Talk:Aqueous homogeneous reactor

Use statement
At his website, Bruce N. Hoglund states:

"Responsible use is allowed as long as the author is cited." DV8 2XL 03:17, 28 September 2005 (UTC)

Boiling Point of Water
Is the highest temperature of the reactor core the boiling point of water at the pressure the reactor is operated at, which means a maximum core temperature of 100 degrees Celsius at atmospheric pressures? If so, does that not reduce the efficiency of the generator by limiting the maximum temperature of the reactor?
 * some things to consider: It was not operated at atmospheric pressure; the boiling point would be elevated by the presence of the uranium salts; in any case the reactor was used as a neutron source, not a steam generator 70.51.184.193 23:50, 29 December 2005 (UTC)

need reference or more discussion
"At Santa Susana, California, where a series of tests titled: The Kinetic Energy Experiments were performed in the late 1940's, control rods were loaded on springs and then flung out of the reactor in milliseconds. Energy output shot up from ~100 watts to over ~1,000,000 watts with no problems observed."
 * Presumably the MW output was momentary? Is there a reference to these experiments? How does the selfmoderating work?GangofOne 11:41, 30 April 2006 (UTC)

"Aqueous homogeneous reactors were sometimes called water boilers, although they are not boiling water reactors, as they seemed to be boiling their water, but in fact this bubbling is from the production of hydrogen and oxygen as the radiation, and especially the fission particles, dissociate the water into its constituent gases. "
 * But that must be hot enough to boil as well; or is it high pressure? Don't the H and O immediately recombine? GangofOne 11:41, 30 April 2006 (UTC)
 * The hydrogen and/or deuterium would only recombine immediately with oxygen if they met up during the very short interval while at least the oxygen was still in the form of highly reactive singleton atoms (see Nascent state (chemistry)). Judging by the experience of heavy water moderated CANDU reactors, enough is left over to form significant bubbling of gas that has to be dealt with separately, which CANDU reactors do by removing the gasses from the reactor and passing them over a platinum catalyst to recombine them (I'd guess that light water reactors just replace the water as it is cheaper). PMLawrence (talk) 07:55, 13 October 2015 (UTC)

External links modified
Hello fellow Wikipedians,

I have just modified 4 one external links on Aqueous homogeneous reactor. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
 * Added archive https://web.archive.org/web/20060923214448/http://www.energyfromthorium.com:80/FluidFuelReactors.html to http://www.energyfromthorium.com/FluidFuelReactors.html
 * Added archive https://web.archive.org/web/20050907151107/http://home.earthlink.net:80/~bhoglund/hRE.html to http://home.earthlink.net/~bhoglund/hRE.html
 * Added archive https://web.archive.org/web/20051024031750/http://www.kiae.ru:80/eng/inf/tex/t4.html to http://www.kiae.ru/eng/inf/tex/t4.html
 * Added archive https://web.archive.org/web/20050907090505/http://www.tpki.ru:80/Project_e/Medic/md-3.htm to http://www.tpki.ru/Project_e/Medic/md-3.htm

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at ).

Cheers.— InternetArchiveBot  (Report bug) 20:19, 16 October 2016 (UTC)