Pressed wood

Pressed wood, also known as presswood, is any engineered wood building and furniture construction material made from wood veneers, wood shavings and particles, sawdust or wood fibers bonded together with an adhesive under heat and pressure.

Preparations of the veneers
The creation of pressed wood begins with the veneers being placed in a rotary dryer. This dryer is typically heated with steam at around 400 degrees Fahrenheit. This process prepares the veneers for the humidifying process in which the veneers are then placed into humidification chambers. These humidification chambers have a precise moisture content.

Applying adhesive to the veneers
After the veneers have been prepared, resin adhesive is applied to the top of the veneer and then rolled for equal distribution on top of the veneer. Next, another veneer with a perpendicular grain pattern is applied on top. This process is then repeated until the desired thickness of the board is met.

Pressing
Once the board is at it's desired thickness, the board is placed into a press, where the board is pressed and heated. This process gives pressed wood its strength advantage over other engineered wood types.

The boards are placed in a press where the press will press down on the boards with roughly 400 psi of pressure. At the same time, the boards will also be heated up to 300 degrees Fahrenheit—this heat and pressure cause the adhesive to cure, forming the finished board.

Construction
Presswood is very commonly used in the construction of houses and other buildings. Because of pressed wood’s high strength and versatility, it works very well for structural constructions.

Pallets
Pressed wood is a very common material used to make wooden pallets. This is because of how cheap pressed wood can be and how pallets can easily be constructed out of pressed wood.

Furniture
Because of Pressed Wood's strength and versatility, it works very well for structural parts of furniture.