)
 * :-( oh, thanks for the answer! that explains while some points are wide of the mark, while others almost on the correct spot,... I did not know about the projection and just took a relief map of Italy. Thanks a lot for the help Richardguk. noclador (talk) 15:06, 30 November 2011 (UTC)