Wikipedia:WikiProject Dinosaurs/Image review/Archive September 2019 - December 2019

= Archived images in review =

Archaeornithomimus reconstruction
I've started on a reconstruction of Archaeornithomimus. There are almost no good skeletals, reconstructions, or pictures of the skeleton cast, so it's a little difficult, but I did my best. Are there any major issues before I color? Audrey.m.horn (talk) 13:48, 18 March 2019 (UTC)
 * Ornithomimids had lost the hallux, and the eye should probably be higher up, and not look towards the front (they had sideways facing eyes like modern herbivores, and probably not slit-pupils). The legs look extremely bulky, should be more like those of an ostrich, for example. FunkMonk (talk) 16:11, 18 March 2019 (UTC)
 * I'll fix those things soon. Can you explain a little more about the hallux? They weren't didactyls, were they? Audrey.m.horn (talk) 18:47, 18 March 2019 (UTC)
 * The hallux is the "dewclaw" (the short toe that doesn't touch the ground), which is also too backwards for a non-bird theropod here anyway. So instead of the four toes of most theropods (three which touched the ground), they only had three in all (except basal ornithomimisaurs, which had a hallux). So tridactyl like an emu (ostriches are didactyl). FunkMonk (talk) 18:56, 18 March 2019 (UTC)
 * I think that the arms could also use some lengthening, going by the skeletal mount. --Slate Weasel (talk | contribs) 23:00, 18 March 2019 (UTC)
 * thinned legs, removed hallux, fixed eye, lengthened arms. Anything else? Audrey.m.horn (talk) 13:47, 19 March 2019 (UTC)
 * I wonder why the eye is half covered by a sort of "brow"? That would only happen in animals with backwards projecting lacrimal or palpebral bones (such as eagles or some ornithischians). The calf/drumstick seems to be too far down in the front leg (compare with the hindmost leg). The foot claws also seem too curved, I'm pretty sure long, comparatively straightened foot claws are diagnostic for ornithomimids. FunkMonk (talk) 14:02, 19 March 2019 (UTC)
 * The length of the feathers on the legs seems to be a little inconsistent. On the near leg, they terminate at the knee, but they go a third of the way down the shin on the far leg. Could this be fixed? --Slate Weasel (talk | contribs) 00:25, 20 March 2019 (UTC)
 * fixed leg feathers+muscles, brow, and claws. Audrey.m.horn (talk) 13:40, 20 March 2019 (UTC)
 * I've colored the drawing, is there anything else that needs to be fixed before it's uploaded? Audrey.m.horn (talk) 14:06, 25 March 2019 (UTC)
 * The calf on the frontmost leg still looks oddly displaced downwards and "doubled", compare with this photo of a running ostrich: FunkMonk (talk) 14:28, 25 March 2019 (UTC)
 * fixed the calf. I'm also working on a size comparison. Audrey.m.horn (talk) 13:44, 26 March 2019 (UTC)
 * I had something slightly different in mind (the bulge is still too far down, it should be just below the knee joint), I'll try to show it later when I get home. FunkMonk (talk) 14:30, 26 March 2019 (UTC)
 * For the size comparison, the ornithomimid is too large, length is measured across the vertebral column. Currently the chart doesn't account for the curve in the neck. --Slate Weasel (talk | contribs) 15:06, 26 March 2019 (UTC)
 * I'm not too familiar with this dino but I agree with others here that the calf muscles need work. Theropods are usually restored with a bird style 'Drumbstick' which is usually concentrated on the upper 2 thirds-half of the shin bones. The lower third - half hugs the bones more closely.   Steveoc 86 (talk) 17:08, 26 March 2019 (UTC)
 * adjusted calf muscles again, those pictures were super helpful! I also edited the size diagram, it's only a small difference for a straightened neck... Audrey.m.horn (talk) 14:07, 27 March 2019 (UTC)
 * If you download this I quickly mocked up Don't take it too literally as it's simplistic and not based on any reference but it should give an idea; and obviously soft tissues can affect the shape etc. You might already do this but I'd advise that you use the layer functions and draw a reference skeleton (it doesn't have to be super detailed) which can help with maintaining proportions and helps for muscle placement etc. Steveoc 86 (talk) 15:03, 27 March 2019 (UTC)
 * Yes, I was about to mock up something similar, but Steve beat me to it. As implied by the mock up, there should not be distinct, protruding knees either, as in mammals. FunkMonk (talk) 19:44, 31 March 2019 (UTC)

Epidendrosaurus reconstruction
I know this guy looks weird but I compared everything very closely with the skeletal provided on the Scansoriopteryx page. There's a lot of mentions of speculation on a membranous component of the wing on the page, but I drew a feathered wing because there's only hypotheses, no actual proof... I can change it if anyone thinks I should. Audrey.m.horn (talk) 12:40, 4 April 2019 (UTC)
 * Looks like the hallux is on the wrong side on the left foot? FunkMonk (talk) 12:57, 4 April 2019 (UTC)
 * Wow, I didn't even realize that. Fixed! I'm going to start coloring if there's nothing else. Audrey.m.horn (talk) 13:30, 5 April 2019 (UTC)
 * Don't much much about these guys really. But it seems the primary feathers aren't attached to the second finger, as they should be, but run parallel to it? And why did you label it Epidendrosaurus instead of Scansoriopteryx, which seems to be the preferred name? FunkMonk (talk) 17:12, 7 April 2019 (UTC)
 * There's actually feather impressions on the Epidendrosaurus/Scansoriopteryx fossils that show that the feathers are attached to the third finger rather than the second finger, unlike most other maniraptorans. I labelled it Epidendrosaurus because it's based on a separate specimen that is currently known as Epidendrosaurus (it has a separate skeletal diagram on the article), but if they are the same species I can easily change the name later. Also on the article it says that Scansoriopteryx is often considered the junior synonym, but do you think I should change it? Audrey.m.horn (talk) 17:49, 7 April 2019 (UTC)
 * Colored and shaded everything. I was reading about coloration and a lot of smaller feathered dinosaurs appeared to be iridescent... so I added a little bit (similar to trumpeter birds, like it mentions in the dinosaur coloration section about Caihong). Is there anything that should be fixed before it's added to the article? Audrey.m.horn (talk) 14:08, 15 April 2019 (UTC)
 * Sadly, don't know much about these guys (as my ignorant comments above indicate), but hopefully someone else has something to say. FunkMonk (talk) 17:36, 19 April 2019 (UTC)
 * Would the purple fuzz on the chest and behind the eye be possible? I know even less about these guys though, so I may be wrong about limitations on coloration. --Slate Weasel (talk | contribs) 18:12, 19 April 2019 (UTC)
 * Certain colours would not be possible in downy "protofeathers", but it seems these one had modern-looking vaned feathers. FunkMonk (talk) 18:14, 19 April 2019 (UTC)
 * So now that we have definitive proof of a membranous wing in at least some scansoriopterygids, this illustration may need an overhaul. Fanboyphilosopher (talk) 03:44, 15 May 2019 (UTC)
 * can anyone find an image of the type specimen of Scansoriopteryx/Epidendrosaurus? I want to see what the third finger looks like in the original fossil because the membranous wings of other scansoriopterygids were supported by a similar structure that was in a different position than any finger. I just wonder if the Scansoriopteryx finger was in that position or in a more feathered-wing like position. Audrey.m.horn (talk) 21:11, 16 May 2019 (UTC)
 * I'm also unsure of this, aren't those specimens juveniles? Do we even know if they would have had those features yet? Don't know if it has ever been proposed they had them at all, they are different taxa after all, and don't seem to have those elbow spurs. FunkMonk (talk) 12:44, 17 May 2019 (UTC)
 * The holotypes of Scansoriopteryx and Epidendrosaurus are both early juveniles. Scansoriopteryx (and Epidendrosaurus, if considered separately) appears to be no closer to Yi and Ambopteryx than is Epidexipteryx, and there is no indication of a styliform element (attached to the wrist, not the elbow) or membranous wings in Epidexipteryx, which is overall much shorter-winged than the bat-winged scansoriopterygids as well. I don't think it's a good idea to depict Scansoriopteryx with Yi-like wings given available information. Ornithopsis (talk) 02:07, 20 May 2019 (UTC)
 * Here is the type specimen of Scansoriopteryx and here is the type specimen of "Epidendrosaurus". Regarding the earlier discussion of which finger the remiges attach to, it's true that there are only feathers preserved below the third finger. However, considering how poorly preserved the feathers are (they're barely visible in the photo of the actual fossil), I'm not sure that that should be taken at face value. Albertonykus (talk) 00:17, 22 May 2019 (UTC)

Giant Sauropod Size Comparison by User:KoprX
has added this size comparison to the Dinosaur size article to replace the former image (which did have some problems). It has not yet undergone review, so I have posted it here. --Slate Weasel (talk | contribs) 22:52, 23 April 2019 (UTC)


 * Sorry for not posting it here i just didnt know about existence of this page, I also made a giganotosaurus silhouette maybe it would be useful KoprX

KoprX (talk) 19:49, 26 April 2019 (UTC)KoprX
 * Well, all of the theropod silhouettes appear to be copyvio of Franoys' work, which is not allowed on Commons (Franoys' images are fully copyrighted and non-redistributable). --Slate Weasel (talk | contribs) 11:36, 26 April 2019 (UTC)


 * Yes thats true but i also made silhouettes based on images from wikipedia ( i tought i can use silhouettes from franonys since im not really using his skeletals) so i will just revert to previous wikipedia based images KoprX (talk) 18:05, 26 April 2019 (UTC)KoprX
 * Ok everything posted here is on CC BY or BY-SA, but i will try to ask Franoys for permission to do comparison based on his silhouettes KoprX (talk) 19:05, 26 April 2019 (UTC)KoprX

Mapusaurus by User:KoprX
I made an restoration for this beast could this be used as an ilustration?
 * I would suggest removing the elaborate spines, we don't know of them from any theropod, and they probably count as too speculative to be acceptable as integument. I'm on the fence about the throat flap, it's not too unlikely but also I'm not sure how it'll look artistically without the spines present. IJReid { {T - C - D - R} } 14:46, 26 April 2019 (UTC)
 * The throat flap is probably ok (similar pouches seem to be known in other dinosaurs), but some of those spines are really long and thick, a bit misleading, almost like an osteological structure. FunkMonk (talk) 14:47, 26 April 2019 (UTC)
 * Spikes removedKoprX (talk) 18:19, 26 April 2019 (UTC)KoprX
 * It looks a bit emaciated in addition. Sunken fenestrae in the face, and the tail seems flat rather than round in cross section, due to the shading. Otherwise fine, I'd say. Good that someone finally remembers to draw squared off lower jaws in a carcharodontosaur. FunkMonk (talk) 19:06, 26 April 2019 (UTC)
 * Thats true this sunken fenestrae made it look emaciated, but im afraid i cant do anything with the tail so i will just left it as it is.KoprX (talk) 19:39, 26 April 2019 (UTC)KoprX

Dinosaur Size Comparison by User:KoprX
That would be final version of size comparisons, using only images from wikipediaKoprX (talk) 15:40, 27 April 2019 (UTC)KoprX
 * You need to credit the authors of the original illustrations if they weren't public domain, and provide sources for the size estimates. Also, I plan to update my carcharodontosaurids some time next month, which will include minor updates to Carcharodontosaurus and major overhauls for Giganotosaurus, just to let you know. --Slate Weasel (talk | contribs) 21:29, 28 April 2019 (UTC)
 * Thanks for advice, sources and credits addedKoprX (talk) 10:35, 29 April 2019 (UTC)KoprX
 * Charts remade into .svg any thoughts?KoprX (talk) 14:18, 22 May 2019 (UTC)KoprX
 * In Theropods comparison should i use better described Giganotosaurus holotype or MUCPv-95 wich may be bigger but it's real size is uncertain?KoprX (talk) 14:15, 23 May 2019 (UTC)KoprX
 * Use the biggest we have good size estimates for. As long as the sources for the size are reliable we can justify using a less complete specimen. IJReid { {T - C - D - R} } 15:04, 23 May 2019 (UTC)
 * The Trike's foot that's partially off the ground seems like it could use some more padding. --Slate Weasel (talk | contribs) 16:20, 25 May 2019 (UTC)
 * Fixed, Im also posting remakes of your's Carcharodontosaurus and Giganotosaurus (on public domain ofc) maybe someone will find it usefull. KoprX (talk) 20:21, 25 May 2019 (UTC)KoprX

Burianosaurus Skeletal Diagram
I had something else planned for April, but I lost about nine days of time to work on it, so I produced a dinosaur known from one femur instead. First ornithischian I've ever done though! Any comments? (The scale bar in the paper apparently was off) --Slate Weasel (talk | contribs) 21:52, 27 April 2019 (UTC)
 * It looks alright, but I think the text is so large and overpowering the entire image ends up feeling cramped. And I think the head looks too much like a derived rhabdodont for what is a basal ornithopod. IJReid { {T - C - D - R} } 00:07, 28 April 2019 (UTC)
 * Would Camptosaurus be a better model for the skull? It is more derived, but the rounder shape is more like that of more basal ornithopods. --Slate Weasel (talk | contribs) 00:32, 28 April 2019 (UTC)
 * Camptosaurus or Dryosaurus would probably work. Or Hypsilophodon, which is probably a couple branches more basal. IJReid { {T - C - D - R} } 03:18, 28 April 2019 (UTC)
 * I used a slightly truncated and sloped Camptosaurus head to be more general. Is this better? --Slate Weasel (talk | contribs) 11:28, 28 April 2019 (UTC)
 * Yeah. Now maybe move the text higher up to fill some of the whitespace and also leave the silhouette with more room? IJReid { {T - C - D - R} } 15:01, 28 April 2019 (UTC)
 * Done! --Slate Weasel (talk | contribs) 21:26, 28 April 2019 (UTC)
 * Shouldn't it have five fingers? Also, I think it would look better if the scale bar were not that thick and the "1 m" so tightly attached to it. --Jens Lallensack (talk) 22:04, 28 April 2019 (UTC)
 * It does have 5 fingers, IV & V are just really close together (I can change this if this is undesirable). I definitely can fix the scale bar. --Slate Weasel (talk | contribs) 22:14, 28 April 2019 (UTC)

Saurornithoides restoration
speculative crest based on the ornate hawk-eagle. any major issues? Audrey.m.horn (talk) 13:33, 3 May 2019 (UTC)
 * colored and shaded! i'll make a size comparison chart also. Audrey.m.horn (talk) 14:17, 7 May 2019 (UTC)
 * size comparison finished. it's kind of iffy because there's not really any information given on the article about size except for the skull length, so I went off of that... Audrey.m.horn (talk) 14:04, 9 May 2019 (UTC)
 * Ah damn can't believe I didn't notice til now but I think the feet both need some more of a soft tissue foot pad. IJReid { {T - C - D - R} } 14:52, 9 May 2019 (UTC)
 * fixed. Audrey.m.horn (talk) 13:39, 10 May 2019 (UTC)

Some new art
Since I've taken up digital recently, I might as well submit the art I've done here. Remake of my old Foraminacephale and a brand new Pampadromaeus are up first (as well as Shantungosaurus above), more will probably follow, some may not be dinosaurs in a sense but I'll add them here just for the sake of a centralized discussion. IJReid { {T - C - D - R} } 00:03, 6 May 2019 (UTC)
 * The legs seem rather stiff and hyperextended in the Pampadromaeus? Especially the one that steps forwards.FunkMonk (talk) 05:55, 13 May 2019 (UTC)
 * Legs fixed, and feet fixed per edit summary of removal from page. IJReid { {T - C - D - R} } 02:28, 18 May 2019 (UTC)

Ouranosaurus nigeriensis restoration
how does this look? question: do we need brand new restorations of all those hadrosaurs that are messed up, or are we just editing the existing images? Audrey.m.horn (talk) 13:46, 10 May 2019 (UTC)
 * We will almost certainly need new restoration of those that fall into the "major issues" group. IJReid { {T - C - D - R} } 14:56, 10 May 2019 (UTC)
 * The severity of the issues listed there are often exaggerated or inaccurate, so we should wait until we have independently evaluated all the images before we replace them or remove them. As for this drawing, remember to keep the nostril at the very front of the nostril. The hind claws look very sharp, they would be more blunt in hadrosaurs. The thumb should also be more of a robust spike, looks pretty frail now. FunkMonk (talk) 05:53, 13 May 2019 (UTC)
 * Your claims that they are inaccurate are what's exaggerated and incorrect. I'll give you the point on the stance of the foot but everything else you claimed is fine is most certainly not.  Luso titan  (Talk | Contributions) 20:51, 13 May 2019 (UTC)
 * All I'm saying is that we should evaluate them on a case by case basis. Better than throwing the baby out with the bathwater. FunkMonk (talk) 10:09, 15 May 2019 (UTC)
 * fixed nostril and claws. Audrey.m.horn (talk) 14:02, 13 May 2019 (UTC)
 * colored! Audrey.m.horn (talk) 13:53, 16 May 2019 (UTC)

Spinosaurus size comparison
I've done Spinosaurus size comparison, any suggestions or comments?KoprX (talk) 15:53, 12 May 2019 (UTC)KoprX
 * I think it looks fine. IJReid { {T - C - D - R} } 14:47, 15 May 2019 (UTC)
 * I think the juvenile needs editing somewhat? To my knowledge, young Spinosaurus would have had a greatly reduced, if not entirely absent sail, which would have grown larger as they aged ^-^ --TKWTH (talk) 12:21, 17 May 2019 (UTC)
 * Can you provide sources for that? Authors of juvenile spinosaurus articles reconstruct them with sail present, although it may be entirely speculetive becouse no sail remains have been found in juvenile specimens. Dont get me wrong I also find it unlikely that they hatched with that proportionally big sail but i dont know of any evidence of it. KoprX (talk) 15:17, 17 May 2019 (UTC)KoprX
 * No sources exist, there is nothing but speculation regarding juvenile Spinosaurus sails, and nothing at all in citable literature.  Luso titan  (Talk | Contributions) 02:20, 20 May 2019 (UTC)
 * Agreed. Without a source justifying a smaller sail in juveniles, there is no need to change it. Ornithopsis (talk) 06:44, 20 May 2019 (UTC)

the heck an MS PAINT 3d guy? No, I was asked not to use 3d paint so i stopped so how is it fair that you do the same? It does not make sense, use the normal guy--Bubblesorg (talk) 04:14, 16 May 2019 (UTC)
 * Whats exacly wrong with usage of a 3d rendered MS PAINT man silhouette, do i violate MS copyright by that? I don't think so, but if I do i will just change it. No one who saw my comparisons indicated this as an issue. I think it's a different case with your restoration made in paint.KoprX (talk) 10:52, 16 May 2019 (UTC)KoprX
 * I also think that you were asked not to use paint not becouse it's something wrong with this program itself, but your restorations are not accurate enough.KoprX (talk) 10:59, 16 May 2019 (UTC)KoprX
 * Sorry for the late comment, but this actually is an issue. The MS Paint human is not freely licensed, as far as I understand, and therefore needs to be replaced with a free silhouette. --Slate Weasel (talk | contribs) 22:52, 16 May 2019 (UTC)
 * Corrected in all comparisonsKoprX (talk) 15:18, 17 May 2019 (UTC)KoprX

Remade into .svg any thoughts?KoprX (talk) 17:22, 22 May 2019 (UTC)KoprX

Buriolestes schultzi restoration
issues? the skeletal diagram from the article was closely referenced so I know the tail looks long but I checked the length pretty carefully. Audrey.m.horn (talk) 14:02, 13 May 2019 (UTC)
 * The fourth finger looks huge, the fourth and fifth would usually be the smallest, vestigial fingers. The legs seem very chubby, a small animal like that would likely have more slender legs (the thighs and calves are almost lumped together here, with little definition). Compare with the skeletal: FunkMonk (talk) 14:06, 13 May 2019 (UTC)
 * thinned legs/fixed calves, and shortened fingers. Audrey.m.horn (talk) 14:16, 13 May 2019 (UTC)
 * There are a few significant things I believe should be fixed. The back should be almost flat, like in the skeletal, instead of having a hump in the middle. The skull shape is wrong, the mandible is too short, the snout shouldn't be concave, and the proportions seem incorrect. And the feet as a bit wonky, there is a weird lump behind the ankle that shouldn't be there, the foot pads are too varying in shape (should be almost flat with minor indents at digit joints), and the foot pads looks a bit too small. Otherwise tho its a good piece. IJReid { {T - C - D - R} } 23:31, 13 May 2019 (UTC)
 * ok, fixed those things! Audrey.m.horn (talk) 13:54, 14 May 2019 (UTC)
 * I noticed a few more things, the snout is too low, should be taller, the elbow has a weird line it shouldn't have, and the thigh is too long, the calves should be higher up the leg, and the ankle has a weird line that should be removed. I drew the changes out roughly here IJReid { {T - C - D - R} } 15:14, 14 May 2019 (UTC)
 * I fixed the legs and elbow. I left the snout as is because I overlaid the skeletal diagram and it's pretty much exactly that shape... Audrey.m.horn (talk) 13:40, 15 May 2019 (UTC)
 * Alright I think the lineart is good now. IJReid { {T - C - D - R} } 14:46, 15 May 2019 (UTC)
 * I think that the upper arm could a bit more prominent. --Slate Weasel (talk | contribs) 11:56, 19 May 2019 (UTC)
 * colored. I also fixed the upper arm. Audrey.m.horn (talk) 13:39, 21 May 2019 (UTC)
 * also created a size comparison. Audrey.m.horn (talk) 14:19, 21 May 2019 (UTC)
 * I think it looks good. IJReid { {T - C - D - R} } 03:50, 23 May 2019 (UTC)

Suskityrannus
https://commons.wikimedia.org/wiki/, while i may try to draw a better better image later, right now for the time being is this image ok? The teeth are a bit wonky but other than the teeth is there anything wrong about it?. My references are, ,  and partly inspired from this .--Bubblesorg (talk) 00:50, 16 May 2019 (UTC) just in case the link does not work--Bubblesorg (talk) 00:51, 16 May 2019 (UTC)
 * It has a bunch of anatomical issues, but first of all, why is there so much empty space? FunkMonk (talk) 00:57, 16 May 2019 (UTC)

I will crop that, but tell me what are they so i can fix them?--Bubblesorg (talk) 02:05, 16 May 2019 (UTC)
 * Well, if you compare with the published reconstruction, the teeth don't match at all. The eye also seems to be three times too big to fit within the sclerotic ring, and you have a big hole at the back of the head which should be covered by jaw musculature. FunkMonk (talk) 06:19, 16 May 2019 (UTC)

sure I will revise.--Bubblesorg (talk) 15:05, 16 May 2019 (UTC)
 * On the subject of Suskityrannus, Bubblesorg's added this image to the Description section. It appears to be somewhat rough and the positioning of the skulls is confusing (it looks like Suskityrannus is just an extension of Tyrannosaurus' jaw). Any comments on this image? --Slate Weasel (talk | contribs) 16:35, 25 May 2019 (UTC)
 * Agreed on the positioning note; I don't think the skulls should be overlapping. Additionally, the image should be clearer on whether they're restored to the same length or to scale; I'm not even sure if they are restored to the same length and they're certainly not to scale. Ornithopsis (talk) 17:46, 25 May 2019 (UTC)
 * I find the image near about impossible to interpret in a useful fashion at full size, nevermind thumbnail. I would definitely advise removing it from the page.  Luso titan  (Talk | Contributions) 00:03, 26 May 2019 (UTC)
 * The image could be saved by simply moving the skulls away from each other, why they overlap in the first place is baffling. By the way, by coincidence, the Timurlengia restoration now used in the Suskityrannus article is quite similar to the Suskityrannus press release artwork. FunkMonk (talk) 22:50, 26 May 2019 (UTC)

so like this?--Bubblesorg (talk) 04:10, 27 May 2019 (UTC)
 * I think the image is a bit too dark currently, a white background and brighter skulls would be an improvement. IJReid { {T - C - D - R} } 04:15, 27 May 2019 (UTC)

okay fixed--Bubblesorg (talk) 15:04, 27 May 2019 (UTC) oh so like this then?--Bubblesorg (talk) 14:53, 28 May 2019 (UTC)
 * What is the point of having the Tyrannosaurus skull there in the first place? The Suskityrannus one is so small that you cannot really compare something. Could you maybe make a version with just the Suskityrannus skull in high resolution? --Jens Lallensack (talk) 15:23, 27 May 2019 (UTC)
 * did this image actually get approved? because it's on the article and I thought we decided not to use the one of both Tyrannosaurus and Suskityrannus. I'm going to remove it unless anyone thinks otherwise. Audrey.m.horn (talk) 15:54, 1 June 2019 (UTC)
 * Assuming the model is actually CC-BY 4.0 (I haven't checked if the guy who made it even owns it) I think the image of just the Suskityrannus skull is fine for inclusion in the article, I cropped out the label and size (incorrect as well as OR). IJReid { {T - C - D - R} } 19:52, 1 June 2019 (UTC)

Tyrannosaurus scale chart
I'm planning to remake this, but it seems rather pointless to me to have 2 almost same size specimens in this chart. My question is what specimens should i depict maybe it will be fine to show just 3 specimens holotype, Sue and Jane?KoprX (talk) 13:42, 28 May 2019 (UTC)KoprX
 * Why is it pointless? It is the two most famous specimens. FunkMonk (talk) 13:43, 28 May 2019 (UTC)
 * The difference between them(AMNH 5027 and BHI3033) is about 10 cm in length and they are almost exactly same high(chart above is incorrect) and since there are many famous specimens maybe i should pick different one?KoprX (talk) 13:51, 28 May 2019 (UTC)KoprX
 * Ok that's the first draft ant thoughts?KoprX (talk) 14:37, 28 May 2019 (UTC)KoprX

Procompsognathus
Though this genus is somewhat famous, it has never had a proper restoration here (apart from some weird model which is not used in the article anymore). Here is a sketch with some early colouring, any thoughts? FunkMonk (talk) 08:39, 19 June 2019 (UTC)
 * Looks great, very dynamical. We should consider making a GA out of the article at some point. Possible issues: Maybe the outer toe is too short, should be a bit longer than the inner one (appears to be the opposite in the drawing, but might be perspective). See diagram in Romano & Citton 2016. Also, the tibia looks a bit short compared to the metatarsus, when I compare with the holotype skeleton? Again, might be perspective. The left forearm appears to be much shorter than the right one, or is it again perspective as the left arm is angled outward? On what did you base the manus on? In Coelophysis and Megapnosaurus, at least, the fourth digit is almost as long as the third, while the second is much shorter with a much larger claw. At least in the left hand it looks like the fourth digit is much shorter than the third. --Jens Lallensack (talk) 07:26, 22 June 2019 (UTC)
 * Thanks, I'll fix this soon! I was looking at the second diagram here for reference, and the Coelophysis taxobox image for other details. Looking again, it seems the first diagram might actually be more accurate? I can't really deduct from that website why they're so different or what they represent... FunkMonk (talk) 12:30, 22 June 2019 (UTC)
 * Hmm I personally would not trust that webpage in any case, can't even see who the author is or what his sources are. The hand of Coelophysis was also very slender, and the digits were apparently not widely diverging, see . --Jens Lallensack (talk) 14:22, 22 June 2019 (UTC)
 * Did some changes, any thoughts, ? FunkMonk (talk) 11:44, 26 June 2019 (UTC)
 * Looks very good now! --Jens Lallensack (talk) 21:21, 27 June 2019 (UTC)
 * Cool! I'll see if anyone else has something to say before I add it. FunkMonk (talk) 22:38, 27 June 2019 (UTC)

May I use this
Hadrosaurus has no restoration, which is stuck up in my head. I created these using several different restorations --Bubblesorg (talk) 02:46, 22 June 2019 (UTC)
 * There is no known skull preserved for Hadrosaurus, so there is no value in having a reconstruction consisting exclusively of the head (as no part of this reconstruction is based on anything known from Hadrosaurus). A full-body reconstruction would be more valuable. Ornithopsis (talk) 02:49, 22 June 2019 (UTC)
 * I've actually been working on a full-body drawing, so hopefully I can get it up here soon for review! Audrey.m.horn (talk) 03:39, 13 July 2019 (UTC)

I know, its a speculative restoration based on a couple different genera as well as the fossils we do have of the neck (according to the PBDB there is a neck.)--Bubblesorg (talk) 04:16, 22 June 2019 (UTC) So may I use this then? I am renaming if speculative restoration of hadrosaurus--Bubblesorg (talk) 04:19, 22 June 2019 (UTC)
 * Actually, we have a few tiny maxillary fragments and a handful of teeth (but no neck), however, I still am very dubious of giving this dinosaur a "bust" reconstruction. Since hadrosaur skulls are very distinctive, it seems unwise to reconstruct the whole head (unless it was ONLY known from those fossils, which it isn't), especially considering that Hadrosaurus' phylogenetic position is poorly understood, and it is sometimes placed in its own group without any close relatives. Like Ornithopsis said, this animal really needs a full body restoration to really show its characteristics. Additionally, this restoration already has a few issues. The eye's location in the skull does not seem to account for the fact that the skull is angled downwards, the back of the skull is missing jaw muscles and an ear, and the whole image just needs more detail. --Slate Weasel (talk | contribs) 11:32, 22 June 2019 (UTC)
 * It turns out that Hadrosaurus does actually preserve 3 cervicals. The paper didn't include some material. But it still doesn't seem like a wise idea to do a "bust" restoration for a hadrosaur known from two small maxillary fragments and teeth in that region. --Slate Weasel (talk | contribs) 00:40, 30 June 2019 (UTC)

Argentinosaurus Update
I noticed that randomdinos updated his Patagotitan skeletal to include more intervertebral cartilage, so I followed this to update my Argentinosaurus. I also fixed the lines on the bones following Hartman:. I can't seem to get the text to work anymore, though. Can anyone help with this? Any comments on the image itself? --Slate Weasel (talk | contribs) 12:06, 22 June 2019 (UTC)
 * Just had a quick look; you may can bake the manus more rounded, they look too rectangular to me. Regarding the text – how can we help you, where did you get stuck? --Jens Lallensack (talk) 14:24, 22 June 2019 (UTC)
 * I tried to do something with the text but i don't know what was exactly wrong. I also changed neck and tail based on https://commons.wikimedia.org/wiki/File:Patagotitan-Scale-Diagram-Steveoc86.svgKoprX (talk) 14:52, 22 June 2019 (UTC)KoprX
 * Well, you seem to have fixed it! (Sorry for the vague comment above - the text was not aligning properly before.) I constricted the manus a bit and added a rounder edge to the bottom of the lifted one. I also changed the position of the neck a bit, as it was a bit too similar to Steve's Patagotitan before (CC BY-SA isn't reversely compatible with PD). It's now about 34 m long. --Slate Weasel (talk | contribs) 15:40, 22 June 2019 (UTC)
 * Another thing: Is the sauropod standing or moving? Hind limbs do not fit with forelimbs, the forelimb that swings forward appears to make a much longer stride than the hindlimbs did. Stride lengths should be identical. --Jens Lallensack (talk) 15:47, 22 June 2019 (UTC)
 * Does this look better? --Slate Weasel (talk | contribs) 15:58, 22 June 2019 (UTC)
 * It does, thanks. --Jens Lallensack (talk) 16:20, 22 June 2019 (UTC)

John Conway's paleoart & skeletal reconstructions

 * I actually think the Carnotaurus hand is exactly what we want, because it is the flesh "mitten" with the singular pollex, like the most recent published interpretations. Atuchin's artwork is fantastic I'm surprised we have any of it. IJReid { {T - C - D - R} } 00:20, 30 June 2019 (UTC)
 * They seem to be older works (2011/2014), so maybe he has no commercial use for them anymore. FunkMonk (talk) 17:05, 30 June 2019 (UTC)
 * Burch and Carrano (2012) reinterpreted the supposed metacarpal IV spike of Carnotaurus as one of the manual unguals (either II or III), in which case the common "single spike on the side" depiction of Carnotaurus hands is probably not correct. I'm not aware of any newer studies that have questioned Burch and Carrano's interpretation, though I'm also not especially familiar with the literature on this group of theropods. Albertonykus (talk) 16:38, 10 July 2019 (UTC)

Australodocus Skeletal
I have created this skeletal diagram of Australodocus. The silhouette's based on Euhelopus, with some modifications to skull, neck, tail, and foot length to make it appear more generic. I have a version using a Supersaurus (bad taxonomic things seem to be in store for Supersaurus, if you haven't been reading SV-POW, by the way) silhouette instead if that's preferred. Any input on this? --Slate Weasel (talk | contribs) 21:05, 30 June 2019 (UTC)
 * This looks fine to me. Australodocus does appear to be a basal titanosauriform of some kind, most likely a euhelopodid. The putative relationship with Supersaurus was based on a heavily diplodocid-focused analysis with no euhelopodid taxa included for comparison, and Tschopp et al. acknowledge that their support for it as a diplodocid is weak. As for the validity of Supersaurus, I wouldn't be too concerned about the validity of Supersaurus just yet—Taylor acknowledges that he isn't familiar enough with appendicular anatomy to evaluate whether Supersaurus has a diagnostic scapula, the Jimbo specimen still exists, and none of this is peer-reviewed anyway. Ornithopsis (talk) 05:55, 1 July 2019 (UTC)

Cetiosauriscus Composite skeletal


To fill in the gaps, I used close relatives such as Mammenchisaurs, as well as basal Eusauropods. If adding a human scale figure would better help illustrate the size I will add one. Eotyrannu5 (talk) 10:47, 9 July 2019 (UTC)
 * I think the skeletal looks good, a human is fine with or without I have no preference in skeletals. IJReid { {T - C - D - R} } 16:08, 10 July 2019 (UTC)

Various Dinosaur models & statues from the National Museum of Brazil
Any thoughts on these models? The only problems I see are the visible holes & fenestrae, whatever's going on with Skorpiovenator & possibly the lack of lips. The identity of the quadrupedal Archosaur is also a conundrum, but I think it might be a a silesaurid. I will remove it from here if it is, but I need a few more opinions on the matter. For all I know, it could be a sauropodomorph of some kind. (There are also more photos of these models at different angles over at Wikimedia) Monsieur X (talk) 13:21, 14 July 2019 (UTC)
 * Visible fenestrae and scaly maniraptorans is always a problem. But I think the abelisaur and Allosaurus models are pretty good. As for that last one, I have also been looking for clues, I thought it could maybe be the silesaurid Sacisaurus from Brazil, but found no confirmation. Also, some of the other animals are not from Brazil, so we should not necessarily assume it is either. These models were also discussed here, by the way: FunkMonk (talk) 13:45, 14 July 2019 (UTC)
 * If you look closer, Deinonychus is actually feathered. As for the others, I do agree that the Allosaurus & Pycnonemosaurus look fine, with the exception of Skorpiovenator, something's not right with the how it's head & neck are positioned for me. As for the quadrupedal Archosaur, I found another image with statue, maybe it's a full-size (or close enough) replica of the animal? Monsieur X (talk) 16:16, 14 July 2019 (UTC)
 * I guess the only way we can find out is by emailing the artist... FunkMonk (talk) 21:42, 17 July 2019 (UTC)

Timimus Skeletal Diagram
I've created a skeletal reconstruction of Timimus hermani. I used Suskityrannus for the silhouette as it falls outside of Xiongguanlong + Tyrannosauridae. I de-crushed the femur using other basal tyrannosaurs as guides. How does it look? --Slate Weasel (talk | contribs) 14:21, 31 July 2019 (UTC)

Hadrosaurus foulkii restoration
as promised. a full-body restoration of Hadrosaurus foulkii based on as much fossil evidence as i could find and the theoretical skull model in the Academy of Natural Sciences' skeleton mount (shown in the article). changes? Audrey.m.horn (talk) 15:15, 31 July 2019 (UTC)
 * Immediate impression is that it's much too slender, with theropod-like legs. Metatarsus should be shorter and wider and the pedal unguals should be more hoof-like. I, personally, would use Eotrachodon as a model for the head. Ornithopsis (talk) 15:35, 31 July 2019 (UTC)
 * ok, thickened body/back legs and fixed those claws. the Eotrachodon head is very similar to the Hadrosaurus reconstruction i cited earlier, so i didn't really change it (unless there's something major that should be fixed). Audrey.m.horn (talk) 17:43, 31 July 2019 (UTC)
 * The toes still look like they need more padding. --Slate Weasel (talk | contribs) 18:27, 31 July 2019 (UTC)
 * done Audrey.m.horn (talk) 18:38, 31 July 2019 (UTC)
 * colored and shaded. Audrey.m.horn (talk) 22:14, 31 July 2019 (UTC)
 * I think that the toes on the right foot still need more padding. Also, the thigh's musculature looks very mammalian in shape, with a prominent rounded bulge on its anterior side (here's Scott Hartman's dinosaur muscle diagram: ). I'm not much of a hadrosaur expert, but maybe or  have more to say (both have done major expansions hadrosaur articles here). --Slate Weasel (talk | contribs) 23:11, 31 July 2019 (UTC)
 * My first thought is that that neck needs more meat on it, more like what Leonardo shows. I'd give it some more beak tissue, too.  Luso titan  (Talk | Contributions) 23:36, 31 July 2019 (UTC)


 * One thing that could maybe be conveyed better by shading is that the palms of hadrosaurids were concave (see fig. 6 here:). FunkMonk (talk) 01:06, 1 August 2019 (UTC)
 * ok, made those changes: fixed thigh muscles, toe padding, thicker neck, fleshed out beak, made palms more concave. Audrey.m.horn (talk) 02:16, 1 August 2019 (UTC)
 * I believe the toes on the right foot are too long still. Left foot looks okay tho IJReid { {T - C - D - R} } 18:56, 5 August 2019 (UTC)
 * fixed Audrey.m.horn (talk) 19:06, 5 August 2019 (UTC)

Triceratops Size Comparison
I've recently been asked by to make a Triceratops size comparison showing the largest specimens for each species. So far I've found these skull diagrams by GetAwayTrike showing four particularily large specimens of Triceratops:. I'm not sure how accurate it is, though, and would like to get more input on what specimens to include. --Slate Weasel (talk | contribs) 18:34, 3 August 2019 (UTC)
 * The article lists MWC 7584 as the largest Trike skull, but I can't find any source that assigns it to a particular species. It is listed as T. prorsus in the current Trike skeletal, but that doesn't cite any sources. Does anyone know which species this skull belongs to? --Slate Weasel (talk | contribs) 18:34, 7 August 2019 (UTC)
 * Please check this discussion in the Certaopsian group at Facebook. According to Christopher Collinson: " https://doi.org/10.1073/pnas.1313334111 places MWC 7584 as T. prorsus based on stratigraphic data." It is worth checking it periodically, as new answers and info may arise there.  M ath K night  20:14, 9 August 2019 (UTC)
 * Hi . According to the link above MWC 7584 is a Triceratops prorsus. You can follow the discussion there if more questions and info are needed.  M ath K night  19:02, 30 August 2019 (UTC)
 * Sorry for the very long delay, . I already have silhouettes for both species, and T. prorsus has been scaled to MWC 7584, it's about the same size as "T. maximus". The only information I'm missing is the biggest T. horridus specimen's number and size. --Slate Weasel (talk | contribs) 21:57, 2 September 2019 (UTC)


 * By the way, I could also include "T. maximus" in the chart if desired (it's not known from a skull (granted, a big Trike skull is apparently sometimes claimed to be "T. maximus", but I see little proof of that assignment - in fact, I'm wondering if this skull actually is MWC 7584), but Bakker did popularize it). --Slate Weasel (talk | contribs) 21:56, 2 September 2019 (UTC)
 * More searching through the DML archives shows that this was indeed never catalogued as "T. maximus", and instead is either T. prorsus/T. horridus (no distinction made at time). Speaking of the DML, I found this post that listed "Ugrosaurus" as a synonym of T. horridus. I will probably scale T. horridus with this specimen. --Slate Weasel (talk | contribs) 20:59, 8 September 2019 (UTC)


 * I have finished it, . Sorry for the extremely long delay. --Slate Weasel (talk | contribs) 12:04, 18 September 2019 (UTC)
 * Thanks! It looks very nice. I will put it in the relevant articles.  M ath K night  09:36, 30 September 2019 (UTC)

Maniraptoran Size Comparisons
Size comparisons of two maniraptorans. Zanabazar junior and perhaps Rahonavis are likely to follow. How accurate are the above two (I haven't done a whole lot of feathered theropods yet, so I'm not sure how well the feathering on these guys turned out)? --Slate Weasel (talk | contribs) 15:05, 6 August 2019 (UTC)
 * Look good, but since Hagryphus is only known from the hand, I'd show it free of the silhouette (by rotating the arm forwards), now it kind of disappears within the body. FunkMonk (talk) 14:05, 7 August 2019 (UTC)
 * Is this pose better? --Slate Weasel (talk | contribs) 15:07, 7 August 2019 (UTC)
 * Yeah! FunkMonk (talk) 15:09, 7 August 2019 (UTC)


 * Zanabazar has arrived, and it's bigger than I expected. Comments? --Slate Weasel (talk | contribs) 18:31, 7 August 2019 (UTC)
 * The snout of Zanabazar looks too long and thin IMO, it should be more robust if you follow Headden's skull (instead of just his skeletal). IJReid { {T - C - D - R} } 21:35, 10 August 2019 (UTC)
 * I've updated the skull shape, although it seems like the skull's much bigger than the ~27 cm figure given in the article, so I probably should resize the entire silhouette. --Slate Weasel (talk | contribs) 13:58, 19 August 2019 (UTC)


 * I scaled Zanabazar to the correct skull size. Comments? --Slate Weasel (talk | contribs) 20:39, 8 September 2019 (UTC)

Request: Ambopteryx illustration
The article on Ambopteryx does not have any illustrations and I can't find any images related to it that are licensed under Creative Commons so I would like to request an illustration of it. The articles on all of the other scansoriopterygids have at least one life illustration.
 * i'll get on that! thanks! Audrey.m.horn (talk) 13:52, 7 August 2019 (UTC)

Awesome! Looking forward to your interpretation. Achat1999 (talk) 14:10, 8 August 2019 (UTC)

Aeolosauridae Size Comparisons
Here are three aeolosaurids, which will soon (hopefully) be accompanied by a few more. Pinging, the author of the Aeolosaurus skeletal I referenced, for input. Comments? (Also, does anyone know how to fix the Argentoconodon entry on Wikidata? Currently the image there is inaccurate, and it doesn't seem to want to let me remove it.) --Slate Weasel (talk | contribs) 15:29, 13 August 2019 (UTC)
 * Just popping in to say that the Argentoconodon image should be taken care of, sorry to say I don't have much input on the diagrams though DrawingDinosaurs (talk | contribs) 05:26, 15 August 2019 (UTC)
 * Obviously, I don't have any serious criticisms, since it's based on my skeletal. The way you've oriented the tail—i.e., angled down at the base but otherwise curving uniformly upward—doesn't look quite right to me, though. The curvature of mine is based partly on Scott Hartman's Malawisaurus skeletal and partly on the fact that the anterior caudals of Aeolosaurus appear to me to articulate in a tight curve. If I were to revise this skeletal I'd probably make the tail angle slightly upward at the base as in many of Scott Hartman's titanosaurs to counteract the apparent curvature of the anterior caudal sequence, but I'm not sure and would welcome any critique on my reconstruction of its tail. Unfortunately, overall a lot of aspects of titanosaur anatomy are contingent on poorly-understood issues of their phylogeny, so it's hard to say how accurate these are overall. They look fine to me, although FWIW Rinconsaurus may be more closely related to lognkosaurs and Bonitasaura than to aeolosaurs. Ornithopsis (talk) 01:37, 17 August 2019 (UTC)
 * Does this look better for Aeolosaurus? As for Rinconsaurus, we're fortunate to have the majority of almost every body part, so its appearance shouldn't change too much (unless, of course, the paper got the shape of its bones extremely wrong, which I've seen happen before). I do find the confusion over whether or not a clade that would be Aeolosaurus + Rinconsaurus <- Mendozasaurus, Saltasaurus, etc. actually exists to be quite intriguing. --Slate Weasel (talk | contribs) 14:04, 19 August 2019 (UTC)
 * A few years back I attempted to test the Rinconsaurus skeletal with the published bone photos and measurements and it didn't fair well. That said, the paper says it's known from three individuals, two adults and one juvenile, and because so little is illustrated it's difficult to know for certain how best to scale everything together. When I updated my restoration, I used a combination of scaled in photographs, the original skeletal and other titanosaur reconstructions. The scale bar for one of the cervicals didn't correctly correspond to the published measurement and I was unsure which to trust. Either way, I suspect the published skeletal gave it a short neck because of what other titanosaur restorations were doing at the time. It might have been inspired by Hallett's Rapetosaurus skeletal. Steveoc 86 (talk) 13:15, 20 August 2019 (UTC)
 * Given the quality of the description of Rinconsaurus and the difficulty of cross-scaling the material, I agree that it's difficult to accurately figure out the proportions of Rinconsaurus. For what it's worth, though, Pitekunsaurus may be a rinconsaur (see fig. 41 of the description of Wamweracaudia for example) and it preserves a braincase, cervicals, dorsals, caudals, and limb elements of a single individual. It could serve as a "reality check" on the proportions of Rinconsaurus. The updated Aeolosaurus looks better to me. Ornithopsis (talk) 21:44, 20 August 2019 (UTC)
 * I don't have access to the Wamweracaudia paper, but looking at the description of Pitekunsaurus, Fig. 5, much longer cervicals are plainly evident, suggesting a longer neck like what's seen in Overosaurus. I'll update it soon. And yes, the Rapetosaurus skeletal in the original description is quite strange. --Slate Weasel (talk | contribs) 22:08, 20 August 2019 (UTC)
 * I've done it. --Slate Weasel (talk | contribs) 20:27, 8 September 2019 (UTC)

Spinosauridae size comparison
The current Spinosaurid chart has a number of scaling issues (a number of the taxa are too large / too small), and I wanted to include the recently discovered Vallibonavenatrix in a chart as well. All specimen catalogue numbers are listed in the Description. Eotyrannu5 (talk) 10:19, 27 August 2019 (UTC)
 * This is so good! Just one thing that seems to come up a lot, the weird, notched, kinda malformed shape of Ichthyovenator's sail is almost definitely a pathology. If you look at photos of the material from a non-lateral view, they're wiggling all over the place. Only issue I have, though ^-^ --TKWTH (talk) 17:27, 27 August 2019 (UTC)
 * I don't think the sail is entirely pathological or taphonomic distortion, and it is only definitively present in the anteriormost of the holotype dorsals, while the remainder form a single contiguous round shape for the sacral spines. We don't have enough data to make a decision either way. IJReid { {T - C - D - R} } 18:55, 27 August 2019 (UTC)


 * Why does one of them only show one leg when the rest show two? Not a big deal, but a bit jarring. FunkMonk (talk) 18:59, 27 August 2019 (UTC)
 * The Spinosaurus silhouette looks extremely similar in pose to Franoys' skeletal (which is copyrighted). It probably should be reposed. --Slate Weasel (talk | contribs) 21:16, 27 August 2019 (UTC)
 * The Spinosaurus silhouette's pose is not at all traced from Franoys'. With small legs, it's hard to make any other pose that wouldn't look awkward. Also, edited the Ichthyovenator, with another leg Eotyrannu5 (talk) 22:13, 27 August 2019 (UTC)
 * I'm the creator of the previous chart, and this looks quite nice! I gotta agree I wasn't sure about the scaling for the some of the animals in my chart, and this seems more proper. The only thing I'd suggest is adding references for the size estimates in the file description (as the chart will be present on Baryonyx and Irritator, which are Featured Articles and thus asked for sources during the image review). ▼PσlєοGєєк  ƧɊƲΔƦΣƉ▼  00:10, 31 August 2019 (UTC)
 * I've done some searching and haven't come across a size estimate for Vallibonavenatrix from a reliable source, could you explain where you found the estimate so the reference can be added to the file page? Thanks. ▼PσlєοGєєк  ƧɊƲΔƦΣƉ▼  18:27, 14 November 2019 (UTC)
 * The Vallibonavenatrix size estimate is based on the material itself, seeing how as you have explained there is no size estimate from a reliable source. In this case, the estimate is based on the measurements provided in the paper. Eotyrannu5 (talk) 16:30, 17 November 2019 (UTC)
 * Since Malafaia et al. didn't actually give a size estimate for the animal, making one's own deductions based on the material plus that of related spinosaurs of similar size (as that's the only way to calculate the gap) seems to me like crossing the WP:OR line. Not sure though, we may need more opinions on this. ▼PσlєοGєєк  ƧɊƲΔƦΣƉ▼  00:19, 18 November 2019 (UTC)

Kamuysaurus life restoration
This is outside the usual scope of image review, since the image itself isn't inaccurate, however the author of the image (Masato Hattori) seems to be displeased that it is being used on wikipedia, a brand new user named User:Gjhrsd29 deleted the image from the article in both the english and japanese wikipedias, while he didn't make clear why he was removing the image in the edit descriptions, a message on his talk page says "It is a copyright violation to put the image of Kamuysaurus. The author does not give permission. Please do not post here." (There is another near identical message in japanese on the japanese talkpage) the stiff English and bilingual message suggests that the user is primarily a Japanese speaker. As I've noted on their talk page, the research paper says "The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material" and while there is no copyright notice on the image in the article, some of the press release versions of the image have © Masato Hattori attached. Hemiauchenia (talk) 21:05, 8 September 2019 (UTC)
 * Calling on User:FunkMonk Hemiauchenia (talk) 21:19, 8 September 2019 (UTC)
 * Hmmm, that's a strange case. We had something similar with the Sinosauropteryx image by Bob Nicholls, where he requested that we shrank the size, but it seems the new requests here is for total removal? Maybe this is something that should be taken up on Commons. We do have another free restoration of Kamuysaurus by the way, though it seems to be inaccurate: FunkMonk (talk) 21:37, 8 September 2019 (UTC)
 * To be fair, Bob Nicholls initially asked for a complete deletion of the image also. I think due to the language barrier it will be difficult to communicate with the artist with the required nuance to amicably resolve this. His email is at masato-h@kbe.biglobe.ne.jp if that is any use. Hemiauchenia (talk) 21:48, 8 September 2019 (UTC)
 * Has he dropped the issue? I would assume based on it still being there and this section be untouched for three weeks.  Luso titan  (Talk | Contributions) 03:30, 30 September 2019 (UTC)
 * I don't think so, but unless someone contacts him directly and sorts it out, or he starts a deletion request, the status quo will just remain. FunkMonk (talk) 03:35, 30 September 2019 (UTC)
 * It's worth noting that the image hasn't been restored on the Japanese wikipedia, so that's possibly why there hasn't been any action.Hemiauchenia (talk) 04:34, 30 September 2019 (UTC)

Request: Segnosaurus size diagram
As I'm going to expand the Segnosaurus article at some point, it would be nice with a size comparison. Greg Paul gives an estimate of 6 m. FunkMonk (talk) 21:01, 20 September 2019 (UTC)
 * I actually have one of these, but never uploaded it. I scaled it after Qilong's skeletal, which gave me only 3 meters. Molina-Pérez & Larramendi (2016) give an estimate of 6.9 meters, so I'm guessing that 6 meters is more plausible than 3. I will fix it and upload it shortly. --Slate Weasel (talk | contribs) 21:28, 20 September 2019 (UTC)
 * Here it is! Does it look okay? --Slate Weasel (talk | contribs) 21:40, 20 September 2019 (UTC)
 * Thanks, for some reason I was thinking of you, hehe. Yeah, I'm unsure what Headden based his estimate on, perhaps scaled after figures in old articles. But it seems much of the material involved has been lost or is inaccessible, so it's probably hard to get accurate measurements. One thing that is known and recently published on is the mandible, so you can maybe cross check with that. There is also an image of the pelvis with a scale bar, perhaps useful too. The image looks good, but I'd probably leave out the wing feathers since it seems you haven't covered the rest of the body in feathers, plus it's unknown if they even had wing feathers like that. Also, in such a pose, the dewclaw would not be raised so far off the ground, therizionosaurs kept even the dewclaw close to the ground (Headden's image shows it in a run with no foot fully grounded). See also Harman's Nothronychus skeletal: FunkMonk (talk) 21:44, 20 September 2019 (UTC)
 * I actually have feathered it, just more finely than therizinosaurs are often drawn (I could make it a bit shaggier if desired). I re-oriented the dewclaws and made the tail a bit more boldly feathered. I'm trying to get back in the habit of creating size charts, I got out of the habit over the summer... --Slate Weasel (talk | contribs) 22:47, 20 September 2019 (UTC)
 * Alright. Based on Beipiaosaurus, the feathers would be much shaggier and longer, though, even hiding much of the body contours. More similar to for example a cassowary. FunkMonk (talk) 22:50, 20 September 2019 (UTC)
 * Is this good enough or is more required? Therizinosaurs sure were strange critters! --Slate Weasel (talk | contribs) 23:37, 20 September 2019 (UTC)
 * Looks much more natural to me! I guess last thing that could be done is to see if it scales correctly with the scale bar for the mandible in this image? Also, a bit late in the game, but I believe therizinosaurs maybe held their backs a bit more vertically than shown here and in Headden's image (see Hartman's:, or this:), maybe someone else can confirm. FunkMonk (talk) 23:42, 20 September 2019 (UTC)
 * I rotated the axial region upwards a bit (it is still pretty horizontal for a therizinosaurid, but this is intentional as it makes it easier to display the animal's size). Don't worry about being late in the game for orientation, that's pretty easy to fix with SVG dinos. Scaling after the mandible, I get ~5m in length, so a little smaller than published estimates. Any more problems or is it ready? Also, did ornithomimids have caudal fans? (Why I'm asking this will hopefully become clear soon.) Nevermind, I figured out that they probably did, being in the Deinocheirus + Pennaraptora clade. However, I now realize that I'm not sure if therizinosaurs had caudal fans or not... --Slate Weasel (talk | contribs) 13:56, 21 September 2019 (UTC)
 * Strang with the scaling; it turns out that many of the fossils have become damaged or are even missing, so I'm not sure how these size estimates have even been made, as little has been published on the fossils since 1979, when they weren't even properly figured. Perhaps the tail could be made a bit longer to compensate (it is incompletely known anyway), not sure... As for a tail fan, all we know is that Deinocheirus had something like a pygostyle, which has been suggested to be an attachment point for a fan of feathers in at least that taxon. Other ornithomimosaurs don't seem to have pygostyles, but I'd restore them with at least a tuft of feathers at the tail tip. Also, it doesn't seem they had particularly advanced feathers, so maybe something like ratite feathers. As for therizinosaurs, I don't think we have any evidence for how tail feathers looked, and in any case, they would have had very shaggy, primitive feathers. FunkMonk (talk) 15:34, 21 September 2019 (UTC)
 * I've lengthened the tail a bit. Also, on the subject of ornithomimids, do their wings extend on to manual digit II or terminate at the wrist? --Slate Weasel (talk | contribs) 16:28, 21 September 2019 (UTC)
 * No one knows, all we have are quill knobs on the lower arm... I think either is ok, but first and foremost there should be wing feathers on the lower arm. FunkMonk (talk) 17:59, 21 September 2019 (UTC)
 * Re therizinosaur tail feathers: feathers have been found on the tail tip in Beipiaosaurus. They are essentially similar to the body feathers, with no noticeable increase in length or complexity (despite Beipiaosaurus having a pygostyle). Albertonykus (talk) 23:53, 22 September 2019 (UTC)

Ornithomimidae Size Comparisons
I have totaly overhauled my Ornithomimus size comparison based on GetAwayTrike's skeletals, using Paul's skeletal as a "reality check" for decrushing. I plan to make a size chart for Sinornithomimus, make a Struthiomimus silhouette, and dig up my old Gallimimus to make a group size comparison. How do the new Ornithomimus look? Also, any reccomendations for the family-level size comparison? --Slate Weasel (talk | contribs) 18:59, 21 September 2019 (UTC)
 * I think the outlines look fine, although the wings might need more larger feathers and the lifted leg calf muscle seems to be absent. IJReid { {T - C - D - R} } 19:14, 29 September 2019 (UTC)
 * I think that the seeming lack of enlarged calves on the lifted legs is due to them being obscured by the torso. I will play around with enlarging the wing feathers. --Slate Weasel (talk | contribs) 20:39, 2 October 2019 (UTC)


 * I made the wings on Ornithomimus bigger. I have also completed the chart for Sinornithomimus. The juvenile lacks the big wing feathers on account of juvenile Ornithomimus apparently lacking them too. I have given the subadult the original style of Ornithomimus wings that I used, as I assume that they would have been partially developed in this stage. Any comments? --Slate Weasel (talk | contribs) 11:47, 5 October 2019 (UTC)
 * Looks fine to me. IJReid { {T - C - D - R} } 15:09, 9 October 2019 (UTC)


 * I wasn't originally going to upload this, but... I realized that our current size comparison only showed Struthiomimus altus, so I went ahead and uploaded this anyways. Comments? Should I put S. sedens in quotes? --Slate Weasel (talk | contribs) 00:16, 12 October 2019 (UTC)
 * Why are they so far off the ground? Makes them appear taller than they really are.
 * Fixed. --Slate Weasel (talk | contribs) 21:02, 16 October 2019 (UTC)


 * Here's a Dromiceiomimus size comparison (surprise!) and the start of this project mutating into a very big initiative. Anyways, Dromiceiomimus' arms are ridicuously huge! This one was a bit harder to make, thanks to its obscurity and taxonomic instability. Did I manage to make it accurate enough? --Slate Weasel (talk | contribs) 00:02, 14 October 2019 (UTC)

Neuquenraptor Skeletal
Skeletal diagram of Neuquenraptor, dark grey represents integumentary structures. Comments? --Slate Weasel (talk | contribs) 15:07, 29 September 2019 (UTC)
 * The torso looks too slender vertically, and the upper arm should have more feathers, but that looks about it. IJReid { {T - C - D - R} } 19:15, 29 September 2019 (UTC)
 * Is this better? --Slate Weasel (talk | contribs) 20:50, 2 October 2019 (UTC)
 * Yep I think so. IJReid { {T - C - D - R} } 22:55, 2 October 2019 (UTC)

Carcharodonotsauridae size comparison
Yep we probably don't need more of this but since i was making this for some time now i'm posting this. Recenty low quality version of this comparison from my page was already posted by some user but gets deleted due to copyrights issue. Any comments?KoprX (talk) 19:23, 3 October 2019 (UTC)KoprX
 * Concavenator changed and neovenator added KoprX (talk) 13:07, 7 October 2019 (UTC)
 * Should probably be renamed "Carcharodontosauria size comparison", as Neovenator was a carcharodontosaurian but not a carcharodontosaurid. Fanboyphilosopher (talk) 15:48, 7 October 2019 (UTC) classic carcharodontosaurids is fairly stable, and the question of whether it belongs to Carcharodontosauridae proper is a matter of your definition of the family, a debate more about semantics than taxonomy. I'm going by Wikipedia's format, as we basically conform to the definition provided by Benson, Carrano, and Brusatte (2009), that being "The most inclusive (stem-based) clade comprising Carcharodontosaurus saharicus but not Neovenator salerii, Allosaurus fragilis or Sinraptor dongi." We also have a page for Carcharodontosauria, which was named in the same analysis to roughly replace the older definition of Carcharodontosauridae (closer to Carcharodontosaurus than Allosaurus or Sinraptor). Ask yourself where we would put this diagram, and whether it makes sense to put it on the page of Carcharodontosauridae rather than Carcharodontosauria. I say it makes much more sense to put it on the latter's page, so it should be considered a carcharodontosaurian size diagram and renamed as such. Another option would be to remove Neovenator, restricting the content to Carcharodontosauridae proper. Fanboyphilosopher (talk) 03:35, 8 October 2019 (UTC)
 * Ok I will just remove neovenator for nowKoprX (talk) 10:20, 8 October 2019 (UTC)
 * I would say removing Neovenator is unecessary, as well as a file name change. File names are essentially irrelevant because no one actually sees them in the context of the content, and the only uses would be on page Carcharodontosauria and the individual genus pages. The concept of a separate Neovenatoridae has fallen swiftly out of favour with the removal of Megaraptora, with more recent studies choosing instead to make Carcharodontosauridae = Carcharodontosauria. If someone requested the file name change on commons, I would reject it because it doesn't have the need for one, the name is not incorrect, the name described the content enough, and the name is understandable. Removing Neovenator makes an additional size comparison necessary, and renaming the file is of little consequence, so neither should be forced to happen. IJReid { {T - C - D - R} } 14:50, 8 October 2019 (UTC)
 * To argue that the concept of Neovenatoridae "has fallen swiftly out of favour with the removal of Megaraptora" is a false dichotomy, as the family does not necessarily rely on the inclusion of Megaraptora, even if BCB (2009) did name the family with the intent of including megaraptorans. I don't know where you're getting the impression that Neovenatoridae and Carcharodontosauria are not used anymore, it seems to me that far more papers use them than do not. In addition, we still have Siats to show that the family is not monotypic once megaraptorans are removed. I definitely consider Megaraptora outside of Neovenatoridae, but otherwise I agree with BCB (2009)'s conclusion that Neovenator is distinct enough to warrant its own family separate from typical carcharodontosaurids. Also, we already have a Neovenator size diagram (and several carcharodontosaurid ones now that I think about it), so an additional size diagram is not necessary anyways. Fanboyphilosopher (talk) 18:16, 8 October 2019 (UTC)
 * The reason why i put this diagram on wikipedia is becouse someone already post comparison from my page in low quality(i have no problem with this but that diagram was deleted automatically becouse of copyright issue) therefore I thaught it should be reviewed here KoprX (talk) 19:55, 8 October 2019 (UTC)
 * I think the diagram is fine with the content and file name it currently has. No analyses have been conducted where Siats is a neovenatorid without megaraptorans, and very few if any distinguish both Carcharodontosauridae and Carcharodontosauria, because Neovenator is not resolved with any sisters. Our personal opinions are irrelevant in this, there is no overwhelming use of Neovenatoridae as valid recently, and there are no criteria to recommend a file name change here. IJReid { {T - C - D - R} } 23:20, 8 October 2019 (UTC)
 * Siats hasfew megaraptoran synapomorphies (as described in the Megaraptor juvenile skull paper) so currently its most likely position is as a sister to Neovenator in the absence of better data. As for papers which retain the clade name "Carcharodontosauria", all of Benson, Carrano, and Brusatte's many subsequent carcharodontosaurid-focused papers do so, as well as the slew of new Concavenator papers, the Neovenator neuroanatomy paper, the Aoniraptor description, most megaraptoran-focused papers (though admittedly these are probably irrelevant), and various recent papers describing Iberian and Asian carnosaur remains. It seems like only Novas's papers retain Stromer (1931)'s wider definiton of Carcharodontosauridae, and even then some use Carcharodontosauria (such as the one on Mapusaurus heterochrony). I assume any paper which uses Carcharodontosauria is doing so in reference to BCB (2009), as they named the clade specifically so that Neovenator would not be considered a carcharodontosaurid. And based on recent carcharodontosaur research, this seems to be close to a consensus. Fanboyphilosopher (talk) 03:37, 9 October 2019 (UTC)
 * Well to avoid any controversy I will just exclude neovenator and depict only true carcharodontosaurids. What do you think about makeing second diagram that would include genera such as allosaurus sinraptor yangchuanosaurus neovenator? KoprX (talk) 14:16, 9 October 2019 (UTC)
 * If you have enough to add multiple taxa, go for it, but metriacanthosaurs aren't very well described. IJReid { {T - C - D - R} } 15:07, 9 October 2019 (UTC)

Dromaeosauridae size comparison
This image was added to pages Dromaeosauridae and Dakotaraptor without being reviewed first. Are there any problems with it? Kiwi Rex (talk) 16:25, 3 October 2019 (UTC)
 * Pinging the author, . I realize that none of their images have passed through here. Some do seem to have inaccuracies (i. e. File:Hell Creek Formation Fauna.png shows Quetzalcoatlus and Mosasaurus, which haven't been recovered from there as far as I know, the Pellegrinisaurus skeletal shows the dorsal neural arches as known material). Nothing jumps out at me about this particular image, although a list of references would be nice. --Slate Weasel (talk | contribs) 22:52, 3 October 2019 (UTC)
 * I would be grateful if you could point out the specific inaccuracies in some of my images (except for the already mentioned Pellegrinisaurus). Talking about Mosasaurus and Quetzalcoatlus, the specimen BMR P2002.2 (neck vertebra found in Hell Creek) was associated to Quetzalcoatlus. For Mosasaurus, I'm pretty sure that the remains of a mosasaur has been recovered from Hell Creek in 2016. PaleoNeolitic (talk) 00:17, 4 October 2019 (UTC)
 * Both being indeterminate within their families.  Luso titan  (Talk | Contributions) 04:34, 4 October 2019 (UTC)
 * It's worth noting that previously raised a few concerns about the Hell Creek diagram on the file talk page, which appear to have gone largely overlooked (understandably, given how few people likely follow file talk pages). Albertonykus (talk) 10:23, 5 October 2019 (UTC)
 * It should also be noted that being assigned to cf. Quetzalcoatlus - note it's cf., indicating the specimen is similar to Quetzalcoatlus but cannot be confidently referred - doesn't mean it indicates the presence of Q. northropi-sized azhdarchids in the Hell Creek Formation, as the diagram implies. I have seen the specimen in person; it's only 37 centimeters long, which would make it roughly the same size as the smaller Quetzalcoatlus sp. from the Javelina Formation. While their existence cannot be ruled out, we have no evidence of giant azhdarchids in the Hell Creek Formation yet. Shuvuuia (talk) 12:27, 6 October 2019 (UTC)
 * In that case, would it be appropriate/accurate to change the name to Azhdarchid indeterminate? PaleoNeolitic (talk) 14:22, 6 October 2019 (UTC)
 * I think that that would probably be the safest move. However, I have some more comments on Pellegrinisaurus. First of all, the entire femur is shown as fully preserved, even though it is not. Some parts of some of the caudal neural arches are also missing. Additionally, why is the space between the caudals shown in white? Also, what sources did you use to draw it? The file description has no citations. --Slate Weasel (talk | contribs) 12:01, 14 October 2019 (UTC)
 * I think the Pellegrinisaurus tail needs re-posing; I'm pretty sure the upward curvature of the tail figured in Salgado was meant to accommodate a tail-dragging posture. Also, the way that incompleteness of the caudal vertebrae are indicated is visually confusing and the dorsal centra look a little bit too small. Also, this is more a matter of personal preference, but I think skeletal diagrams should generally avoid elaborate, speculative soft-tissue structures. Ornithopsis (talk) 21:09, 14 October 2019 (UTC)
 * Thanks, taking all the suggestions into work, already updating the Hell Creek Fauna. I think Pellegrinisaurus will take some time, but I'll improve it. The references I used for the skeletal diagram were the Ameghiniana paper and the Scott Hartman's Alamosaurus skeletal (for the silhouette). PaleoNeolitic (talk) 02:57, 16 October 2019 (UTC)
 * Updated skeletal, something missing? . PaleoNeolitic (talk) 04:33, 17 October 2019 (UTC)
 * The font for the name is distracting and difficult to read if you don't already know the species. IJReid { {T - C - D - R} } 14:52, 17 October 2019 (UTC)
 * This is an improvement in terms of visual clarity (apart from the font issue), but you appear to have the dorsal vertebrae backward and the femur is shown in posterior view when the skeletal is in lateral view. I feel like the tail could be refined as well, but don't have any specific criticism offhand. Ornithopsis (talk) 19:28, 17 October 2019 (UTC)
 * Already explained why the posterior view of the femur in the description. Font changed to Old English Text MT and corrected dorsal vertebrae orientation. PaleoNeolitic (talk) 22:57, 17 October 2019 (UTC)
 * I still think that the femur should be illustrated in lateral view, as showing the posterior view could give the viewer the false impression that Pellegrinisaurus could rotate its leg 90 degrees. Hypothetical lateral views have been done in the published literature (i.e. Maraapunisaurus). The best way to do one is to find the same element in a related taxon that's figured in the lateral view and then modify it to match the proportions of the desired taxon. --Slate Weasel (talk | contribs) 13:44, 18 October 2019 (UTC)
 * Femur view updated, better now? PaleoNeolitic (talk) 23:45, 18 October 2019 (UTC)


 * It is kind of misleading that they hold their heads and backs at different levels, which gives the illusion of different relative heights than they would have if they were in more similar poses. FunkMonk (talk) 13:55, 18 October 2019 (UTC)
 * The only raptor holding the head at different level is Achillobator, which is about 5 meters (following the original paper). Small compared to the others, and the backs are

anatomically different. PaleoNeolitic (talk) 23:45, 18 October 2019 (UTC)

Titanoceratops Skeletal
I've created a Titanoceratops skeletal. I didn't apply perspective to the scapula - should I? Any other input/corrections/comments/questions/criticism/ideas? --Slate Weasel (talk | contribs) 21:00, 5 October 2019 (UTC)
 * What do the grey areas indicate? Could be stated. FunkMonk (talk) 21:11, 5 October 2019 (UTC)
 * I've added a color key to the description. I probably should add this more often, as there is basically NO consistency among skeletal drawing about what these colors mean, which can lead to misinterpretation about the status of the fossil material. --Slate Weasel (talk | contribs) 21:27, 5 October 2019 (UTC)


 * Does anyone mind if I add this to the taxobox in Titanoceratops later this week? --Slate Weasel (talk | contribs) 21:03, 16 October 2019 (UTC)
 * Why the taxobox? Just replace the existing size comparison since this includes a human scale.  Luso titan  (Talk | Contributions) 23:01, 16 October 2019 (UTC)
 * The problem with the taxobox mount is that it's restored with Pentaceratops instead of other triceratopsins, and we generally don't put inaccurate images in the taxobox. I can, however, just replace the existing size comparison if it's desired. --Slate Weasel (talk | contribs) 13:38, 18 October 2019 (UTC)
 * I would suggest the closeup image from further down the page go in the taxobox.  Luso titan  (Talk | Contributions) 17:22, 18 October 2019 (UTC)
 * Good idea. I've implemented these changes. --Slate Weasel (talk | contribs) 22:14, 18 October 2019 (UTC)

Daxiatitan Size Comparison
Size comparison of Daxiatitan created for no obvious reason. I've also scaled "Huanghetitan" ruyangensis based on the generic macronarian silhouette that I made (I got ~24m), so I can also upload that if desired. Any input on this one? --Slate Weasel (talk | contribs) 00:23, 9 October 2019 (UTC)
 * Sure, somphospondylans need some love. IJReid { {T - C - D - R} } 15:08, 9 October 2019 (UTC)
 * It's been uploaded. Comments? --Slate Weasel (talk | contribs) 00:04, 14 October 2019 (UTC)
 * Nope its as deep-chested as a Huanghetitan should be. IJReid { {T - C - D - R} } 16:31, 14 October 2019 (UTC)


 * I've updated my Xinjiangtitan (some regions were somewhat bubble-wrapped, I was also unaware of the caudal series at the time). It's still gigantic, at 30m long. Since ~2 Cds are missing, that's a pretty solid length estimate (looking at... pretty much everything else in that size class). This sauropod deserves so much more credit than it gets. Is there anything else in the size comparison that needs fixing? --Slate Weasel (talk | contribs) 00:10, 21 October 2019 (UTC)

Chilantaisaurus Skeletal


Here's a Chilantaisaurus skeletal. All necessary info can be found in the file description. How does it look? --Slate Weasel (talk | contribs) 19:10, 13 October 2019 (UTC)
 * The forelimb looks too thin in the silhouette, but thats about all I can see to comment on. IJReid { {T - C - D - R} } 16:29, 14 October 2019 (UTC)
 * Is this better? --Slate Weasel (talk | contribs) 21:02, 16 October 2019 (UTC)

Hudiesaurus Skeletal
Skeletal diagram of Hudiesaurus, the somewhat(?) giant(?) mamenchisaurid. I tried to make the silhouette look a little less weird, but mamenchisaurids are just weird animals in general. Comments? I could also make a size comparison to showcase the 22-30m range of length estimates if it's desired. --Slate Weasel (talk | contribs) 19:30, 20 October 2019 (UTC)
 * With only one bone it's impossible to be sure but I suspect that the silhouette should be scaled up somewhat, I find difficult to imagine the rest of the dorsal collum fitting in the silhouette. Years back, I knocked this image together using Pauls older (with longer forelimbs) M. hochuanensis and just visually scaled it up so that the Hudiesaurus vertebra approximated c18. (Funny how an image I originally hosted on my old photobucket becomes one of the first hits on google). SVPOW pointed out that the Hudiesaurus vertebra is the same length as c17 in M. hochuanensis, however, it's proportionally taller and its height to length ratio conforms better to c18. Steveoc 86 (talk) 12:02, 4 November 2019 (UTC)
 * I've rescaled it after both skeletals and got ~27m in length. Does this look better? --Slate Weasel (talk | contribs) 16:09, 4 November 2019 (UTC)

Appalachiosaurus skull
The skull looks like that of a derived tyrannosaurid and not a basal eutyrannosaur. In particular the maxilla looks far too deep given that we have the lower edge of the maxilalpresent in the posterior portion. It strongly contradicts the reconstruction given in Carr et al 2005, which can be seen in Other reconstructions based on the paper, the skull in particular is also much more boxy than the reconstruction in Carr et al. Hemiauchenia (talk) 17:51, 31 October 2019 (UTC)
 * Hard to say, the skull doesn't seem complete enough to determine the exact shape either way. I assume that reconstruction is based on the actual fossil material. I know there were some inaccurate initial interpretations of the fossils, for example part of the pelvis was mistaken for an arm bone. So there is probably some leeway in interpretation. FunkMonk (talk) 09:48, 4 November 2019 (UTC)

Some Size Comparison Updates
Over the next few weeks I'm planning on updating some of these old size comparisons. I'm thinking of supplying the theropods with lips. I recently redrew my Camptosaurus and Iguanodon, so I'll update those first. I can also try to fix any of my other old size comparisons if requested. --Slate Weasel (talk | contribs) 12:20, 27 April 2019 (UTC) contribs) 22:16, 3 May 2019 (UTC)
 * The Iguanodontia size comparison has been updated. Pinging for input. --Slate Weasel (talk | contribs) 19:33, 27 April 2019 (UTC)
 * Cedarosaurus has been updated, and now is based on PaleoKing's skeletal instead of Hartman's (although the plantigrade feet have been retained). No ghosts this time around... the silhouette's opaque. --Slate Weasel (talk | contribs) 21:43, 28 April 2019 (UTC)
 * Gryposaurus gets a total overhaul, and less of a dewlap and more feature scales! Comments? --Slate Weasel (talk | contribs) 23:51, 28 April 2019 (UTC)
 * Giganotosaurus is overhauled and re-scaled! Comments? --Slate Weasel (talk |
 * Giganotosaurus overall looks fine just seems too tall. Hartman's MUCPv-Ch1 is about 3.5m at the hips and head is about same high KoprX (talk) 13:50, 5 May 2019 (UTC)KoprX
 * I think that it may just be that the leg is straighter here than in Hartman's skeletal, but it does seem to be almost 3.5 m in the above chart, too. The head is higher than the hip here because it is leaning upwards (as if to bite a taller target). --Slate Weasel (talk | contribs) 14:52, 5 May 2019 (UTC)
 * just a minor issue: on the comparison with all the iguanodontians, there's a typo: Iguaonodon should be Iguanodon! also on the large ornithopods diagram it says Edmontosaurus annectAns instead of annectens. Audrey.m.horn (talk) 01:15, 7 May 2019 (UTC)
 * Thanks for catching those! Iguanodon's been fixed, and I'll fix the giant ornithopods one with its update. --Slate Weasel (talk | contribs) 21:18, 7 May 2019 (UTC)


 * Giant ornithopods have been updated! Comments? --Slate Weasel (talk | contribs) 00:42, 8 May 2019 (UTC)
 * Are their hands all still pronated?  Luso titan  (Talk | Contributions) 00:44, 8 May 2019 (UTC)
 * Which ones originally had pronated hands? Iguanodon certainly doesn't anymore, but Magnapaulia seems like it might... --Slate Weasel (talk | contribs) 11:30, 8 May 2019 (UTC)
 * All of them other than Iguanodon as far as I can tell, but it's hard to call with silhouettes.  Luso titan  (Talk | Contributions) 19:58, 8 May 2019 (UTC)
 * I think that the only problems are Edmontosaurus & Magnapaulia, looking at my references. I will fix those soon (hopefully). --Slate Weasel (talk | contribs) 16:21, 22 June 2019 (UTC)
 * , I've modified the hands of the above two and Shantungosaurus and Saurolophus. --Slate Weasel (talk | contribs) 16:10, 24 June 2019 (UTC)


 * Oxalaia has been updated. Pinging for input. --Slate Weasel (talk | contribs) 16:21, 22 June 2019 (UTC)
 * The snout-tip could match the skull diagram more closely, since one of Oxalaia's main autapomorphies is that it had a less sharply-sloping premaxilla than Spinosaurus. Though I'm aware that soft tissue could've extended/changed the snout's external appearance to some degree, I think in this case it'd be better to represent this feature more conservatively for such a fragmentary species. Another suggestion I'd make is to change the body length back to 13 metres again so it's directly between the 12-14 m estimate. Other than those two minor points, I think it looks good. Nice to see you're still making lots of great diagrams! Hopefully I'll be back to contributing some of my own soon. ▼PσlєοGєєк  ƧɊƲΔƦΣƉ▼  15:28, 23 June 2019 (UTC)
 * Is this closer? --Slate Weasel (talk | contribs) 18:35, 23 June 2019 (UTC)
 * Yep, looks good to me now, thanks. ▼PσlєοGєєк  ƧɊƲΔƦΣƉ▼  23:01, 23 June 2019 (UTC)


 * Futalognkosaurus has been recreated with by modifying my new Argentinosaurus. This time it is actually scaled based on Hartman's reconstruction. Comments? --Slate Weasel (talk | contribs) 18:44, 22 June 2019 (UTC)
 * Kritosaurus has been updated to match Gryposaurus. Comments? --Slate Weasel (talk | contribs) 19:01, 22 June 2019 (UTC)
 * Starting to work on abelisaurids. Skorpiovenator is done. Comments? --Slate Weasel (talk | contribs) 22:04, 22 June 2019 (UTC)
 * Not sure if anyone's going to see this (it's so far up now), but I've updated my Mapusaurus to look less cartoony. Comments? --Slate Weasel (talk | contribs) 12:29, 2 November 2019 (UTC)
 * Ahahah I see this. All of them look fine, but for Torvosaurus and Gigantosaurus I'd suggest adjusting so the silhouettes aren't almost completely overlapped, and the Torvo could probably use a colour adjustment since its so bright rn. IJReid { {T - C - D - R} } 16:33, 2 November 2019 (UTC)
 * Ah good, it's been seen! I've just overhauled Carcharodontosaurus (again). Should I replace the current one in the article (it's based on my older comparison)? Torvosaurus hasn't been updated yet - I'm somewhat confused by it being "too bright," as I used dark orange and dark blue. Do you mean that the colors are too saturated? Anyways, coloration can be fixed when it gets lips. Also, Euhelopus is proportionately terrible right now - I should really get around to fixing its size comparison (I already have a revised silhouette, so this shouldn't take too long). --Slate Weasel (talk | contribs) 01:38, 4 November 2019 (UTC)
 * Do you have plans to update the Torvo/Euhelo/Ceratopsian limbs as mentioned above? Just working on archival for these remaining sections. IJReid { {T - C - D - R} } 15:50, 2 December 2019 (UTC)
 * Everything in this section's been updated, feel free to archive it unless something's amiss. I'll tackle ceratopsians sometime later this week (shouldn't take too long... maybe). --Slate Weasel (talk | contribs) 01:39, 3 December 2019 (UTC)

Allosauroidea size comparison
Yes this one needs a name change my mistake, should i swap saurophaganax with concavenator? Any mistakes spotted?
 * I have quite a few comments on this, so I'll do it in a bulleted list:
 * Giganotosaurus: okay based on the Franoys skeletal (although Hartman's has slightly different proportions).
 * Acrocanthosaurus: skull seems a bit too small.
 * Saurophaganax: skull could be bigger. Concavenator is known from much more material and less taxonomically controversial, however, so it may make a better addition than Saurophaganax.
 * Yangchuanosaurus: the skull seems too shallow, and the profile of the back doens't appear to be correct.
 * Allosaurus: arm (especially hand) way too small, torso too shallow, femur too short, skull too small (especially in depth).
 * Sinraptor: skull considerably too small.
 * Neovenator: skull seems too long and too shallow. Checking the length of the metatarsus may be a good idea.
 * Also, I do plan to update my Saurophaganax size comparison eventually (hopefully soon, but I've been saying that for a few months now). --Slate Weasel (talk | contribs) 21:56, 12 October 2019 (UTC)
 * Really appreciate detailed feedback with referances I tried my best when fixing this KoprX (talk) 11:13, 14 October 2019 (UTC)

November Part 1
I'm doing this again. I can't promise how regular this is going to be, but I'm going to try to upload a size comparison a day throughout November. Here's the first one: the long-necked unayosaurid Macrocollum itaquii. I've worked out a rough schedule, but I'm still open to requests for particular genera (I may not be able to fulfil them, though). Any comments on this first size comparison? --Slate Weasel (talk | contribs) 00:16, 1 November 2019 (UTC)
 * In relation to the current taxobox image: Macrocollum looks quite a bit larger in the taxobox image. Is it the longer legs? Lythronaxargestes (talk &#124; contribs) 01:55, 1 November 2019 (UTC)
 * To be honest I'm a bit baffled by it myself. I think that I scaled mine to femoral length, which gave a TL of ~3.5m like the article said. Also, compared with the humans, both Macrocollum seem to have roughly the same hip height. I think that my human might be taller, but I'll investigate this further. It's pretty perplexing. --Slate Weasel (talk | contribs) 12:56, 2 November 2019 (UTC)


 * Here's a Bagualosaurus for day 2, bringing along a nifty multi-image template. Comments? Also, Bagualosaurus has nothing to do with bagels. --Slate Weasel (talk | contribs) 12:56, 2 November 2019 (UTC)
 * Funny, same discrepancy with size again... note that the article gives a size estimate of 2.5 m. Also, the shoulders seem to be deeper than they are reconstructed in the paper, any reason for this? (I suppose the paper's skeletal diagram is more schematic than rigorous.) Lythronaxargestes (talk &#124; contribs) 17:33, 2 November 2019 (UTC)
 * The femur's only 215mm long, according to the paper, which is similar to my silhouette's femoral length. I scaled this one with the skeletal's scale bar. I'm not sure what to do about this... the size estimate seems to come from a news report, though. That may explain it. --Slate Weasel (talk | contribs) 19:36, 2 November 2019 (UTC)


 * I've uploaded an Adeopapposaurus for day 3. And... there's no size discrepency this time! Woohoo! Anyways, this is a very strange critter, apparently it had a keratinous beak. Have I added too much flesh to the feet? --Slate Weasel (talk | contribs) 20:27, 3 November 2019 (UTC)
 * Wow, very large halluces! Two comments - the back foot's positioning looks a bit awkward (could be more vertical?) and the tail tapers pretty sharply at the end (not sure if that's intentional). Lythronaxargestes (talk &#124; contribs) 20:41, 3 November 2019 (UTC)
 * Is this better for the foot or is it too vertical now? The tail does indeed look like that. As for the halluces, you should check out those of Massospondylus! I bet it would hurt a lot to get kicked by these guys! --Slate Weasel (talk | contribs) 22:50, 3 November 2019 (UTC)
 * It does look better! Lythronaxargestes (talk &#124; contribs) 03:39, 4 November 2019 (UTC)


 * Seitaad has came for day 4. Have I overextended the near leg? --Slate Weasel (talk | contribs) 14:06, 4 November 2019 (UTC)
 * I've beefed up the arms on this guy a bit. Comments? --Slate Weasel (talk | contribs) 17:57, 24 November 2019 (UTC)


 * Xingxiulong for day 5. Comments? --Slate Weasel (talk | contribs) 22:14, 5 November 2019 (UTC)
 * I'd buff up the shoulders and gut a bit. The head also strikes me as a bit large. I know it's quite large on the skeletal diagram, but that's probably more of the outline than anything else. Lythronaxargestes (talk &#124; contribs) 22:26, 5 November 2019 (UTC)
 * Is this better? --Slate Weasel (talk | contribs) 21:55, 8 November 2019 (UTC)
 * Looks better, thanks. Lythronaxargestes (talk &#124; contribs) 21:19, 9 November 2019 (UTC)
 * FYI, I've added this one to the article :) Lythronaxargestes (talk &#124; contribs) 00:49, 18 November 2019 (UTC)

November Part 2
Choconsaurus for day 7. I modified my Mendozasaurus proportions to fit it. Comments? Sorry about day 6... I'll get around to it (and Xingxiulong and Euhelopus) when it's more convenient for me. --Slate Weasel (talk | contribs) 21:09, 7 November 2019 (UTC)
 * Tazoudasaurus for day 8. This one looks kind of strange? Is this natural or an error? --Slate Weasel (talk | contribs) 21:49, 8 November 2019 (UTC)
 * I think your Tazoudasaurus is too small-headed and long-necked. In addition, both Greg Paul and Peyer & Allain's skeletals of Tazoudasaurus depict a humerus:femur ratio much higher than indicated in the actual fossils (it's 0.85 in the skeletals but 0.64 according to Table 1 in Peyer & Allain 2010), and your silhouette matches the skeletals but not the measurements. Ornithopsis (talk) 01:44, 9 November 2019 (UTC)
 * Ouch! How did they get it that wrong?! Anyways, I'll fix it as soon as I can. --Slate Weasel (talk | contribs) 13:19, 9 November 2019 (UTC)
 * I'll add that I've been trying to make a skeletal of Tazoudasaurus myself, and getting a rather different profile than Paul or Peyer & Allain's skeletals—I'm pretty sure Paul's skeletal is essentially a reposed version of Peyer and Allain's, as he repeats at least three mistakes made in it (shape of the ilium, shape of the mandible, length of the forelimb). My skeletal gives it a much more compact torso than Paul or Peyer & Allain give it, but I'm not sure if that's getting into OR/OS territory. For the time being, a couple of other comments—you've depicted the manus as being very columnar, without a visible thumb claw, and I'm not sure that's correct, and you've depicted the hind legs as being too thin--the tibia of Tazoudasaurus is much more robust than Paul depicts, and does not fit inside your silhouette. Ornithopsis (talk) 18:54, 9 November 2019 (UTC)
 * I agree that the skull is too small and the manus to columnar. Tazoudasaurus still had the primitive spreading manus. --Jens Lallensack (talk) 19:32, 9 November 2019 (UTC)
 * How much bigger does the skull need to be? It's about 40cm now. I'll fix the manus after the reconstruction in the paper. I'll check the neck and torso lengths, also, I fear that my scapula isn't angled enough. I'll take a look at the tibia, too. I'll attempt to get it done soon, but I'm not sure when I'll be able to do this more in-depth evaluation, so updates might not come for several days. Anything else wrong? Why are skeletals in papers so frequently very... incorrect? --Slate Weasel (talk | contribs) 23:41, 9 November 2019 (UTC)
 * Updates are done... I think. Is this better? --Slate Weasel (talk | contribs) 21:51, 10 November 2019 (UTC)
 * The head looks about right to me, but the forelegs and neck still both seem too long. Tazoudasaurus had a more or less diplodocid-like forelimb:hindlimb ratio, and broadly similar proportions to Shunosaurus, so I think the back would be nearly horizontal. Relevant ratios calculated from table 1 of Peyer & Allain 2010: humerus:femur ~0.64, antebrachium:humerus ~0.70; I estimate your silhouette as showing h:f as 0.75 and a:h as 0.80. Not sure why Peyer & Allain draw it so differently from the proportions indicated by their measurements. Ornithopsis (talk) 22:38, 10 November 2019 (UTC)
 * Does this look better, ? --Slate Weasel (talk | contribs) 20:01, 17 November 2019 (UTC)
 * You don't appear to have modified the forelimbs at all. As I said, the published skeletals contradict the measurements presented in table 1 of Peyer & Allain 2010; the forelimb was pretty short based on the measurements and with a proportionally fairly short radius+ulna in comparison to Vulcanodon. The neck looks fine now, so it's just the forelimbs that I still object to.Ornithopsis (talk) 01:31, 21 November 2019 (UTC)
 * , I've shrunk the arms again. Is this better? It now looks super chunky, even alongside Neuquensaurus! --Slate Weasel (talk | contribs) 21:14, 23 November 2019 (UTC)
 * I don't mean to be rude, but is there something about "the radius and ulna, specifically, should be shorter" that I am failing to convey? You've revised it multiple times, seemingly only changing the length of the upper forelimb and leaving the too-long lower forelimb unchanged. Now you've got the humerus too short and the radius+ulna too long. Here's some of the bones (cross-scaled from specimens 2, 4, 5, and 8), with red lines showing my interpretation of your forelimb's bones: Ornithopsis (talk) 02:40, 24 November 2019 (UTC)
 * Oops... I seem to have totally missed that, even though you stated it quite clearly above. Sorry about that. I think that the arms should be more accurate now (the image you linked was a huge help!). --Slate Weasel (talk | contribs) 15:25, 24 November 2019 (UTC)
 * Glad to help! As far as I'm concerned, it looks good to go now! Ornithopsis (talk) 18:43, 24 November 2019 (UTC)


 * Erketu for day 9. Man, that neck's outrageously long. Comments? --Slate Weasel (talk | contribs) 01:20, 9 November 2019 (UTC)
 * (time warp) Chuanjiesaurus for day 6. Comments? --Slate Weasel (talk | contribs) 13:19, 9 November 2019 (UTC)
 * Neuquensaurus for day 10. Comments? --Slate Weasel (talk | contribs) 00:45, 10 November 2019 (UTC)
 * Should probably show the presence of osteoderms of some sort since Neuquensaurus has them. IJReid { {T - C - D - R} } 03:27, 10 November 2019 (UTC)
 * Titanosaurs had very sparsely distributed osteoderms, and their exact placement is not known. It's entirely possible that they would have been positioned so as to not be visible in lateral silhouette. That said, are you sure that it's robust enough? It looks a bit thin-legged to me but that's just my impression. Ornithopsis (talk) 03:37, 10 November 2019 (UTC)
 * I beefed up the limbs a bit (saltasaurs were not known for their gracility). I omitted osteoderms because of the confusion surrounding them - and that they might have looked like this. --Slate Weasel (talk | contribs) 21:51, 10 November 2019 (UTC)


 * Thanks for all these nice charts. Would you consider doing one for Ohmdenosaurus (length, according to the first description, is 3–4 m)? I was thinking about expanding the article in the near future … --Jens Lallensack (talk) 19:25, 9 November 2019 (UTC)
 * Ohmdenosaurus would be interesting to do. Would the Vulcanodon skeletal be a good base reference for it (any necessary modifications would be made, of course)? It probably won't come around terribly soon, but I'm thinking of uploading a few extra sauropod(omorph?) size comparisons sometime this month... --Slate Weasel (talk | contribs) 23:41, 9 November 2019 (UTC)
 * Ohmdenosaurus is in the unfortunate position of being both very incomplete and having a poorly-understood phylogenetic position. The closest there has been to commentary on the phylogenetic position of Ohmdenosaurus are a couple of comparisons noting that it resembles Rhoetosaurus more closely than other early sauropods, which could indicate that Ohmdenosaurus is closer to Eusauropoda than Vulcanodon or Tazoudasaurus, so Vulcanodon might not be the best model. Spinophorosaurus might be better? Ornithopsis (talk) 00:50, 10 November 2019 (UTC)
 * Thanks; please take your time, I have some other things to finish until I can work on that article anyways. Yes, it is too incomplete to be included in any phylogenetic analysis. Vulcanodon or a generic non-eosauropod sauropod would work imo, Spinophorosaurus might also work though the position of that taxon is unclear as well (might be a eusauropod already). --Jens Lallensack (talk) 08:53, 10 November 2019 (UTC)
 * When I get around to it, Rhoetosaurus will probably also be a major basis for this silhouette. --Slate Weasel (talk | contribs) 21:51, 10 November 2019 (UTC)

Ferrisaurus headshot posted without review
This Ferrisaurus reconstruction by was posted without review. Is it really appropriate to illustrate a page on a species with no known cranial elements with a drawing of only the head? I've noticed a few cases of such reconstructions being posted on this page, usually with that same criticism being made, and I was wondering if there should be some guidelines on whether such reconstructions are a good idea or not. Ornithopsis (talk) 00:57, 9 November 2019 (UTC)
 * I agree with this criticism. In fact, I am not sure such an illustration is even necessary when Figure 2 of the paper contains a more-than-adequate silhouette with realistic proportions. Lythronaxargestes (talk &#124; contribs) 03:41, 9 November 2019 (UTC)
 * Perhaps if it had a long page, but as it will undoubtedly only have a stub or at best start-class article there won't be room for it anyways as the figures from the paper are more important.  Luso titan  (Talk | Contributions) 06:10, 9 November 2019 (UTC)
 * I do almost think maybe we need a rule that we shouldn't have reconstructions that don't feature any of the preserved material... Tomopteryx (talk) 10:16, 9 November 2019 (UTC)
 * I agree that that rule might be a good idea, but with an exception for images showing environments: for example, a dinosaur known from only tail vertebrae could be depicted with its tail obscured if it was depicted in its environment based on other fossils from the formation/locality. In that case, the information from the fossils being conveyed in the photo is "a species in this clade existed in this ecosystem". Back to this image specifically, though, I wonder if we could treat the illustration as whatever species PaleoEquii based it off of, or use it on the Leptoceratopsidae page—the need for illustrations of dinosaurs in non-lateral views has been on my mind. What does think of that? Ornithopsis (talk) 18:43, 9 November 2019 (UTC)
 * Perhaps it'd go best on the leptoceratopsid page? As it is ostensibly a generic leptoceratopsid, and the Leptoceratops page is already pretty overloaded with images for such a short article. Tomopteryx (talk) 21:35, 9 November 2019 (UTC)


 * At the very least it needs the "speculative paleoart" tag. But I agree, making restorations entirely focusing on unknown parts is misleading and should be avoided. FunkMonk (talk) 22:01, 13 November 2019 (UTC)
 * Then if there's no objections, I will remove the image from the Ferrisaurus page and add it to the Leptoceratopsidae page. Ornithopsis (talk) 01:43, 21 November 2019 (UTC)

November Part 3
Moving away from sauropodomorphs... sort of (I've still got to work on Tazoudasaurus a bit more)... we reach theropods. Condorraptor for day 11. Comments? Also, I updated my Concavenator - any comments on that? Are the legs too robust? Are the arms too thin? --Slate Weasel (talk | contribs) 01:02, 11 November 2019 (UTC)
 * Whew, cut it a little close this time, with less than an hour to spare! Here's Segisaurus, which is bigger than stated to the article, but at least Holtz got a similar size! Comments? --Slate Weasel (talk | contribs) 23:21, 12 November 2019 (UTC)
 * I feel like you would get 1 m exactly if you decapitated it like the holotype, haha... Lythronaxargestes (talk &#124; contribs) 02:48, 14 November 2019 (UTC)


 * Eoabelisaurus for day 13. Comments? --Slate Weasel (talk | contribs) 21:47, 13 November 2019 (UTC)
 * Zupaysaurus is here for day 14, and it's a lot more complete than I realized! Comments? Also, how big is the scale bar in the taxobox of Dracoraptor? I can't find a label for it anywhere... --Slate Weasel (talk | contribs) 12:56, 14 November 2019 (UTC)
 * I figured out the scale bar's length (5cm), so here's Dracoraptor for day 15. Halfway done! Comments? Coelurosaurs will be coming over the next five days. --Slate Weasel (talk | contribs) 00:19, 15 November 2019 (UTC)
 * Very minor nitpicks about the skull shape - the posterior ventral edge of the upper jaw looks like it's convex where it should be concave, and the mandible seems to be a bit thin? Lythronaxargestes (talk &#124; contribs) 01:41, 17 November 2019 (UTC)
 * Does this look better? --Slate Weasel (talk | contribs) 19:24, 17 November 2019 (UTC)
 * Probably clearer with an image: You've put some lip tissue on the skull, but I feel that it should perhaps follow the shape of the skull more closely. Lythronaxargestes (talk &#124; contribs) 21:05, 17 November 2019 (UTC)
 * I've changed the shape again. --Slate Weasel (talk | contribs) 23:04, 17 November 2019 (UTC)
 * I think it's good now. Lythronaxargestes (talk &#124; contribs) 23:47, 17 November 2019 (UTC)


 * The Zupaysaurus seems to have exaggerated crests, it appears they are just displaced bones and that it didn't actually have a crest. FunkMonk (talk) 16:41, 17 November 2019 (UTC)
 * I've heard of things like that... what would the revised skull look like? Are there are reconstructions of this? --Slate Weasel (talk | contribs) 19:24, 17 November 2019 (UTC)
 * Here is one on Deviantart, can't say how accurate it is (my old restoration in the article also tones them down): FunkMonk (talk) 21:13, 17 November 2019 (UTC)
 * According to Ezcurra : "Arcucci and Coria (2003) described the presence of a pair of parasagital crests on the skull roof of Zupaysaurus. This interpretation was dismissed by Ezcurra and Novas (2005, in press), who indicated that the right nasal is disarticualted with its dorsal surface facing toward the left lateral side of the skull." Figure 3 therein has a good skull reconstruction: Lythronaxargestes (talk &#124; contribs) 21:42, 17 November 2019 (UTC)
 * Hmm... this is actually what I based the skull on. I wonder if I used keratin too liberally, and the neck muscles definitely look a bit funky. I'll go back and take a look at these things. --Slate Weasel (talk | contribs) 23:04, 17 November 2019 (UTC)
 * I've modified the skull shape and neck musculature. How does this look now? --Slate Weasel (talk | contribs) 23:48, 18 November 2019 (UTC)
 * Looks better, I wonder if the curvature lacrimals and nasal ridges will be even more "downscaled" by future studies. FunkMonk (talk) 15:36, 24 November 2019 (UTC)

November Part 4
It's time for the fuzzy theropods! Here's a Nqwebasaurus for day 16. Comments? --Slate Weasel (talk | contribs) 21:42, 16 November 2019 (UTC)
 * Looks good. I think it would be good to have that image in the taxobox, the current reconstruction seems a bit off proportionally... Lythronaxargestes (talk &#124; contribs) 01:36, 17 November 2019 (UTC)
 * If stuff is genuinely off about it go ahead, its old, a quick sketch, and made before the redescription. IJReid { {T - C - D - R} } 02:41, 17 November 2019 (UTC)
 * Oh, it's yours! I didn't realize that. I do wonder how well the skeletal reconstruction in the original description holds up - I figure many of these are probably more schematic than rigorous... I'll check when I get the time (although if there are discrepancies it would be difficult to incorporate the correct proportions without veering into OR territory). Lythronaxargestes (talk &#124; contribs) 03:20, 17 November 2019 (UTC)
 * The limbs of my silhouette seem okay based on the original measurements, but it would be nice to get a confirmation about that - which reminds me that I've gotta work on Tazoudasaurus some more. --Slate Weasel (talk | contribs) 19:22, 17 November 2019 (UTC)


 * Oviraptor for day 17, that little theropod whose diet remains perplexing. Comments? (I doubt that it would never eat eggs, even if that's not what its primary food source was.) --Slate Weasel (talk | contribs) 19:22, 17 November 2019 (UTC)
 * Much better than the one in the article. FunkMonk (talk) 14:45, 23 November 2019 (UTC)


 * Aurornis has appeared for day 18. How did I do on the feathering on this one? I worry that it looks too unnatural. --Slate Weasel (talk | contribs) 12:58, 18 November 2019 (UTC)
 * On the contrary, it looks very natural to me. Lythronaxargestes (talk &#124; contribs) 20:31, 18 November 2019 (UTC)


 * Timurlengia for day 19. Comments? --Slate Weasel (talk | contribs) 00:35, 19 November 2019 (UTC)
 * I don't know if it's just me but the torso looks very short. Maybe buff up the caudofemoralis? Lythronaxargestes (talk &#124; contribs) 06:41, 19 November 2019 (UTC)
 * I think that I should probably modify it after Suskityrannus for some proportions, including the torso. I'll upload a new version soon. --Slate Weasel (talk | contribs) 00:04, 20 November 2019 (UTC)
 * I've done the modifications. Comments? --Slate Weasel (talk | contribs) 00:11, 20 November 2019 (UTC)
 * Looks better. Lythronaxargestes (talk &#124; contribs) 03:48, 21 November 2019 (UTC)


 * Nemegtonykus for 20. Comments? --Slate Weasel (talk | contribs) 00:04, 20 November 2019 (UTC)
 * For some reason the darker background leg looks like it's bigger than the closer one? I also don't think the feet could be that far apart without one foot tip toeing somewhat (instead of both soles being flat on the ground). FunkMonk (talk) 14:42, 23 November 2019 (UTC)
 * I think that it may be the posture (for the size issues). Would a more vertical angle for the femora be better? --Slate Weasel (talk | contribs) 21:34, 23 November 2019 (UTC)
 * I think the darker hind leg might create the illusion of being larger because the yellow is so light that it almost blend into the white. I think the hind tarsometatarsus should be straighter, yeah. That is the alternate to bending the toes. FunkMonk (talk) 15:35, 24 November 2019 (UTC)
 * I've darkened it a bit and reposed the legs. How does this look? --Slate Weasel (talk | contribs) 17:53, 24 November 2019 (UTC)
 * Heh, now it looks like it would tip forwards. Perhaps rotate the front leg a bit more forward? FunkMonk (talk) 23:12, 24 November 2019 (UTC)
 * Done! --Slate Weasel (talk | contribs) 00:05, 25 November 2019 (UTC)
 * Looks more natural I think. FunkMonk (talk) 08:43, 25 November 2019 (UTC)

November Part 5
Last week I realized that I never drew a leptoceratopsid, so here's Leptoceratops for day 21! Leptoceratops gracilis, meaning gracile slender horned face, was a robust, chunky creature without horns... it seems like Brown was unaware of most of its anatomy at the time. Comments? Should I just hide the speculative quills? Oh, and expect an updated Miragaia this coming weekend. --Slate Weasel (talk | contribs) 01:21, 21 November 2019 (UTC)
 * Regarding the quills: For the purposes of building an encyclopedia, I think that the conservative stance should be taken as much as is practical—especially in more diagrammatic depictions such as these. However, as a level 2 inference (in phylogenetic bracketing terms), the quills aren't terribly speculative either. IMO leaving the quills off is the better choice, but there's nothing objectionable about leaving them on. Ornithopsis (talk) 01:41, 21 November 2019 (UTC)


 * Here's a Tylocephale for day 22. Comments? --Slate Weasel (talk | contribs) 00:08, 22 November 2019 (UTC)
 * Gargoyleosaurus has arrived for day 23. Comments? --Slate Weasel (talk | contribs) 14:26, 23 November 2019 (UTC)
 * So far these all look good, and I like ankylosaurs getting some love (though I would never do it myself) IJReid { {T - C - D - R} } 19:21, 23 November 2019 (UTC)
 * Haha, thyreophorans do take quite awhile! --Slate Weasel (talk | contribs) 17:44, 24 November 2019 (UTC)


 * Hesperosaurus enters a threat display for day 24. Comments? It's significantly smaller than Paul's estimate, but both the GAT and Carpenter skeletals suggest a length of ~5m (size discrepency strikes again!). Also, here's that updated Miragaia size comparison. Comments? And oh boy, it's huge. --Slate Weasel (talk | contribs) 17:44, 24 November 2019 (UTC)
 * Considering Hesperosaurus is a probably dacentrurine in Raven & Maidment 2017 and the new Miragaia paper, it might be better to have a more neutral silhouette instead of one based on Sophie. IJReid { {T - C - D - R} } 18:49, 24 November 2019 (UTC)
 * Whoa, I was totally not expecting that! I'm pretty far behind on stegosaur phylogeny apparently. Fortunately, I just made a new Miragaia silhouette. What should I change? It looks like most of the plates, spikes, vertebrae, and skull are known, so should I just swap out the limbs? --Slate Weasel (talk | contribs) 18:58, 24 November 2019 (UTC)
 * The forelimb-hindlimb difference should be decreased yeah so the tail and back are about halfway between the curve it is right now and the curve in Miragaia. The skull should also be using the elongate reconstruction, not the rounder skull. I think thats about it. IJReid { {T - C - D - R} } 19:08, 24 November 2019 (UTC)
 * Done! I suppose that Dacentrurus and Alcovasaurus are also in need of updates after this. I'll get to them... eventually. Also, does anyone know of a Wuerhosaurus skeletal? Again, something that I plan to do... eventually. --Slate Weasel (talk | contribs) 19:48, 24 November 2019 (UTC)
 * Oops, I forgot to change the curve of the back. That will come soon (I hope). --Slate Weasel (talk | contribs) 22:57, 24 November 2019 (UTC)
 * Okay, the back's been fixed now. Is this what it should look like? I also darkened the plates on the other side of the stegosaur to match its limbs. --Slate Weasel (talk | contribs) 23:57, 24 November 2019 (UTC)
 * Wuerhosaurus is a hellhole I fell into. I have made a skeletal on it, but it is not fit for use anywhere so I haven't put it anywhere. Using ordosensis I made a reasonable torso, but the supposed lateral view of the ilium is really dorsolateral and gave it a massive pelvis so the proportions look wayyyy off. But Hesperosaurus looks good. IJReid { {T - C - D - R} } 02:41, 25 November 2019 (UTC)


 * Oryctodromeus for day 25. Comments? --Slate Weasel (talk | contribs) 01:37, 25 November 2019 (UTC)

Yurgovuchia Skeleton Reconstruction
I did an updated skeletal diagram of Yurgovuchia in order to replace the old one, some error spotted or issues? PaleoNeolitic (talk) 00:22, 22 November 2019 (UTC)
 * What was wrong with the original one? It was from the published paper, and therefore more verifiable. FunkMonk (talk) 14:11, 22 November 2019 (UTC)
 * Two things, the text is irrelevant and should be cut, and now we have three skeletals to chose from. Paleocolour's is more accurate to the original, but adjusted to be more accurate, but there may be flaws with it too. IJReid { {T - C - D - R} } 15:58, 22 November 2019 (UTC)
 * For instance, almost all vertebrae are depicted with relatively similar size, this is indeed not accurate as the same paper gives the lateral length of each vertebrae (even comparisons). Vertebrae F and G have different proportions, in the original skeletal they were depicted with a similar size (if not the same). The pubis is depicted without a, let's say, speculative pelvis, making its visualization and virtualization very confuse. The partial cervical neural arches were depicted with a cord and point like shape, and again, these vertebrae have other proportions. PaleoNeolitic (talk) 22:15, 22 November 2019 (UTC)
 * In this case then I support the new skeletal, and the old ones should probably be tagged as inaccurate. IJReid { {T - C - D - R} } 15:47, 26 November 2019 (UTC)

Minor issues
So, with the Eolambia recon under review right now, I decided to do a complete check out of all our hadrosaur reconstructions, and... it's bad. It's very bad. The most common issues surround the feet; the amount of soft tissue padding varies from nearly lacking it altogether, to the artist seemingly guessing what shape they should draw the foot... some of them are blocky triangles. A lot of them are also walking on the tips of their toes, whereas they should be walking on the whole of their toes. Hands are a common issue, too; some have outright separate fingers whereas others just have generally deformed hands. Others have misshapen skulls and a number of individual oddities. One thing I forgot to take note of in the captions is that many of them feature full pronation, which is impossible. Many are very shrink-wrapped but I refrained from mentioning this since the line of "too shrink-wrapped" is very subjective. There's probably a number of finer-anatomy and proportion things I wouldn't pick up (Hartman changed something about how he reconstructed the pectoral girdle on them recently and that had a knock-on effect; these should be checked against his changes ), but what I've noted is largely grave issues. Some of these might be easy fixes, but at least a fair amount are inaccurate in very fundamental ways and may be better thrown out. In the meantime all should be removed from their pages unless anyone has defenses for any of the above being fine.  Luso titan  (Talk | Contributions) 22:17, 4 May 2019 (UTC)
 * This is an issue even in professional palaeoart, and I have never gotten a straight answer as to how the hands should look, and it is inconsistent everywhere as a result. The fingers, except for the "pinky", should never be free, but joined. However, apart form just being somewhat horseshoe shaped, based on tracks, we don't seem to know much about how they would have looked in life, hence the inconsistency. Many have interpreted the various mummies as showing the hands encased entirely in skin. But even then, some artists draw three external hooves poking out, even in the recent "official" Brachylophosaurus illustrations based on the Leonardo specimen. However, since the weight bearing fingers are digits 2, 3, and 4 (digit 1, the thumb, was lost entirely), it would seem odd that digit 4 would have a claw, when this (and the fifth claw) was lost in pretty much all other dinosaurs it seems. So personally I would never draw these hooves, but the problem is they are drawn in a lot of professional, museum level paleoart, so we have no valid reason to remove such images, because we don't know whether it is actually in error. FunkMonk (talk) 22:35, 4 May 2019 (UTC)
 * Yes, which is why I never mentioned the unguals. I mentioned pronation, separated fingers, in one case a missing digit five, and in some cases the whole hand being a weird shape. Also, most of them had the feet as the primary issues, not the hands, among a number of other problems.  Luso titan  (Talk | Contributions) 22:39, 4 May 2019 (UTC)
 * On the tip toeing, that is normal part of any walk cycle (when a foot pushes off), so should only be a problem in animals that appear to stand still. Anyway, most of this could be fixed pretty easily. It will be a waste of time removing al the images just to add them again in a week or whatever it would take. FunkMonk (talk) 22:41, 4 May 2019 (UTC)
 * Some of these need entire re-drawings for a fair mount of the animal, so I'm doubtful. Regardless, are you willing to fix them all in a short timeframe? If not then they will be going very shortly.  Luso titan  (Talk | Contributions) 00:49, 5 May 2019 (UTC)
 * I think it may be useful to separate them into major issues vs minor, with stuff like feet or uncertain hands or potentially too long necks being rather minor. The minor ones at least can be kept for the time being, and the major ones either edited promptly or removed from articles. I am rather disappointed with just how many restorations are off, but at least for most its just the constantly-changing foot anatomy. Feel free to correct my listing of you feel the need. IJReid { {T - C - D - R} } 02:07, 5 May 2019 (UTC)
 * Moved a few around based on ease of fixing, otherwise looks in order.  Luso titan  (Talk | Contributions) 02:14, 5 May 2019 (UTC)
 * Tried checking cross-referencing finer details with Hartman skeletals, the Maiasaura has something wrong with the limb proportions, the juvenile definitely needs longer arms, and the tail on the adult needs angling downwards; moving to major issues since the whole of the animal is probably effect. The tails of E. regalis, Olorotitan, and Koshisaurus also seem affected, but to a lesser extent. Didn't check for it in Major Issues but the rest of the Minor seem okay at a glance. Huehuecanauhtlus seems all kinds of broken, if I try to picture what this animal would look like it doesn't work at all.  Luso titan  (Talk | Contributions) 02:31, 5 May 2019 (UTC)
 * More Hartman work, this time Hypacrosaurus, the cervicals aren't the only vertebra with misshapen neural spines, it's almost the entire column of them. The core of the tail is angled way up in the outdated fashion, but I missed it at first since somehow the neural spines curve strongly downwards at the same time. The ones of the front of the body form an obvious high point before dropping off over the hip. Neither of these conditions are correct at all, the back sail is very fairly straight and the tail... doesn't do whatever that is. And no, neither of these seem to be due to the specific difference of the skeletal and art. Moving to major since the entire tail and back need help.  Luso titan  (Talk | Contributions) 02:46, 5 May 2019 (UTC)
 * Found a GSP skeletal showing a large back hump in H. altispinus so it might be a legitimate specific difference and so it's off the hook for that. The tail still needs a complete re-do.  Luso titan  (Talk | Contributions) 02:57, 5 May 2019 (UTC)


 * This whole thing reminds me that I've got to update most of my hadrosaurid size comparisons. For the giant ornithopod one, I just realized that Charonosaurus' ankle is bending backwards (ouch)! The feet of all my older hadrosaurs are pretty misshapen too. --Slate Weasel (talk | contribs) 14:57, 5 May 2019 (UTC)
 * The Tom Parker Parasaurolophus does have a pinky, look close, it is just parallel wit the outline of the right hand. I still don't see any reason to have "tip-toeing" listed as an error in these images, unless an animal is standing still. We have looked at some of Hartman's skeletals, and they are all "tip-toeing" too. Also, I don't agree there are any "giant cervical neural spines" shown in these images, it is just the skin flap above the neck which is known form the Trachodon mummy and the Corythosaurus type specimen, with a frill over it. FunkMonk (talk) 05:07, 6 May 2019 (UTC)
 * Pinging, who has just written a lot about hadrosaur integument. FunkMonk (talk) 06:04, 6 May 2019 (UTC)
 * I agree, and yes, the neck was probably quite deep due to a deep ridge of soft tissue above the vertebrae, see Czerkas, 1997. --Jens Lallensack (talk) 12:40, 6 May 2019 (UTC)
 * In most of them it is soft tissue, but a few shows what are obviously the neural spines due to extreme shrink-wrapping. In these, there are definitely cervical neural spines. Regarding the foot position, fair enough I guess, but there's not single one up there for solely that reason so it doesn't get anything off the hook.  Luso titan  (Talk | Contributions) 19:19, 6 May 2019 (UTC)
 * Which ones "obviously" show this? I don't see it in a single one, so it's definitely up to interpretation. I see folded skin (which might give the impression of underlying bones), but that's about it. FunkMonk (talk) 06:17, 13 May 2019 (UTC)
 * Hypacrosaurus and Amurosaurus. I don't see why that would be interpreted as skin, the skeletals are shrink-wrapped to begin with and they're placed perfectly to be the neural spines. Why assume the skin just happens to indent in a bizarre manner in just the perfect fashion to resemble shrink-wrapping? Both regardless have totally broken underlying anatomy regardless, so it's a moot enough point.  Luso titan  (Talk | Contributions) 20:44, 13 May 2019 (UTC)

Realized I forgot Mukawaryu in the initial sweep, threw it in minor issues. Hard to be wrong when he don't know much about the animal, but the pronated hands are a no. Tail might be raised too high per Hartman but I'm not quite sure so that could probably pass through as is.  Luso titan  (Talk | Contributions) 01:18, 7 May 2019 (UTC)
 * How do you know the hand is pronated? Shouldn't be possible to see in the live animal like this, hadrosaurs didn't pronate their wrists, but the palms almost faced backwards (see figs 5 and 6). FunkMonk (talk) 05:51, 13 May 2019 (UTC)
 * The idea they faced backwards is outdated, they could only achieve around a fourty-five degree angle. If it was an invisible a difference as you claim Scott Hartman would not have gone back and changed its in every single one of his hadrosaur skeletals recently.  Luso titan  (Talk | Contributions) 20:44, 13 May 2019 (UTC)
 * Look at the footprints, they don't lie, and that paper is the latest word on the issue. No one said they faced entirely backwards, but almost backwards, as both articulated skeletons and footprints show, this was achieved without pronation. Also, as for the large, oddly shaped back scales, that's almost exactly how they're shaped in illustrated based on the Leonardo specimen: FunkMonk (talk) 10:32, 15 May 2019 (UTC)
 * Hartman is the latest word, he's a reliable source. Regarding the scales, I looked into the literature and it turns out that one way S. osborni is distinguished relative to S. angustirostris is that according to known skin impressions it didn't even have dorsal frill scales .  Luso titan  (Talk | Contributions) 02:33, 20 May 2019 (UTC)
 * A blog is not published research, per basic Wikipedia policy. In any case, Hartman's skeletals do not contradict Senter's paper, who, by the way, is one of the main authorities on dinosaur biomechanics, and I'm pretty sure Hartman is actually basing his poses on those advocated in the Senter paper. As Hartman says "Both articulated specimens and hadrosaur trackways show that the ‘palms’ faced more inward (somewhere around 45 degrees) rather than facing backwards". Which is basically what Senter says. FunkMonk (talk) 22:46, 26 May 2019 (UTC)

Removed all instances of the major issues ones on English Wikipedia; all the minor issue ones appear to have been sufficiently fixed. This section should be good to archive now.  Luso titan  (Talk | Contributions) 17:15, 14 October 2019 (UTC)
 * Seems all we thought we knew about hadrosaur hands was wrong, and all our restorations are inaccurate: In short, the mummified hand of the Edmontosaurus annectens Dakota shows there were only two hooves, one large (and almost horse-like) on the second digit, one small on the third, and none on the fourth. FunkMonk (talk) 15:57, 17 October 2019 (UTC)
 * It seems to me that the only surprise from Dakota is how much larger the digit III hoof is than the digit II hoof, and even that's not terribly surprising given the shapes of the unguals. That said, most of the artwork here appears to lack front hooves entirely (what's the deal with that?), though it's hard to tell given the low detail level of most of the art. Ornithopsis (talk) 16:17, 17 October 2019 (UTC)
 * Well, the surprise is that either hadrosaurs are depicted with three hooves (not sure why) or no hooves at all (based on the old Trachodon mummy), and this shows neither is correct. Perhaps the old mummy simply wasn't well-preserved enough to show the hooves, indicating there was just a "mitten". But the only artist I can think of who only drew two hooves before was Bob Bakker, who insisted that no archosaurs had more than three claws on the first three digits. People like Gregory S. Paul drew no hooves at all. FunkMonk (talk) 16:27, 17 October 2019 (UTC)
 * Huh, you appear to be correct. I've never looked at hadrosaur art that closely to notice that pattern; I've always been under the impression that they had two hooves—which, if you look at the fossils, seems like it ought to be the obvious interpretation. The fossils have two unguals, with the digit III ungual being obviously larger than the digit II ungual—I'm not sure how the other two interpretations dominated. Besides Bob Bakker, the original Walking With Dinosaurs, Saurian, and Todd Marshall all have seemingly correctly depicted Edmontosaurus with two front hooves, and I know I've seen paleontologists state hadrosaurs had claws/hooves (e.g. Dave Hone ). Apparently I was just out of the loop on what the mainstream idea of hadrosaur hands looked like, and somehow my out-of-the-loop understanding proved to be correct? Huh. Ornithopsis (talk) 17:11, 17 October 2019 (UTC)
 * I didn't know the WWD Edmontosaurus had two as well, but looking it up, it seems they just reused their Iguanodon models, it even has thumb-spikes (therefore three claws)! FunkMonk (talk) 17:17, 17 October 2019 (UTC)
 * You could technically write it off as "the ungual is just bigger" and be technically correct, but the issue is how much bigger it is now - much bigger. The external sheath is so big it covers over digit four, too. Also, the one on the second digit is a markedly different shape, which I can't say I've seen depicted in the past.  Luso titan  (Talk | Contributions) 02:23, 18 October 2019 (UTC)
 * I actually don't think the size or shape difference is quite as dramatic as it looks. Look at figure 10K and 10L of . In 10K the digit II ungual appears smaller and more pointed than the digit III ungual, much as in Dakota, but in 10L it's apparent that we're seeing the ungual edge-on. I think the same is probably true of Dakota, it's just not apparent in the views we're seeing. Something to take into account when revising the art. The figures posted by NDGS indicate that the hoof on digit III is mostly associated with III and does not seem to overlap too much of IV. Ornithopsis (talk) 04:16, 18 October 2019 (UTC)
 * I did an attempt at modifying our only "modern" E. annectens restoration accordingly, any thoughts? Anyone else is of course welcome to modify further, luckily only one hand is visible, so it's easy. It seems even the AMNH mummy didn't preserve the integument of digit 2, so we had no idea it would be this spike-like. I wonder what happened to its digit 3, maybe the skin was just displaced (as much of the rest was elsewhere on the body). FunkMonk (talk) 10:13, 19 October 2019 (UTC)
 * As I said, digit II isn't spike-like, it's hoof-like but viewed edge-on in the photos of Dakota (as indicated by the specimen in the paper I linked earlier, and NDGS actually confirmed my interpretation on twitter). As this Edmontosaurus reconstruction is in more or less the same angle as Dakota, that's not a huge issue here, but it would be a mistake if depicted as spike-like from an anteromedial view. Also, I reiterate, the digit III hoof does not cover all of digit IV; digit IV still extends somewhat lateral to the hoof . Finally, I think that digit III would be more extended than it is on Dakota while it's bearing weight (a la a horse ) and that as such the digit II hoof would be lowered closer to the ground, but that's more of a general impression than anything. Ornithopsis (talk) 16:49, 19 October 2019 (UTC)

Replacement images
Getting back into digital art once again, I've done a quick Shantungosaurus replacement, if it is accurate enough. Colours and patterns etc are easily adjusted it need be. Comments or critiques? IJReid { {T - C - D - R} } 18:30, 5 May 2019 (UTC)
 * There is something off with the leg pose, seems like it would be tipping to its right side (the hind legs seem to be too close to each other). And why is the frill row incomplete? Speaking of hradrosaur images, Nobu Tamura has some new free ones up, the legs look a bit wonky, but I can fix them: FunkMonk (talk) 05:06, 6 May 2019 (UTC)
 * I'd guess that the incomplete feature scale row is based on Edmontosaurus:, although it seems like it still isn't complete enough here. --Slate Weasel (talk | contribs) 11:39, 6 May 2019 (UTC)
 * I havn't got time to properly check so I'm not 100% confident but I'd say the lower jaw could be a bit deeper? As far as I known there is no complete skull, maybe have a look at these Steveoc 86 (talk) 18:31, 9 May 2019 (UTC)
 * I took the lower jaw and overall skull anatomy from the Edmontosaurus and Shantungosaurus comparative anatomy paper. The skull in the model lacks a predentary, and the premaxillae are incorrectly articulated making them appear too straight out and when articulated properly they end up in the downward shape in Edmontosaurus. I'm not totally sure if the feature scale row has to be exactly like Edmontosaurus or not, I made it a bit different intentionally. And I will be able to fix the "tipping" look soon by repositioning the far leg. IJReid { {T - C - D - R} } 23:01, 9 May 2019 (UTC)
 * Why would we assume the frill row was incomplete? FunkMonk (talk) 05:48, 13 May 2019 (UTC)
 * I fixed the far leg as I see, added shading, and completed the feature scale row as much as I plan to (I'm trying to avoid copying Edmonto completely). IJReid { {T - C - D - R} } 01:58, 15 May 2019 (UTC)

Ceratopsidae Size Comparison


As requested by, I have started work on Ceratopsidae. I recently uploaded a new Pentaceratops. Any comments so far? --Slate Weasel (talk | contribs) 21:50, 17 March 2019 (UTC)
 * Perhaps we could get one of Achelousaurus too? I'm not sure the current image is really sufficient... FunkMonk (talk) 19:07, 18 March 2019 (UTC)
 * Yeah, it looks like a crude Achelousaurus skeletal was created here (and there are Chasmosaurus skeletals, too):, so I certainly can do it. It also looks like the postcranium of Pentaceratops is merely a clone from Utahceratops, not Titanoceratops. Anyways, here's an Avaceratops. Should I sneak in the adult estimate? --Slate Weasel (talk | contribs) 23:53, 18 March 2019 (UTC)
 * Pachyrhinosaurus done. I might duplicate some silhouettes and swap some heads later on to include all three species. Comments? --Slate Weasel (talk | contribs) 22:03, 20 March 2019 (UTC)


 * I found GSP's Chasmosaurus russelli skeletal here: . C. belli skeletals are hard to come by online, and seem mostly to just be GSP's C. russelli with the wrong label slapped on it, or a skull on the postcranium of Kosmoceratops, Pentaceratops, or something else. However, I did find a GetAwayTrike skeletal: . Is it okay proportionally to use as a reference? --Slate Weasel (talk | contribs) 23:08, 21 March 2019 (UTC)
 * Since no one's commented, I'll proceed with these skeletals, use C. belli for the big chart, and put an Eotriceratops head on the body of a Trike. I also have a brachiosaurid size comparison somewhere if anyone wants it. --Slate Weasel (talk | contribs) 21:28, 25 March 2019 (UTC)
 * Considering Brachiosauridae has very uncertain inclusion, i'd hold off on it for now. IJReid { {T - C - D - R} } 01:30, 26 March 2019 (UTC)
 * Yeah, if no one comments, it is usually because they see no issues, or don't know enough to comment... Any news on the Achelous? FunkMonk (talk) 08:42, 26 March 2019 (UTC)
 * Finished the big chart! Achelousaurus should be pretty simple to make, I'll get started now. --Slate Weasel (talk | contribs) 13:46, 26 March 2019 (UTC)
 * I finished Achelousaurus, . --Slate Weasel (talk | contribs) 14:22, 26 March 2019 (UTC)
 * Thanks, I'll try to fit in in the article... FunkMonk (talk) 14:26, 26 March 2019 (UTC)
 * In what length do you put Triceratops (8 m / 8.5 m / 9 m ?) and Eotriceratops (8 m / 8.5 m / 9 m)?  M ath K night  19:31, 26 March 2019 (UTC)
 * I would advise Avaceratops be removed from the group chart as it does not represent an adult and the rest do.  Luso titan  (Talk | Contributions) 19:53, 26 March 2019 (UTC)
 * Makes sense, I'll probably substitute it w/ Nasutoceratops, as it is glaringly missing from the chart. Triceratops is 8 meters long when fully extended, Eotriceratops 8.5 (following Paul, 2016, which I should probably add to the description of the file). --Slate Weasel (talk | contribs) 19:57, 26 March 2019 (UTC)
 * OK, though I think the biggest Triceratops was longer than 8 meters. If you can, please change the color of Triceratops to green, and Chasmosaurus to red, because the red of Triceratops is hard to differentiate from the orange of Eotriceratops. I also suggest more spacing and making the big four on the left more transparent.  M ath K night  14:35, 27 March 2019 (UTC) I also suggest pushing the legend upwards and maybe add the length after each species name (e.g. Triceratops horridus – 8 m).  M ath K night   15:21, 27 March 2019 (UTC)
 * Well, 8 meters seems to be the average size for the Trike, so that's why it is here. I've changed the colors and opacity, and shuffled the taxa around. I think that listing the length estimates after the species name is generally depreciated. --Slate Weasel (talk | contribs) 23:01, 27 March 2019 (UTC)
 * "Seems to" based on what? Blind guessing? Your anecdotal rough impression? Since when do we use "averages" for these anyways? The point of the size diagram is showing how big it could get. If some are the biggest known and some are "what seems to be the average" you're showing a misleading comparison. The Triceratops should be upped in size to match the Eotriceratops.  Luso titan  (Talk | Contributions) 02:47, 28 March 2019 (UTC)
 * I found a T. "maximus" skeletal by GetAwayTrike that I can use to scale the Trike with to result in a bigger size: . --Slate Weasel (talk | contribs) 12:04, 28 March 2019 (UTC)
 * Just a note regarding Triceratops ontogeny; Juvenille triceratops horns curl backwards, at some point in development they start to straighen like you see in the specimen that Hartman has restored and then they start to point forward. Considering you'll be using a large specimen I'd recomend GAT's/or a specimen with forward pointing horns. Steveoc 86 (talk) 12:56, 28 March 2019 (UTC)
 * That looks better, I like how you positioned Centrosaurines vs Chasmosaurines with man in the middle.  M ath K night  17:10, 28 March 2019 (UTC)
 * If I remember correctly, ceratopsians have flexed forelimb posture and I'm not sure if they could fully straighten. It might be that Pachyrhinosaurus, Eotriceratops, and Triceratops forelimbs are too straight? Steveoc 86 (talk) 23:24, 27 March 2019 (UTC)
 * I am wondering about this too. The front limbs do see a bit too straight compared to how they are usually restored. I have added the Achelousaurus diagram to the article, by the way. FunkMonk (talk) 19:43, 31 March 2019 (UTC)


 * I have create a Kosmoceratops size comparison. Something about it feels off. Comments? --Slate Weasel (talk | contribs) 15:11, 2 May 2019 (UTC)
 * Not sure why, but it seems like the head is proportionally smaller than in the plos skeletal? FunkMonk (talk) 21:05, 29 June 2019 (UTC)
 * Fixed. --Slate Weasel (talk | contribs) 14:52, 7 July 2019 (UTC)


 * I've flexed the elbows of Pachyrhinosaurus and Avaceratops. I'll add other species to Pachyrhinosaurus later, so feel free to archive this section unless anything else is wrong. --Slate Weasel (talk | contribs) 12:58, 5 December 2019 (UTC)

Dryosaurus Size Comparison
I dug up this old size comparison and fixed it up a bit before uploading it. Comments? Should I add D. altus? --Slate Weasel (talk | contribs) 14:46, 3 May 2019 (UTC)
 * I would add D. altus, yes.  Luso titan  (Talk | Contributions) 17:10, 3 May 2019 (UTC)
 * How different would D. altus be from D. elderae externally? --Slate Weasel (talk | contribs) 22:18, 3 May 2019 (UTC)

Pellegrinisaurus Skeletal
All the neccessary data can be found in the file description. It measures ~17 meters long here, as opposed to the higher estimates of 20-25 meters. Comments/Questions/Reccomendations? --Slate Weasel (talk | contribs) 18:09, 28 August 2019 (UTC)
 * I'm pretty sure Pellegrini preserves some partial dorsal vertebrae as well. Why are the caudals mostly grey, I thought that colour was used when they aren't figured in the views necessary, while these caudals are all shown in lateral view . In addition, I might be wrong but more figures of the material may be present in Powell 2003 (his thesis published ) IJReid { {T - C - D - R} } 16:14, 1 September 2019 (UTC)
 * The coloration of the caudals do appear to be a random error on my part - I'll fix that soon. I've explained in the file description why I omitted the dorsals, although I just discovered that plate 72 shows at least 6 additional dorsals:, and S4-6 are also apparently known from P. powelli. I don't know if the sacrals are shown in pl. 72, but it looks like the dorsal vertebrae are nearly in lateral view, so they should suffice as adequate reference material. I'll have to update this when I get the chance. --Slate Weasel (talk | contribs) 21:41, 2 September 2019 (UTC)
 * I now think that the extra dorsals may actually be caudals - I lack the expertise to tell. The four centra don't seem to all be consecutive, and their lengths apparently do vary a bit, but I haven't found what these measurements are. The dorsal illustrated in the description seems to be either -3/4/5, but I don't know which one. S4-6 are poorly preserved and never figured well enough, if at all (I can't tell if they're in the plates), to be included. Here's a link to the information in Powell (2003): . I have some other projects that I'm working on, so I'll put this on hold and see if anything clarifying this situation turns up. --Slate Weasel (talk | contribs) 23:07, 3 October 2019 (UTC)
 * If by "extra dorsals" you mean the vertebrae from Plate 72 of Powell, those are definitely dorsal vertebrae, not caudals. Ornithopsis (talk) 21:00, 14 October 2019 (UTC)

Carcharodontosauria / Carcharodontosauridae size comparison
Scale diagram representing the most complete genera. Neovenator has been recovered as a Carcharodontosaurid, but certainly as a Carcharodontosaurian, and is one of the most complete known. Eotyrannu5 (talk) 16:27, 30 August 2019 (UTC)
 * Looks pretty nice, my old carcharodontosaurid size comparison certainly was quite dated. I'd recommend adding Tyrannotitan, as it's pretty complete. Also, could you provide a list of references in the file description? --Slate Weasel (talk | contribs) 20:31, 8 September 2019 (UTC)

Some oviraptorids
These three images haven't been reviewed yet and they all seem to have problems.Kiwi Rex (talk) 13:13, 31 August 2019 (UTC)


 * Agree, the Gigantoraptor also needs to have primary feathers attaching to its second finger. I might be able to fix some of the one day. I think the size diagram needs to be completely redone, though. FunkMonk (talk) 13:40, 31 August 2019 (UTC)

Liliensternus
This image was recently put in the Liliensternus page, but it is definitely anatomically inaccurate in almost every single detail. The arms are too thin, the tail is too short, the torso is too robust, the neck is wrong, and the head is too vaguely shaped. Greg Paul has a skeletal reconstruction in his Field Guide. Kiwi Rex (talk) 19:23, 30 September 2019 (UTC)
 * Yes, it could be fixed through some heavy editing, but it's really not worth it since we already have other, better images. But with other inaccurate images, it should be tagged as such on Commons so others won't add it later on. FunkMonk (talk) 19:26, 30 September 2019 (UTC)
 * I believe the vaguely shaped head is due to it being incomplete. It was considered related to either dilophosaurus & coelophysis at some point. Hence the speculative crest on some restorations. Definitely right on the money with the rest, shame I didn't catch on to them when I was editing the image. The comically short tail is especially egregious on my end, my apologies. Monsieur X (talk) 23:21, 30 September 2019 (UTC)

Mapusaurus
I have two things to say about this genus:
 * 1) I've updated my size comparison. It's visible further up this page and on the article. Any comments?
 * 2) This restoration replaced the old NT one. The perspective on the head seems a bit odd, but one real problem is that it suffers from the far foot being positioned lower than the near foot. The ground is visible here, so this really is a problem. I've haven't yet checked its proportions in any detail. Anyone want to try and fix this? --Slate Weasel (talk | contribs) 12:36, 2 November 2019 (UTC)
 * I think the presence of two prominent crests is also wrong. IJReid { {T - C - D - R} } 16:42, 2 November 2019 (UTC)


 * The head looks pretty wonky, I don't think the old one should be replaced. FunkMonk (talk) 09:02, 4 November 2019 (UTC)

Wessex Formation dinosaurs
This image pretty much fits the textbook definition of shrinkwrapping, particularly on the Iguanodon. Is this fixable with image editing? Hemiauchenia (talk) 22:28, 7 November 2019 (UTC)
 * Only needs some smoothing out. FunkMonk (talk) 23:15, 7 November 2019 (UTC)
 * Perhaps wants to give it a go? FunkMonk (talk) 16:47, 14 November 2019 (UTC)
 * Computer is still busted, so I sadly can not. Ironically, I was actually editing this image the day before my PC died. Anyway, the Eotyrannus, Ornithomimosaurs (Thecocoelurus?) & the Hypsilophodon might need more visible feathering as well. Monsieur X (talk) 17:08, 14 November 2019 (UTC)
 * Sounds good, you think the file can be retrieved? Note that the "Neovenator" was originally Concavenator for some reason, but I painted the dorsal sail thing out... That area on the back is overly sharp because of that, I forgot to add blur. FunkMonk (talk) 22:43, 14 November 2019 (UTC)
 * The environment of the Wessex Formation is also supposed to be semi-arid to Mediterranean climate, given the presence of calcrete. Mark Witton compares it to Chaparral, though I'm not sure how accurate that comparison is, given the formation was deposited just before the explosive radiation of angiosperms during the Aptian-Albian interval .Hemiauchenia (talk) 23:00, 14 November 2019 (UTC)

Neovenator skull reconstruction
Neovenator skull reconstruction, based on other basal Carcharodontosaurs (Concavenator, Acrocanthosaurus) as well as Allosaurus. Material figured in "the osteology of Neovenator salerii", as well as 3D fossil scanned databases. Eotyrannu5-2 (talk) 21:32, 23 November 2019 (UTC)
 * Looks very clean and nicely done, and probably the first rigorous anterior view of a dinosaur skull we have outside that Tenontosaurus. I see no issues with it. IJReid { {T - C - D - R} } 00:39, 24 November 2019 (UTC)
 * Brilliant work, are you considering doing Eustreptospondylus or Proceratosaurus in the future? Hemiauchenia (talk) 17:31, 24 November 2019 (UTC)
 * As an additional comment, while the reconstruction is excellent, perhaps it would be good if a variant was made highlighting known material?Hemiauchenia (talk) 19:19, 24 November 2019 (UTC)
 * Agreed, especially since much of this is speculative. FunkMonk (talk) 16:23, 29 November 2019 (UTC)
 * I dont think it's too speculative considering the recent 3d reconstruction of the nearly complete skull of Concavenator. Which is probably worth redrawing and adding to commons Hemiauchenia (talk) 16:56, 29 November 2019 (UTC)

November Part 6
Alright, I've reached the home stretch! Here's a Diluvicursor for day 26. Comments? Soon there will be some hadrosaurs (which ones, I can't guarantee, but Brachylophosaurus is almost certainly going to be one of them) and another Australian ornithopod. --Slate Weasel (talk | contribs) 01:32, 26 November 2019 (UTC)
 * Kamuysaurus for day 27! I've given it the hand claw/hoof morphology of Edmontosaurus. Comments? --Slate Weasel (talk | contribs) 16:14, 27 November 2019 (UTC)
 * Diluvicursor (and Oryctodromeus) looks very large, I didnt know there were two specimens, and the Kamuysaurus looks leggy, but I'm not sure if thats because of genuine anatomy or not. IJReid { {T - C - D - R} }
 * Well, the thesis the Oryctodromeus size comparison is based on did give a length estimate of 3m, and Diluvicursor follows the paper (the larger specimen's a single caudal vert). Kamuysaurus' appearance as long-legged may partially be due to it having more extended arms here. --Slate Weasel (talk | contribs) 01:04, 28 November 2019 (UTC)
 * Given what we know about Neornithischian integument from Kulindradromeus, shouldn't Diluvicursor be depicted with integument given the polar climate?, I know that wasn't depicted in the press release art but it seems more parsimonious given the evidence Hemiauchenia (talk) 01:16, 28 November 2019 (UTC)
 * It's fuzzy now. It looks kind of shaggy, although I suppose that that's not a bad thing, looking at modern polar animals. --Slate Weasel (talk | contribs) 14:11, 28 November 2019 (UTC)


 * Brachylophosaurus attacks on day 28. Hadrosaurids are rarely shown fighting back against predators. Comments? Is the torso too shallow? --Slate Weasel (talk | contribs) 01:04, 28 November 2019 (UTC)
 * Maiasaura for day 29. Somehow this has never been attempted here before (I guess that hadrosaurs aren't as glamorous as theropods or sauropods, seeing as I was the first to do Corythosaurus, Hypacrosaurus, Gryposaurus, and Kritosaurus as well). Comments? --Slate Weasel (talk | contribs) 12:41, 29 November 2019 (UTC)
 * Both look good, but yes the Brachylophosaurus torso looks too shallow in the chest particularly. IJReid { {T - C - D - R} } 16:11, 29 November 2019 (UTC)


 * Muttaburrasaurus for day 30 (and some Brachylophosaurus updates)! Comments? I should work on ornithischians and basal sauropodomorphs some more, it seems, those categories are pretty sparse when compared to theropods and sauropods. --Slate Weasel (talk | contribs) 15:22, 30 November 2019 (UTC)
 * Both look good, and yeah I feel people simply like ornithischians less (there arent many non-sauropods to begin with). IJReid { {T - C - D - R} } 18:14, 30 November 2019 (UTC)

Dakotaraptor Skeletal Reconstruction
Recently, I did a skeletal restoration of the giant Dakotaraptor for its page. Every known material depicted here is accurately scaled, since most   skeletal reconstructions have wrong proportions; is there any problems? PaleoNeolitic (talk) 19:07, 29 November 2019 (UTC)
 * Does this take into account the furculae actually being turtle plasta?Hemiauchenia (talk) 19:12, 29 November 2019 (UTC)
 * Yep, there is no furcula depicted. PaleoNeolitic (talk) 19:44, 29 November 2019 (UTC)
 * I thought as much, I think that it should be included that you've acknowledged the paper in the image description Hemiauchenia (talk) 19:57, 29 November 2019 (UTC)

Rapator Skeletal Diagram
Not particularily glamorous, but here it is. The silhouette and scaling were done based on Australovenator, and it matches the estimate in Molina-Pérez & Larramendi theropod encyclopedia. This also is done with a simpler style similar to my Gallardosaurus. Additionally, I'm working on slighlty smoothing out the bones when I make skeletals. While they wouldn't be perfectly smooth, a some of the bumpiness is likely due to erosion and crushing in many cases. Comments? --Slate Weasel (talk | contribs) 16:30, 30 November 2019 (UTC)
 * Given that the single manual bone is almost invisble in thumb view, perhaps a zoomed in section on the hand should be added? Hemiauchenia (talk) 17:39, 30 November 2019 (UTC)
 * Something like this? --Slate Weasel (talk | contribs) 19:04, 30 November 2019 (UTC)
 * Yes, that looks good Hemiauchenia (talk) 22:09, 30 November 2019 (UTC)

Atacamatitan Skeleton Reconstruction
Here is a skeletal reconstruction that I recently did for the titanosaur Atacamatitan, in order to give more life to its page, which, I also expanded. Is there any problems with it? PaleoNeolitic (talk) 15:54, 1 December 2019 (UTC)
 * Theres really nothing too wrong with the skeletal, the main problems will arise when and/or if titanosaurs actually get solid phylogeny and it resolved closer to something more complete. When that time comes, it'll need fixes, but until then theres nothing wrong I can see. IJReid { {T - C - D - R} } 19:51, 1 December 2019 (UTC)
 * You might wanna change the head shape to something a little more Bonitasaura-ish, apparently that's closer to the default state of titanosaur skull shapes ^-^ --TKWTH (talk) 12:21, 2 December 2019 (UTC)
 * Quick question: Does the scale bar represent the axial length of the animal or is it just the distance between those two points on the grid? The second scale bar by the humerus is too small to easily read, and probably could be removed for simplicity. --Slate Weasel (talk | contribs) 12:53, 2 December 2019 (UTC)
 * You have the dorsal vertebrae backwards. The convex end of the centrum should face anteriorly. You also have their order reversed; the anteroposteriorly compressed one is a posterior dorsal and the anteroposteriorly elongate one is mid-posterior. Neither is an anterior dorsal. The bone you have depicted as a coracoid is actually a sternum. The humerus is much too short; the humerus-femur ratio in this image is 0.58 when in the vast majority of titanosaurs it is close to 0.80. As for the Bonitasaura skull issue: a Bonitasaura-like skull is most likely unique to some subset of colossosaurians; it is not the default for other titanosaurs. As it is unclear whether Atacamatitan is a colossosaur or not, I see no obvious harm in giving it a Bonitasaura-like skull, but I would personally recommend a Tapuiasaurus-like skull instead. Tapuiasaurus has the advantage of being known from a complete skull, unlike Bonitasaura, and it resembles the not-necessarily-related Rapetosaurus and Nemegtosaurus, and as such may represent the plesiomorphic condition for derived titanosaurs overall. I also think that a clearer font should be used for the name, but that's a minor aesthetic preference. Ornithopsis (talk) 18:28, 2 December 2019 (UTC)
 * A couple more concerns: you've got the scale wrong; Atacamatitan was about one-third bigger than this. I measure the femur on this skeletal at 79 cm; the femur of the fossil is 110 cm. Also, I think it's misleading to show the dark gray for the missing femoral head as it would be located medial to and thus obscured by the preserved greater trochanter in this view. The way you've depicted it makes it look like the greater trochanter is missing. Ornithopsis (talk) 18:38, 2 December 2019 (UTC)
 * And a couple more things: it looks like you've got a tibia:femur ratio of around 0.55 here; that's pretty short for anything but a saltasaurin. I'd advise making it a bit longer (probably a bit over 0.6 times the femur length, as is typical of non-saltasaurid titanosaurs). You've also got a radius:humerus ratio of around 0.9; all adult titanosaurs have a ratio below 0.65; this is a product of the short humerus rather than a problem with the radius relative to the hindlimb though. Ornithopsis (talk) 18:50, 2 December 2019 (UTC)
 * One more note: I would recommend having a one-meter scale bar. Easier to notice than a 10-cm scale bar on an animal of this size and less confusing than the 7.14-meter scale bar at top. Ornithopsis (talk) 20:09, 2 December 2019 (UTC)
 * What about now? PaleoNeolitic (talk) 00:52, 4 December 2019 (UTC)
 * Looks much less like Neuquensaurus now, however the scale bar probably should be shortened to a rounded 9.4m because of uncertainties and the sternal is shown as part of the scapula right now. It should be in lateral view (currently in ventral) and placed below the coracoid as the ventral surface of the chest. IJReid { {T - C - D - R} } 02:05, 4 December 2019 (UTC)
 * Jeez, I can't believe I got that wrong, already fixed. PaleoNeolitic (talk) 03:09, 4 December 2019 (UTC)
 * This is markedly improved! I still have a few concerns. The preserved length of the humerus is around 460 mm, but you show the preserved portion as being only 350 mm long. The soft-tissue outline around the elbow doesn't seem to quite line up with the distal end of the humerus properly. The tibia still looks a bit too short for a non-saltasaurid titanosaur. The posterior dorsal is depicted too far back—it's in the position of the first or second sacral, not a dorsal. Ornithopsis (talk) 04:43, 4 December 2019 (UTC)
 * Alright, issues fixed, how does it look like now? PaleoNeolitic (talk) 00:34, 5 December 2019 (UTC)
 * You haven't uploaded the new version yet ... IJReid { {T - C - D - R} } 01:05, 5 December 2019 (UTC)
 * Whoops.... what a fatal error, uploading it briefly. PaleoNeolitic (talk) 02:02, 5 December 2019 (UTC)
 * Assuming the measurements are now accurate, the last thing I'd say is to move the dorsal rib forwards at least one vertebra length, its currently in the sacrum. But other than that, proportions look about right and material is shown properly. IJReid { {T - C - D - R} } 15:35, 5 December 2019 (UTC)
 * This is getting into minor details, but the preserved portion of the humerus still looks a little short to me, unless you intended the grayed-out portion to include the incomplete last 10 cm of the shaft in which case it's now too long (and I hadn't realized that might've been your intention previously, so if it was I'm sorry for the confusion) and IJReid is right about the placement of the dorsal rib. I think that the posterior dorsal could do with being slightly further forward, it still looks like it might be the first sacral to me. Other than that I have no more complaints. Ornithopsis (talk) 16:48, 5 December 2019 (UTC)
 * This is very minor, but I'd recommend taking out the 9.4m scale bar altogether, as the 1m one makes it redundant. It's also not clear if the 9.4m bar represents 9.4m, in which case this isn't the axial length of the sauropod, or if it represents the axial length of the sauropod, in which case it doesn't represent 9.4m. Hopefully I'm not sounding too confusing. --Slate Weasel (talk | contribs) 22:53, 5 December 2019 (UTC)

Velocipes


This image by DeviantArt paleoartist "cisiopurple" was added onto the page without review (the archives don't mention this). The artist says it's okay to add it here as it was credited (https://www.deviantart.com/cisiopurple/art/Velocipes-810348638), but I know Wikipedia doesn't simply accept images like that. Strangely, his Eotyrannus, which was added to the Wessex Formation by User:OviraptorFan in March 2019, but it was deleted due to being non-free (per https://commons.wikimedia.org/wiki/Commons:Deletion_requests/File:Eotyrannus_cisiopurple.jpg). In light of this, what should we do to this Velocipes? Atlantis536 (talk) 10:25, 8 December 2019 (UTC)
 * Needs to be tagged with "no permission" on Commons then. We need either that the Deviantart page specifies a free license, that the artist uploads the image to Commons, or confirms a free license per email to WP:OTRS. FunkMonk (talk) 14:22, 8 December 2019 (UTC)
 * I've gone ahead and explained the three options on DA, I'll see what happens now. But yeah as it is right now the image can't be up. IJReid { {T - C - D - R} } 16:43, 8 December 2019 (UTC)
 * I guess Cisiopurple is not going to change the license? A deletion request is in order, I think. Lythronaxargestes (talk &#124; contribs) 07:01, 10 December 2019 (UTC)

Concavenator skull diagram
Redrawn from the 3d model shown in this figure from "The cranial osteology of Concavenator corcovatus (Theropoda; Carcharodontosauria) from the Lower Cretaceous of Spain" published last year. It's my first attempt at doing something like this so sorry if some of the linework is a bit sloppy. Hemiauchenia (talk) 02:09, 10 December 2019 (UTC)
 * The first thing I see is that the postorbital is dorsoventrally shifted in the fossil so its overlapping the orbit in the restoration. IJReid { {T - C - D - R} } 03:01, 10 December 2019 (UTC)
 * The fossil is laterally crushed, so bone movement is likely. Is it evident in the figure? The boundaries of some of the bones are a bit ambiguous due to the fact that the render has shadows. The render is somewhat confusing as it appears to be trying to be fully 3d while also not fully restoring the skull, opting to not restore the palate complex for instance. Hemiauchenia (talk) 03:19, 10 December 2019 (UTC)
 * I would recommend making Concavenator's diagnostic features more obvious. These include the three connected fossae on the nasal, the elongated narial fossa, and the very thick and rounded postorbital boss. Those features are probably the most important aspects of the skull considering they distinguish Concavenator from other carcharodontosaurians. Maybe you can also add in some shading to indicate which portions were reconstructed, not preserved. Fanboyphilosopher (talk) 03:27, 11 December 2019 (UTC)

I've made the requested changes, thoughts? Hemiauchenia (talk) 18:20, 12 December 2019 (UTC)
 * It's looking good. Fanboyphilosopher (talk) 18:39, 12 December 2019 (UTC)
 * Given that this is an interpretive drawing of an image of a 3d model rather than just a simple redrawing of a 2d image, I assume I am ok to release this? Hemiauchenia (talk) 21:18, 10 December 2019 (UTC)
 * I'd think it's ok, since the 3D model is based on an actual specimen, which is not copyrightable. FunkMonk (talk) 21:35, 10 December 2019 (UTC)

Shaochilong skull reconstruction
I was just going through the dinosaur skulls categories in wikicommons and happened to come across this image. despite being a 2d drawing, various parts of the image appear to be out of focus. I presume this is a somewhat strange method of showing reconstructed portions? Accuracy of the drawing aside, I personally find the colour scheme to be quite garish. Hemiauchenia (talk) 22:06, 10 December 2019 (UTC)
 * I think the colours are no less garish than some of our other skull diagrams, but I'm concerned about all of the bones coloured roughly the same shade of orange. Lythronaxargestes (talk &#124; contribs) 22:15, 10 December 2019 (UTC)
 * As someone who creates "garish" skull diagrams, even I am disappointed in the lack of effort put into this diagram, for all of the reasons outlined previously. I personally space out my bright colors and utilize a wide range of hues and intensities to make them clear and crisp. So in my opinion having flashy color coding is not a problem, but having an ugly skull diagram with fuzzy lines and roughly equivalent shades of dull yellow is certainly a problem. In terms of the actual accuracy of the diagram, it's also completely inconsistent with the actual shape of the preserved bones (a maxilla, quadrate, and part of the skull roof and braincase). The maxilla (grey) is much longer than it should be, and it has a massive narial indentation not present on the fossil. The nasals (pink) and frontals (red) have weird bulbous crests not evident on the fossil. The quadrate is missing is quadrate flange. The skull as a whole was reconstructed as quite elongated, completely missing the point of Shaochilong's characteristicly short skull by carcharodontosaurian standards. Fanboyphilosopher (talk) 03:12, 11 December 2019 (UTC)
 * Sorry If my comment on the colour schemes came of as an attack, I wasn't even thinking about your images when I made the comment. I really like your bright colour schemes, it evokes the nostalgic memories of being on enchanted learning and paleos in the mid aughts. I personally thought this particular colour scheme was garish as they completely avoid primary colours and go for strange colour choices. Hemiauchenia (talk) 03:30, 11 December 2019 (UTC)
 * No offense taken. Fanboyphilosopher (talk) 03:37, 11 December 2019 (UTC)


 * The fuzzy lines and lack of teeth are unfortunate. It just doesn't look good, regardless of colouration. FunkMonk (talk) 08:40, 11 December 2019 (UTC)
 * I could work on a new skull diagram for this guy over the next four days or so if it's desired. I have a Carcharodontosaurus skull reconstruction that I could use as a base for this. --Slate Weasel (talk | contribs) 22:35, 11 December 2019 (UTC)
 * I wouldn't recommend adapting a Carcharodontosaurus diagram, Shaochilong was quite basal and had peculiar proportions. Fanboyphilosopher (talk) 23:55, 11 December 2019 (UTC)
 * A good skeletal was already made by Franoys ^ that shows the skull if you wish. IJReid { {T - C - D - R} } 02:51, 12 December 2019 (UTC)
 * I actually have quite a lot to work on, so I probably won't get around to completing this anytime soon (sorry about that). However, while we're on the subject of carcharodontosaurids, have there been any size estimates published for Taurovenator? Scaling it after Carcharodontosaurus produced an animal >9m long, but I'm not sure how well I did with the scaling (I'm working on a Huincul Formation dinosaur size comparison). --Slate Weasel (talk | contribs) 23:05, 13 December 2019 (UTC)
 * I believe it was recently lumped into Mapusaurus? I dont recall which paper but I do remember hearing that. IJReid { {T - C - D - R} } 00:39, 14 December 2019 (UTC)
 * I think that it may be in the Lajasvenator paper. I don't have access to it, though, so I'm not sure. But I suppose that that solves my problem! --Slate Weasel (talk | contribs) 01:40, 14 December 2019 (UTC)
 * That's right -
 * "The autopomorphies proposed to support this taxon consist of the presence of a horn-like prominence on the orbital brow, and a deep excavation on the ventral surface of the postorbital. However, these features are present in Mapusaurus (MCF-PVPH-108.177) and, although less developed, are also in Giganotosaurus (MUCPv-CH-1). The holotype specimen MPCA PV 802 of Taurovenator also exhibits the ventrolateral curved lateral margin of the palpebral (Motta et al., 2016, figs. 4 and 5), a diagnostic feature proposed for Mapusaurus roseae (Coria and Currie, 2006). Considering that the holotype specimen of Taurovenator (MPCA PV 802) was collected at the same stratigraphic level as Mapusaurus (Huincul Formation), and that there are no further autopomorphies in that single postorbital, it seems more reasonably to consider Taurovenator violantei as junior synonym of Mapusaurus roseae."
 * (pg.23) Lythronaxargestes (talk &#124; contribs) 03:48, 14 December 2019 (UTC)

Segnosaurus new skeletal
Something I've been finishing up for a while, just a skeletal of Segnosaurus. The material itself has already been layed out and articulated, Once I get the silhouette finished it'll be easier to display the anatomy. I'm going to be copying Headden's skeletal a bit more in only showing the known material, but it's a vastly different pose, and I won't fully restore the caudals since I have no real basis for their anatomy. IJReid { {T - C - D - R} } 16:08, 28 December 2019 (UTC)
 * Interesting, I didn't know the hand claws were so short and curved though? The papers gave me the impression that they were long and straight? FunkMonk (talk) 16:30, 28 December 2019 (UTC)
 * The claws themselves are stand-ins for Segnosaurus, but the proportions of them are correct according to the measurements and proportions given by the papers. I'm going to show them in "dorsal" view anyways so their curvature won't be visible. IJReid { {T - C - D - R} } 23:18, 28 December 2019 (UTC)
 * Perle 1979 is all we have to go by, he says "The ungual phalanx of the third digit is somewhat longer than the second phalanx and is quite flat transversely. The ungual is sharply curved, very pointed and compressed laterally. Its ventral tubercle for the attachment of the flexor tendons is thick and massive". I wonder what "quote flat transversely, sharpy curved, very pointed" means. But yeah, probably more curved than in my old restoration then... Headden's old silhouette doesn't show the claws that curved either, but I don't know what he based them on: FunkMonk (talk) 00:58, 29 December 2019 (UTC)
 * I think I have it mostly complete now, including a 2m vertical and horizontal scale bar. Are there any fixes needed? IJReid { {T - C - D - R} } 02:15, 30 December 2019 (UTC)
 * I think adding reconstructed portions of the bones of the hips and sacrum would be nice, to highlight what parts of the bone are missing. Obviously in a different, presumably lighter shade of grey to the tail vertebrae. Also, the contacts of the individal tail vertebrae should be made distinct Hemiauchenia (talk) 02:47, 30 December 2019 (UTC)
 * I've updated the tail to account for the correct number and placement of vertebrae, and probably the correct approximate anatomy. I'm hesitant to restore the unknown regions of the known bones because of their high variability, and the fact that they don't add much apart from maybe make the pelvis articulations clearer. IJReid { {T - C - D - R} } 23:00, 30 December 2019 (UTC)
 * Is there a reason why the caudals are not grey anymore? Lythronaxargestes (talk &#124; contribs) 03:23, 31 December 2019 (UTC)
 * The caudals are now actually restored, they are just as figured as the entire pes in lateral view, tibia, femur, or hand so really unless they are all shown in grey none of them should be. The caudals were a special case at first because I didn't want to put in the time to try and restore 25 vertebrae. But then I did. IJReid { {T - C - D - R} } 04:36, 31 December 2019 (UTC)
 * A bit sad that the thigh overlaps the pubis? Is there some way they could be more free of each other? Maybe if the foot placement was inverted? FunkMonk (talk) 15:23, 31 December 2019 (UTC)
 * I could invert the feet, it would take a decent bit though. Not much is really lost but a quick solution like I've done before could be to have dashed grey lines showing the outline of the underlying pubis. If the bone was more complete I'd consider it more of a worthwhile change but all thats lost is a little corner of the proximal bone and showing the edges of the boot. IJReid { {T - C - D - R} } 18:38, 1 January 2020 (UTC)
 * In any case, it already makes for a much better taxobox image. Where did you found versions of the old Russian papers with figures? FunkMonk (talk) 04:26, 2 January 2020 (UTC)
 * I didn't get it myself so I really don't know, but I was given it by someone who also happened to want me to finish an updated Segnosaurus skeletal. Generally contacting authors who reference the old studies is a good method though, I've used it before for other papers. IJReid { {T - C - D - R} } 07:31, 2 January 2020 (UTC)
 * Can you add which sources have been used when creating the image in the file description? I'm sure it'll be asked during FAC... FunkMonk (talk) 20:00, 2 January 2020 (UTC)
 * It has been done. That should be all the references and taxa used except Nothronychus which I used for the tibia based on a 3D scan online. IJReid { {T - C - D - R} } 20:34, 2 January 2020 (UTC)


 * I suppose that I should update the size comparison now. I'll see if I can get that in along with Tarbosaurus. --Slate Weasel ⟨T - C - S⟩ 01:28, 4 January 2020 (UTC)
 * Yeah, the legs look especially skinny now. FunkMonk (talk) 05:19, 4 January 2020 (UTC)
 * Here the new size chart is. It grew... considerably. It loooks a lot less elegant and more like a typical therizinosaur now. I also reduced the caudal feathering. How does it look? --Slate Weasel ⟨T - C - S⟩ 19:20, 5 January 2020 (UTC)
 * I think the chart looks alright. Leaving it up to Funk now for the FA. IJReid { {T - C - D - R} } 22:46, 5 January 2020 (UTC)
 * Looks more typical, Headden's old image also has some weird choices, with all of the animals being tilted forwards, perhaps before they were recognised as walking rather upright? I wonder if this one still needs to be more upright. FunkMonk (talk) 07:28, 7 January 2020 (UTC)


 * And now we're at it, I made some changes to my old restoration, mainly in making the first toe visible, the hand claws shorter, the curve of the lower jaw more apparent, and reduced some scales on the head. Any thoughts? Still not sure how curved the hand claws should be. FunkMonk (talk) 07:48, 7 January 2020 (UTC)
 * I would make the claws a bit curvier just to match Perle's description, but nothing is too certain. The tail may also need to be elongate to match with just the larger number of caudals. Interestingly headden's skeletals were all used by Zanno 2010 in silhouette form, I noticed that when I looked at it for the material. IJReid { {T - C - D - R} } 00:37, 8 January 2020 (UTC)
 * Yeah, suprisingly long tail, but I think the perspective in the restoration makes up for it, and that the tail would become too long if I lengthened it (the curve makes it seem a bit shorter, but it was based on Headden's image, which has an even longer tail). But yeah, if the claws were as curved as for example those of Nothronychus, they definitely need an overhaul. Speaking of the claws, shouldn't they be lengthened by keratin in the skeletal silhouette? FunkMonk (talk) 10:33, 8 January 2020 (UTC)

Nemegtonykus
, what do you think?--Bubblesorg (talk) 23:46, 30 October 2019 (UTC)
 * First of all, Mesozoic dinosaurs go on WP:DINOART, not here. Second, what's this based on? Scaling to roughly equal (sometimes estimated) humeral length, it doesn't proportionately match the skeletal in the paper, Mononykus, Shuvuuia, or Linhenykus. Third, it needs more detail and is missing shading, which, when present, makes reconstructions look much more realistic. Also, why's the sky bright cyan? Fourth, why this view in particular? The only known material in this region is the scapulocoracoid, while the animal preserves a nearly complete posterior trunk, tail, and leg. I'm sorry, but I think that this image is going to need a lot more work to get it up to standards. --Slate Weasel (talk | contribs) 00:05, 31 October 2019 (UTC)

Understood, thank you for your input--Bubblesorg (talk) 00:24, 31 October 2019 (UTC)
 * It does seem baffling that the image shows the only part of the animal that isn't preserved... FunkMonk (talk) 08:35, 31 October 2019 (UTC)
 * Bubblesorg, you really need to work on how you go about this whole process before attempting more paleoart reconstructions. For one, put the entire animal in the frame. I remember once you said you only did half of the animal because it's easier. You can't do that. Second, if you're gonna put a background, put a background, not just a single color nor a single color with some dashes. You can also not put a background. Third, read up about the animal before reconstructing it. You can't just start drawing whatever you want. Fourth, why does it have a orange beak?  User:Dunkleosteus77 &#124;push to talk 05:06, 1 November 2019 (UTC)
 * I question whether this level of MS Paint art is even appropriate for an encyclopedia. In particular, what informational value does this image add if it's not a rigorous reconstruction of the animal? (And I would argue that many of our older images also have the same problems, although they are probably of a higher calibre.) Lythronaxargestes (talk &#124; contribs) 06:49, 1 November 2019 (UTC)
 * Some images, if they are clean and accurate enough, with minimal detail can be useful for illustrating proportions of an animal (like black silhouettes in phylogeny templates). But that requires cleanliness and accuracy, which this piece doesn't have. IJReid { {T - C - D - R} } 23:43, 1 November 2019 (UTC)
 * Yes, by "rigorous" I was referring not necessarily to artistic expertise, but instead to adherence to scientific data rather than whatever freehanded stuff the artist comes up with (infamous case in point: ) Lythronaxargestes (talk &#124; contribs) 01:26, 2 November 2019 (UTC)
 * I dont make my stuff on MS paint, I make them on gimp--Bubblesorg (talk) 17:28, 5 November 2019 (UTC)
 * I would recommend to either draw on paper (and to scan the result in), or use a drawing tablet (there are cheap ones available) and dedicated drawing software (Krita is great free software for this purpose). This makes it much easier to improve and one day become a professional. --Jens Lallensack (talk) 17:57, 5 November 2019 (UTC)
 * I think that the program that it's drawn in (whether it be MS Paint, GIMP, or Krita, although the first one is poorly designed for paleoart) is irrelevant as long as the art meets our standards. For the record, I do actually draw a lot using GIMP and Inkscape (for instance, my Bajadasaurus was drawn using these two programs). But I do draw in rather strange ways, so it may be better to try out programs that are more dedicated to digital painting. --Slate Weasel (talk | contribs) 22:07, 8 November 2019 (UTC)

Buriolestes again
Wow, wow, wow Let me congratulate you all, you have done a great and beautiful job all these years.The reason for my partial inactivity is because of the school, I am barely on vacation from university and I have given myself a break to return. Well, after so much idle time. I return with 2 of the drawings I left pending. The first is perhaps one that waited too long. In these years many articles of the Saturnaliinae family were seen and I did not go unnoticed, I still have not finished reading them and seeing everything, but I feel that both the articles and the images of all the taxa require attention, expansion and improvements. Well, I show you a preview of the Buriolestes profile illustration, I have started from scratch and I have attended to the errors and anatomical issues that had to be corrected. In addition to this I would like to revisit the fantastic restoration of User:Audrey.m.horn in general is impeccable and very good in every aspect, I think that Buriolestes from the beginning needed an illustration of the whole body. I think the placement of the ear is too far in the skull, just that. Any comment? --Levi bernardo (talk) 04:33, 12 December 2019 (UTC)
 * thanks for the compliment on my restoration! i'm afraid i'm not completely sure what you mean about the ear - is it too far forward, or too far backwards? as for your skull restoration, i think it's great! i would point out though that the skull fenestrae wouldn't be quite so visible on the living animal, maybe tone down the shading a little bit! Audrey.m.horn (talk) 04:57, 12 December 2019 (UTC)
 * oh just kidding i didn't notice your notes on my image. i'll fix it in the next few days, thanks for showing me! Audrey.m.horn (talk) 04:58, 12 December 2019 (UTC)
 * No problem. This usually happens. True, don't worry, it's just the lines coming out to become shadow and textures. Fenestrae will be covered, and Thanks for your attention. --Levi bernardo (talk) 05:41, 12 December 2019 (UTC)
 * I see nothing wrong with your new head drawing as it stands, the proportions match up completely and soft tissue fits what we expect. IJReid { {T - C - D - R} } 15:52, 12 December 2019 (UTC)
 * fixed the ear Audrey.m.horn (talk) 18:16, 24 December 2019 (UTC)
 * Great, much better. By the way I show you a progress in the illustration in which I look a little confused. Isn't Buriolestes supposed to be a relative of Eoraptor? Well, I see that it would be right to stretch the image up to make it look more like Eoraptor. Both skulls are deformed, but I think it would be better to do it more like the last image of these I would like to know your opinions before continuing. --Levi bernardo (talk) 03:46, 26 December 2019 (UTC)
 * I think both interpretations of the skull are accurate within our known information, since some taxa just outside dinosauria have elongate snouts (lewisuchus etc) and some basal theropods do as well (coelophysids). IJReid { {T - C - D - R} } 05:25, 26 December 2019 (UTC)
 * I disagree with the philosophy that Buriolestes and Eoraptor must have similar skull proportions if they are closely related. Both of their descriptions included skull diagrams which had already been corrected for taphonomic deformation. Buriolestes simply had a longer and lower skull than Eoraptor. Fanboyphilosopher (talk) 20:05, 26 December 2019 (UTC)


 * Looks good, but the finger tip "pad" morphology of the two hands differ in their perspective: the hand closest to the viewer would indicate that the pads would overlap the underside of the claws, while the claws further back are free. A bit hard to explain, I can draw on top of it is unclear. But you can see what I'm getting at in for example Fred's Allosaurus image: FunkMonk (talk) 22:21, 26 December 2019 (UTC)
 * fixed the finger pads Audrey.m.horn (talk) 20:09, 30 December 2019 (UTC)
 * I think the full body restoration looks good, just waiting on Levi. IJReid { {T - C - D - R} } 22:46, 5 January 2020 (UTC)
 * Ok, I have been a little stuck with this illustration, especially because it encourages me to make scales, I hope soon to make the neck and edit the final image to give texture to the drawing. --Levi bernardo (talk) 19:31, 8 January 2020 (UTC)
 * Finally the version of the head is corrected, well, I think the illustration no longer fits on the Buriolestes page, I think that in the future it could be expanded and fit, but for now I think it could have a better place in the Sauropodomorpha article in the Paleobiology section. I will continue editing the image in the following weeks, it still does not end at all. --Levi bernardo (talk) 22:14, 19 January 2020 (UTC)
 * Should be fine, unless someone has anything to add? FunkMonk (talk) 17:05, 16 May 2020 (UTC)