Talk:Mercury-arc valve

Clarity
This article does not explain things quite well enough. The purpose of the excitation electrode is unclear. A simple circuit diagram that includes the anodes, cathode, and excitation electrode would be enormously helpful. Benandorsqueaks 05:01, 25 December 2005 (UTC)

I've tried cleaning up this article a bit but I've got to hit the books on this one. I hope Mr. Deutsche-Volt will lay off the poor translations for a while. --Alexwcovington (talk) 21:43, 28 Mar 2005 (UTC)
 * Whew. Agreed.  There's whole paragraphs here that are baffling. I'll have a hack or two at cleaning this up - it's worth having this because most of the HVDC project articles refer to mercury arc valves. --Wtshymanski 17:33, 29 Mar 2005 (UTC)

Picture trouble
WHen I click on the picture I uploaded for the article, I can't see it, only it's description page. What did I do wrong and how do I fix it? --Wtshymanski 03:27, 4 Apr 2005 (UTC)

Legacy DC power grids
Static inverter stations were used to provide DC power to legacy Edison style DC power grids in urban centers until the 1950's. These were in use in Helsinki until about 1950 and in the UK even longer. Who knows more about this? -- Petri Krohn 06:45, 10 January 2006 (UTC)


 * The UK had a DC link scheme between Kingsnorth power station on the Isle of Grain in Kent and Beddington in South London and Willesden in North London. There were 3 converter stations and the Kingsnorth station used controlled mercury valves to rectify the generator output into plus and minus 266 kV DC.  The positive pole fed the Beddington station which used identical valves but operating as inverters.  The negative pole similarly fed Willesden.  The scheme also allowed Beddington or Willesden to operate as rectifiers and feed power to the other, but such operation was never required.  The scheme was still operational in the early 1980's, but is no longer in operation. 20.133.0.14 13:52, 14 March 2007 (UTC)

Explosion hazard
I'd like to see a valid reference for the "double layer explosion hazard" - unfortunately I can't tell if this is just advanced plasma physics beyond my ken or absolute pseudoscience. A Google search was very dishearting, only producing a couple of astrophysics papers. In all my years of reading about HVDC systems I've never seen any reference to "explosions" as a particular hazard of mercury arc rectifiers, and the Wikipedia is the only place I've found this association, which makes me highly dubious. --Wtshymanski 19:56, 14 January 2007 (UTC)


 * You got a pair of valid references in the newer version you just reverted:
 * Alfvén H & Carlqvist P. Currents in the solar atmosphere and a theory of solar flares Sol. Phys. 1:220-8. 1967 . Retrieved on 2010-02-08.
 * Double Layers in Astrophysics, Proceedings of a workshop held at George C. Marshall Space Flight Center Huntsville, Alabama, March 17–19, 1986, NASA Conference Publication 2469
 * The former reference contains a brief description of the issue. The latter has a detailed description of the problematics on pages 15-16 of the PDF file. I believe the phenomenon deserves a mention and a NASA publication has enough weight to back it. Alternatively, please explain why you labeled it as "nonsense". --Shaddack (talk) 20:00, 4 September 2010 (UTC)


 * Do the sources, or either one of them specifically speak of explosion hazard in mercury arc valves? -- Petri Krohn (talk) 07:37, 5 September 2010 (UTC)
 * It looks like the astrophysics paper hosted on the NASA domain does refer to mercury arc valves. My issue is that none of the papers on mercury arc valves refer to this astrophysics phenomenon. It seems very peripheral and irrelelvant to how these devices were used and a long dissertation here is not germane to illustrating the use and issues of mercury arc valves. Mercury arc rectifiers didn't "explode" - is this paper perhaps talknig about flashback?  --Wtshymanski (talk) 13:26, 7 September 2010 (UTC)

London Underground
Mercury arc valves/rectifiers are still used on the London Underground. They were used for both traction and electric lifs.

This page shows on in use on 27th January 2000 still powering the lift of an air-raid shelter at Belsize Park London Underground Station:

http://www.subbrit.org.uk/rsg/sites/b/belsize_park/index.html

--217.18.21.2 18:31, 9 February 2007 (UTC)


 * There are many examples of mercury arc rectifiers still in operation, mainly in places where the cost of replacement is not considered worthwhile because the use is not intensive enough. The mercury arc rectifier, generally never wears out. 20.133.0.14 13:52, 14 March 2007 (UTC)

Others
The statement about Tungar rectifiers in the "Others" section should be clarified to indicate that these are not based on Mercury vapor, but rather Tungsten (electrodes) and Argon (gas), thus Tung-Ar.

32.97.110.142 18:15, 13 September 2007 (UTC)Dave
 * Noted; moved the description to the rectifier article in with the other electron tube devices. --Wtshymanski 21:07, 13 September 2007 (UTC)

Efficiency
" Before the advent of solid-state devices, mercury arc rectifiers were the most efficient form of conversion from alternating to direct current."

not by a long way. Mechanical rectifiers waste a fraction of the power, and were used in many applications before and after the invention of the mercury rectifier. 62.253.52.61 (talk) 17:47, 9 June 2008 (UTC)
 * Cool. Do you have a reference? Were people still buying rotary converters for DC supplies after mercury arc rectifiers came along? --Wtshymanski (talk) 21:24, 9 June 2008 (UTC)

Nice Reference
McGraw-Hill's Engineering Companion from google books --Stone (talk) 09:44, 5 March 2009 (UTC)

Properties of mercury
What properties of mercury are important for the function of this device? Is the liquid state of mercury not important for operation, only the electrical conductivity? Can the device operate lacking the electric arc?--84.232.141.38 (talk) 17:08, 12 April 2011 (UTC)
 * Ionization is the key bit. A mercury arc valve without an arc isn't operating, but you can have an arc without mercury. --Wtshymanski (talk) 18:09, 12 April 2011 (UTC)
 * How about vapour pressure of mercury? Is it important for the arc?

If there is arc without mercury, then mercury can be replaced with other metals like NaK, galinstan.--84.232.141.38 (talk) 17:14, 20 April 2011 (UTC)
 * That's original reserach and out of bounds for the article. Have you seen anyone actually using other metals? Certainly a "mercury free" fluourescent lamp would be a hot seller, but the fact that no-one seems to be offering this indicates it's not the melting point, but the behaviour of mercury on ionization (and the energy of the photons it gives off) that is the key property. --Wtshymanski (talk) 17:58, 20 April 2011 (UTC)
 * How is the ionization expressed by a quantity? If electrical conductivity is the answer (and perhaps ionization energy), then galinstan's conductivity is about three times greater than mercury's (by comparing data presented in articles). A straighforward comparation is not OR.

On the other hand galinstan is a recent development, but there must be some sources published somewhere refering to the investigation of other metals' appropiateness/suitability for the purpose discuted here. --84.232.141.38 (talk) 18:12, 1 May 2011 (UTC)

Johann Sahulka
Did the work of Johann Sahulka precede that of Peter Cooper Hewitt? Biscuittin (talk) 22:06, 2 November 2014 (UTC)


 * Yes -- Sahulka seems to have done that work in 1894, whereas Peter Cooper Hewitt only did so in 1902. 2A02:2C40:100:B001:0:0:1:BC26 (talk) 13:40, 18 April 2024 (UTC)

Sequence of anode wiring
In three phase, full-wave rectification with 6 anodes, there are multiple ways to wire the anodes. You could wire them so that the arc always progressed to the adjacent anode (either CW or CCW). You could wire them so that the arc never progressed to an adjacent node. Was there any benefit to doing it a certain way? If the anodes were wired progressively, did CW/CCW interact with the chosen anode arm orientation? (The one schematic of a 6 anode seems to suggest none of this was considered.) Temblast (talk) 16:25, 16 January 2016 (UTC)
 * This has the answer for what the sequence is, but it doesn't say why. I would guess that it is because the further away the next anode is, the harder it is for it to pick up the arc. SpinningSpark 16:50, 16 January 2016 (UTC)

Magnetostriction
At present the article lists one of the methods of striking the arc as involving "magnetostriction" to displace the mercury. Since magnetostriction is an effect present in ferromagnetic materials only and mercury is not ferromagnetic, I don't think this is correct. Rather I think that the author means that the mercury is dispersed by Lorentz forces acting internally in the mercury due to its own magnetic field (from carrying current) and the electrons flowing through the mercury due to the current flow. Sbreheny (talk) 05:39, 3 March 2016 (UTC)

plural of trolleybus
Re this "spelling correction". Both Wiktionary and the OED give buses as a correct plural. The trolleybus article uses the plural trollybuses. There may be a difference in UK/US usage here, in which case the issue is within the scope of the WP:ENGVAR guideline. SpinningSpark 18:18, 18 April 2016 (UTC)
 * Agreed. Can't see any source for "trolleybusses" anywhere. Andy Dingley (talk) 18:33, 18 April 2016 (UTC)

Who?
Meneuvrier and Jemin are so obscure, they don't even show up on Wikipedia. "History of Electron Tubes" by Sogo Okumura gives a snippet on Google Books which seems relevant, but I don't have the book. Other snippets show up, but they don't seem to figure in the mainstream of mercury rectifier development. But "Cooper Hewitt Mercury" gives thousands of hits on Google Books. --Wtshymanski (talk) 19:25, 24 June 2017 (UTC)
 * I agree with your last edit. Observing an effect and using that effect to invent a device are two different things. SpinningSpark 08:23, 25 June 2017 (UTC)
 * It would be appropriate to mention them in the history as observing the effect but clearly not altering Hewitt as the inventor imho. MartinezMD (talk) 20:50, 25 June 2017 (UTC)
 * Also relevant is whether Cooper-Hewitt was aware of Meneuvrier and Jemin's work. SpinningSpark 22:12, 25 June 2017 (UTC)
 * For that matter, were Meneuvirer and Jemin aware of Johann Sahulka? --Wtshymanski (talk) 23:43, 25 June 2017 (UTC)


 * Both names were misspelled. It is fixed now. Pavel Vozenilek (talk) 05:11, 23 May 2023 (UTC)

Mercury-arc valve ?
Wikipedia has long insisted on calling the mercury-arc rectifier a mercury-arc valve (despite its completely different operating principle). Is there any sourcing to back this up? Rather than post facto citogenesis? Andy Dingley (talk) 15:03, 15 July 2019 (UTC)


 * How far back of a source would be needed? In this 2004 book, they are referred to as valves. "Hot-cathode mercury arc rectifier with grid control (thyratron) was developed by Langmuir in 1914. These valves were of two types." MartinezMD (talk) 15:27, 15 July 2019 (UTC)


 * That's a 2004 book. It's no indication that Langmuir called them 'valves' back in 1914. My 1910-era electrical books don't.
 * Now I can understand if this turns out to be a US term. But I spent the '70s collecting these things in the UK and never heard them called either valves or tubes (and I had my hands on plenty of high power valves too). They were always mercury-arc rectifiers. Andy Dingley (talk) 16:17, 15 July 2019 (UTC)
 * My understanding is valve is typically a UK term, tubes in the US. See Vacuum tube and British Valve Association. Would need to do more research for the mercury version, but the Fleming rectifier was called a "valve" fairly early. "The Thermionic Valve and it's developments in Radiotelegraphy and Telephony" J.A. Fleming. 1919 The Wireless Press, LTD" is listed in this article's bibliography as an example from the same era. MartinezMD (talk) 18:29, 15 July 2019 (UTC)
 * But Fleming's rectifier (and de Forest's triode) are 'valves', by the way which became accepted for such. A mercury-arc rectifier might (sometimes) be made of glass, but it doesn't work the same way at all. Andy Dingley (talk) 18:43, 15 July 2019 (UTC)
 * I understand what you are saying. I'm just pointing out that many of these devices were called valves from the beginning, and now certainly are often referred to as valves. I think it's going to take a bit of investigation to see how early the mercury rectifier was called a valve, and from my initial reading of his patents, he didn't call it a rectifier or a valve, simply an "apparatus for transforming electrical energy".MartinezMD (talk) 18:53, 15 July 2019 (UTC)